References
- 1. Orthodontic bracket US 48387886 A James F. Reher, Farrokh Farzin-Nia 1987.
- 2. Kusy R, Whitley J. Assessment of second-order clearances between orthodontic archwires and bracket slots via the critical contact angle for binding. Angle Orthod 1999;69(1):71-80. doi: 10.1043/0003-3219 (1999)069<0071:AOSOCB>2.3.CO;2.
- 3. Alavi S, Kachuie M. Assessment of the hardness of different orthodontic wires and brackets produced by metal injection molding and conventional methods. Dent Res J (Isfahan) 2017;14(4):282-7.
- 4. Floria G, Franchi L. Metal injection molding in orthodontics. Virtual J Orthod 1997;2:1. http://vjo.it/five/mim.htm (20.01.2019).
- 5. Kinkard C. Focus: medical plant tour: metal injection molding smiles. Injection Molding Magazine. http://www.immnet.com/articleprintable.html?article=1962 (20.02.2019).
- 6. Cash AC, Good SA, Curtis RV, McDonald F. An evaluation of slot size in orthodontic brackets – are standards as expected? Angle Orthod 2004;74(4):450-3. doi: 10.1043/0003-3219(2004)074<;0450:AEOSSI>2.0.CO;2.
- 7. Bhalla NB, Good SA. McDonald F, Sherriff M, Cash AC. Assessment of slot sizes in self-ligating brackets using electron microscopy. Aust Orthodox J 2010;26(1):38-41
- 8. Erduran RH, Maeda FA, Ortiz SR, Triviño T, Fuziy A, Carvalho PE. Analysis on the precision of the dimensions of self-ligating brackets. Microsc Res Tech 2016;79(12):1188-92. doi: 10.1002/jemt.22774.
- 9. Lee Y, Lee DY, Kim YR. Dimensional accuracy of ceramic self-ligating brackets and estimates of theoretical torsional play. Angle Orthod 2016;86(5):804-9. doi: 10.2319/092415-647.1.
- 10. Brown P, Wagner W, Choi H. Orthodontic bracket slot dimensions as measured from entire bracket series. Angle Orthod 2015;85(4):678-82. doi: 10.2319/042814-307.1.
- 11. Ancona MAL, Díaz RR, Rodríguez FM, Olvera SP. Variations in slot size of self-ligating brackets. Revista Mexicana de Ortodoncia 2015;3(4):224-7. doi: 10.1016/j.rmo.2016.03.058.
- 12. Pai VS, Pai SS, Krishna S, Swetha M. Evaluation of slot size in orthodontic brackets: Are standards as expected? J Indian Orthod Soc 2011;45(4):169-74.
- 13. Major TW, Carey JP, Nobes DS, Major PW. Orthodontic bracket manufacturing tolerances and dimensional differences between select self-ligating brackets. J Dent Biomech 2010;2010:781321. doi: 10.4061/2010/781321.
- 14. Alavi S, Tajmirriahi F. Assessment of dimensional accuracy of preadjusted metal injection molding orthodontic brackets. Dent Res J (Isfahan) 2016;13(5):440-5.
- 15. Meling TR, Odegaard J, Segner D. On bracket slot height: a methodologic study. Am J Orthod Dentofacial Orthop 1998;113(4):387-93.
- 16. Joch A, Pichelmayer M, Weiland F. Bracket slot and archwire dimensions: manufacturing precision and third order clearance. J Orthod 2010;37(4):241-9. doi: 10.1179/14653121043182.
- 17. Demling A, Dittmer MP, Schwestka-Polly R. Comparative analysis of slot dimension in lingual bracket system. Head Face Med 2009;5:27. doi: 10.1186/1746-160X-5-27.
- 18. Kapur-Wadhwa R. Physical and mechanical properties affecting torque control. J Clin Orthod 2004;38(6):335-40.
- 19. Arreghini A, Lombardo L, Mollica F, Siciliani G. Torque expression capacity of 0.018 and 0.022 bracket slots by changing archwire material and cross section. Prog Orthod 2014;15:53. doi: 10.1186/s40510-014-0053-x.
- 20. Bennett J. Fundamentals of orthodontic bracket selection. London: LeGrande Publishing; 2010.
- 21. Siatkowski RE. Loss of anterior torque control due to variations in bracket slot and archwire dimensions. J Clin Orthod 1999;33(9):508-10.
- 22. English JD, Briss BS, Jamieson SA, Kastropet MC, Castelein PT, Deleon E, et al. Common errors in preparing for and completing the American Board of Orthodontics clinical examination. Am J Orthod Dentofacial Orthop 2011;139(1):136-7. doi: 10.1016/j.ajodo.2010.11.005.