References
- AWS D1.4/D1.4M:2011 Structural Welding Code – Reinforcing Steel. Including Metal Inserts and Connections in Reinforced Concrete Construction.
- Bompa, D.V. & Elghazouli, A.Y. (2018) Monotonic and cyclic performance of threaded reinforcement splices. Structures, 16, 358-372.
- Bompa, D.V. & Elghazouli, A.Y. (2019) Inelastic cyclic behaviour of RC members incorporating threaded reinforcement couplers. Engineering Structures, 180, 468-483.
- Caprili, S., Salvatore, W. & Valentini, R. (2021) Micro and macro structural investigations on welded joints of composite truss steel concrete beams. Advances in Materials Science and Engineering, Article ID 6183178, 13 pages, DOI: 10.1155/2021/6183178.
- Dabiri, H. & Kheyroddin, A. (2021) An experimental comparison of RC beam-column joints incorporating different splice methods in the beam. Structures, 34, 1603-1613.
- Dabiri, H., Kheyroddin, A. & Dall’Asta, A. (2022) Splice methods used for reinforcement steel bars: A state-of-the-art review. Construction and Building Materials, 320, 126198.
- Gas Pressure Welding Machine Catalog (2023) Daia Corporation, Inuyama-City, https://www.daianet.co.jp/download.html (18.10.2023).
- Hua, L.J., Abd. Rahman, A.B. & Ibrahim, I.S. (2014) Feasibility study of grouted splice connector under tensile load. Construction and Building Materials, 50, 530-539.
- IS 456:2000 Plain and Reinforced Concrete – Code of Practice.
- IS 9417:2018 Welding of High Strength Steel Bars for Reinforced Concrete Construction – Recommendations.
- Issa C.A. & Nasr, A. (2006) An experimental study of welded splices of reinforcing bars. Building and Environment, 41, 1394-1405.
- Kheyroddin, A. & Dabiri, H. (2020) Cyclic performance of RC beam-column joints with mechanical or forging (GPW) splices; an experimental study. Structures, 28, 2562-2571.
- Kubicki, K. (2021) The analysis of the resistance of tee joint fillet welds according to Eurocode 3. Zeszyty Naukowe Politechniki Częstochowskiej, Budownictwo, 177, 106-111.
- Kubicki, K. (2022) The rational use of welds in steel structures. Construction of Optimized Energy Potential, 11, 85-92.
- Kubicki, K. & Wojsyk, K. (2022) Zasady bezpiecznego i ekonomicznego projektowania oraz wykonywania konstrukcji spawanych. Materiały Budowlane, 12, 22-25.
- Lienert, T., Siewert, T., Babu, S. & Acoff, V. (Eds.) (2011) ASM Handbook: Welding Fundamentals and Processes. vol. 6A, Materials Park, OH: ASM International.
- Lu, Z., Huang, J., Li, Y., Dai, S., Peng, Z., Liu, X. & Zhang, M. (2019) Mechanical behaviour of grouted sleeve splice under uniaxial tensile loading. Engineering Structures, 186, 421-435.
- Matteson, R. (2011) Flash Welding and Upset Welding. In: Lienert, T., Siewert, T., Babu, S., Acoff, V. (Eds.) (2011) ASM Handbook: Welding Fundamentals and Processes. vol. 6A, Materials Park, OH: ASM International, 448-455.
- Mazur, M., Ulewicz, R. & Bokůvka, O. (2014) The impact of welding wire on the mechanical properties of welded joints. Materials Engineering, 21, 122-128.
- Moustafa, T., Khalifa, W., El-Koussy, M.R. et al. (2016) Optimizing the welding parameters of reinforcing steel bars. Arab. J. Sci. Eng., 41, 1699-1711.
- PN-EN 1090-2:2018-09 Execution of steel structures and aluminium structures – Part 2: Technical requirements for steel structures.
- PN-EN ISO 17660-1:2008 Welding – Welding of reinforcing steel – Part 1: Load-bearing welded joints. PN-EN ISO 17660-2:2008 Welding – Welding of reinforcing steel – Part 2: Non load-bearing welded joints.
- PN-EN ISO 9692-1:2014-02 Welding and allied processes – Types of joint preparation – Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels.
- Radkovic, N., Lazic, V., Arsci, D., Nicolic, R. & Hadzima, B. (2017) Influence of welding time on quality of the friction welded joint of two dissimilar steels. Quality Production Improvement, 1(6), 1-11.
- Rebar Gas Pressure Welding Machine (2023) https://www.sinocrs.com/products/gas-pressure-welding-equipment/ (18.10.2023).
- Rodrigues, H., Furtadob, A., Arêdeb, A., Vila-Poucab, N. & Varumb, H. (2018) Experimental study of repaired RC columns subjected to uniaxial and biaxial horizontal loading and variable axial load with longitudinal reinforcement welded steel bars solutions. Engineering Structures, 155, 371-386.
- Singh, G. & Arora, N. (2013) Design and development of micro upset welding setup. International Journal Mechanical Engineering and Robotic Research, 2, 2, 51-58.
- Tazarv M., LaVoy, M., Sjurseth, T., Greeneway, E. & Wehbe, N. (2023) Analysis and design of mechanically spliced precast bridge columns. Engineering Structures, 280, 115726.
- Tazarv, M. & Saiidi, M.S. (2016) Seismic design of bridge columns incorporating mechanical bar splices in plastic hinge regions. Engineering Structures, 124, 507-520
- Wang, B.-X., Ding, R., Fan, J.-S., Cai, L.-J., Feng, Z.-M. & Wang, C.-K. (2022a) Shear performance of single steel-plate concrete composite beams with various transverse reinforcement configurations. Engineering Structures, 270, 114676.
- Wang, T., Zhou, Z., Yuan, K., Jiang, R., Ma, X. & Li, L. (2022b) Evaluation of common defects of grouted sleeve connectors. Case Studies in Construction Materials, 17, e01605.
- Zheng, Y., Xie, M., Liu, Z., Zhang, Y. & Ding, X. (2023) Performance of high strength steel bar splice with novel grouted deformed sleeve under tensile load. Construction and Building Materials, 403, 133092.
- Zhou, J., Stümpel, M., Kang, Ch. & Marx, S. (2022) Lap-spliced connections of steel and FRP bars in reinforced flexure concrete structures. Engineering Structures, 263, 114409.