References
- Balaha, M.M., Badawy, A.A.M. & Hashish, M. (2007) Effect of using ground tire rubber as fine aggregate on the behaviour of concrete mixes. Indian Journal of Engineering and Materials Sciences, 14, 427-435.
- Deviprasad Varma, P.R., Sreejith, P.S. & George, K.E. (2010) Studies on the fracture behaviour of polymer blends with special reference to PP/HDPE and PS/HIPS blends. Cochin University of Science & Technology.
- Elgharbawy, A.S. & Ali, R.M. (2022) A comprehensive review of the polyolefin composites and their properties. Heliyon, 8, 09932.
- Enfedaque, A., Alberti, M.G., Gálvez, J.C., Rivera M. & Simón-Talero, J.M. (2018) Can polyolefin fibre reinforced concrete improve the sustainability of a flyover bridge? Sustainability, 10, 4583.
- Eqra, R. & Moghim, M.H. (2016) Effect of strain rate on the fracture behaviour of epoxy-graphene nanocomposite. Bulletin of Materials Science, 39, 5, DOI: 10.1007/s12034-016-1257-0.
- Gesoglu M., Güneyisi E., Hansu O., Etli S. & Alhassan M. (2017) Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder. Construction and Building Materials, 140, 562-569.
- Helbrych, P. (2019) Recycling of sulfur polymers derived from the purification process of copper and other non-ferrous metals in concrete composites. Construction of Optimized Energy Potential, 8, 1, 131-136, DOI: 10.17512/bozpe.2019.1.14.
- Jacob, G.C., Starbuck, J.M., Fellers, J.F., Simunovic, S. & Boeman, R.G. (2004) Strain rate effects on the mechanical properties of polymer composite materials. Journal of Applied Polymer Science, 94, 1, 296-301, DOI: 10.1002/app.20901.
- Jaques, N.G., Silva, I.D., da Cruz Barbosa Neto, M., Ries, A., Canedo, E.L. & Wellen, R.M. (2018) Effect of heat cycling on melting and crystallization of PHB/TiO2 compounds. Polimeros, 28(2), 161-168, DOI: 10.1590/0104-1428.12416.
- Islam, J. Md., Meherier, S. Md. & Rakinul Islam, A.K.M., (2016) Effects of waste PET as coarse aggregate on the fresh and harden properties of concrete. Construction and Building Materials, 125, 946-951.
- Kantesh Balani, R.N., Verma, V. & Agarwal A. (2015) Physical Thermal and Mechanical Properties of Polymers, in Biosurfaces: A Materials Science and Engineering Perspective. First Edit. John Wiley & Sons, 329, 329-344.
- Khaloo, Ali R., Dehestani, M. & Rahmatabadi, P. (2008) Mechanical properties of concrete containing a high volume of tire-rubber particles. Waste Manage., 28, 2472-2482.
- Lamri, A., Shirinbayan, M., Pereira, M., Truffault, L., Fitoussi, J., Lamouri, S., Bakir, F. & Tcharkhtchi, A. (2020) Effects of strain rate and temperature on the mechanical behavior of high-density polyethylene. Journal of Applied Polymer Science, 137, 23, 1-11, DOI: 10.1002/app.48778.
- Le, H.B., Bui, Q.B. & Tang, L. (2021) Geopolymer recycled aggregate concrete: From experiments to empirical models. Materials, 14, 5, 1180, DOI: 10.3390/ma14051180.
- Pietrzak, A. (2018) Assesment of the impact of recycling from PET bottles in selected concrete properties. Construction of Optimized Energy Potential, 7, 1, 51-56, DOI: 10.17512/bozpe.2018.1.07.
- Pietrzak, A. & Ulewicz, M. (2023) Influence of post-consumer waste thermoplastic elastomers obtained from used car floor mats on concrete properties. Materials, 16(6), 2231, DOI: 10.3390/ma16062231.
- Plöckl, M. (2019) Effect of Strain Rate on the Tensile, Compressive, and Shear Response of Carbon-Fiber-Reinforced Thermoplastic Composites. Technische Universität München [Online]. Available: www.lcc.mw.tum.de
- Rahman, M. & Islam, A. (2012) Recycled polymer materials as aggregates for concrete and blocks. Journal of Chemical Engineering, 27, 1, 53-57, DOI: 10.3329/jce.v27i1.15859.
- Richeton, J., Ahzi, S., Vecchio, K.S., Jiang, F.C. & Adharapurapu, R.R. (2006) Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress. International Journal of Solids and Structures, 43, 7-8, 2318-2335.
- Qiu, K., Chen, S., Wang, C., Yang, B. & Jiang, J. (2023) Optimal design of multi-scale fibre-reinforced cement-matrix composites based on an orthogonal experimental design. Polymers, 15, 13, 2898, DOI: 10.3390/polym15132898.
- Salih, S.E. (2018) Mechanical Behavior of Polymers in Mechanical Behavior of Materials. University of Technology, 339-362.
- Sepe, M. (2016) Understanding strain-rate sensitivity in polymers. Plastics Technology, 62, 8, 26-29.
- Spaeth, V. & Djerbi Tegguer, A. (2013) Improvement of recycled concrete aggregate properties by polymer treatments. International Journal of Sustainable Built Environment, 2, 143-152.
- Wellen, R.M.R., Canedo, E.L. & Rabello, M.S. (2015) Melting and crystallization of poly(3-hydroxy-butyrate)/carbon black compounds. Effect of heating and cooling cycles on phase transition. Journal of Materials Research, 30, 21, 3211-3226, DOI: 10.1557/jmr.2015.287.
- Yang, W., Liu, F., Hongxiang, C. & Dai, X. (2020) Influence of heating rate on the structure and mechanical properties of aromatic BPDA-PDA polyimide fiber. Polymers 12, 3, 510, DOI: 10.3390/polym12030510.
- Zych, T. & Krasodomski, W. (2016) Polyolefin fibres used in cementitious composites – manufacturing, properties and application. Czasopismo Techniczne. Budownictwo, 113, 3, 155-178.