THE SIMULATION OF CORROSION DEGRADATION OF CONCRETE SPECIMEN IN STATIONARY HEAT AND MOISTURE CONDITIONS
References
- Ožbolt, J., Oršanić, F., Balabanić, G. (2017). Modelling processes related to corrosion of reinforcement in concrete: coupled 3D finite element model. Structure and Infr. Engin. Maintenance, Management, Life-Cycle Design and Performance, 13(1), 135–146.
- Saetta, A., Scotta, R., Vitaliani, R. (1998). Mechanical behaviour of concrete under physicalchemical attacks. Journal of Engineering Mechanics, 124(10), 1100–1109.
- Koniorczyk, M., Gawin, D. (2008). Heat and moisture transport in porous building materials containing salt. Journal of Building Physics, 31(4), 279–300.
- Dao, L. T. N., Dao, V. T. N., Kim, S-H., Ann, K, Y. (2010) Modelling steel corrosion in concrete structures – part 1: a new inverse relation between current density and potential for the cathodic reaction. International Journal of electrochemical science, 5(3), 302–313.
- Dao, L. T. N., Dao, V. T. N., Kim, S-H., Ann, K, Y. (2010). Modelling steel corrosion in concrete structures - part 2: a unified adaptive finite element model for simulation of steel corrosion. International Journal of electrochemical science, 5(3), 314–326
- Bentur, A., Alexander, M. G. (2000). Engineering of the interfacial transition zone in cementitious composites. Materials and Structures, 33(2), 82–87.
- Horne, A. T., Richardson, I. G., Brydson, R. M. D. (2007). Quantitative analysis of the microstructure of interfaces in steel reinforced concrete. Cement and Concrete Research 37(12), 1613–1623.
- Ollivier, J. P., Maso, J. C., Bourdette, B. (1995). Interfacial Transition Zone in Concrete. Journal of Advanced Cement Based Materials, 2(1), 30–38.
- Bentur, A., Diamond, S., Mindess, S. (1985). Cracking processes in steel fiber reinforced cement paste. Cement and Concrete Research, 15(2), 331–342.
- Liu, Y. (1996). Modelling the Time-to-Corrosion Cracking of the Cover Concrete in Chloride Contaminated Reinforced Concrete Structures (PhD thesis, Virginia Polytechnic Institute and State University). USA, Blacksburg, Virginia,.
- Chen, D., Mahadevan, S. (2008). Chloride-induced reinforcement corrosion and concrete cracking simulation. Cement & Concrete Composites, 30(3), 227–238.
- Bhargava, K., Ghosh, A. K., Mori, Y., Ramanujam, S. (2005). Modelling of time to corrosion-induced cover cracking in reinforced concrete structures. Cement and Concrete Research, 35(11), 2203–2218.
- Pantazopoulou, S. J., Papoulia, K. D. (2001). Modelling cover-cracking due to reinforced corrosion in RC structures. Journal of Engineering Mechanics, 127(4), 342–351.
- Krykowski, T. (2012). Modelling of concrete cover damage caused by reinforcement corrosion in reinforced concrete. Polish Academy of Sciences, Committee for Civil and Water Engineering, Warsaw, Studia z Zakresu Inżynierii 78 (in Polish).
- Molina, F. J., Alonso, C., Andrade, C. (1993). Cover cracking as a function of rebar corrosion: part 2 numerical model. Materials and Structures, 26(9), 532–548.
- Suwito, C., Xi, Y. (2008). The effect of chloride- induced steel corrosion on service life of reinforced concrete structures. Structure and Infrastructure Engineering: Maintenance, Management, Life-Cycle Design and Performance, 4(3), 177–192.
- Krykowski, T., Wieczorek, B. (2017). Application of damage mechanics rules to evaluate the growth of corrosive deformations in transition layer. Corrosion Protection, 1(60), 3–6.
- Zybura, A., Jaśniok, M., Jaśniok, T. (2011). Diagnostics of reinforced concrete structures. Testing of reinforcement corrosion and protective properties of concrete, t. II. Warsaw: Wydawnictwo Naukowe PWN (in Polish).
- López, W., González, J. A. (1993). Influence of the degree of pore saturation on the resistivity of concrete and the corrosion rate of steel reinforcement. Cement and Concrete Research, 23(2), 368–376.
- Krykowski, T., Zybura, A. (2013). Modelling of reinforced concrete element damage as a result of reinforcement corrosion. Procedia Engineering 57, 614–623.
Language: English
Page range: 107 - 113
Submitted on: Jun 25, 2017
Accepted on: Sep 14, 2017
Published on: Aug 28, 2018
Published by: Silesian University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Keywords:
Related subjects:
© 2018 Faustyn RECHA, Tomasz JAŚNIOK, Tomasz KRYKOWSKI, published by Silesian University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.