References
- Barberousse, H., Brayner, R., Do Rego, M., Castaing, J., Beurdeley-Saudou, P. & Colombet, J. (2007) Adhesion of facade coating colonisers, as mediated by physico-chemical properties. Biofouling, 23, 15-24.
- Barberousse, H., Ruota, B., Yepremianb, C. & Boulonc, G. (2007) An assessment of facade coatings against colonisation by aerial algae and cyanobacteria. Building and Environment, 42, 2555-2561.
- Barreira, E. & Freitas, V.P. (2014) External thermal insulation composite systems: critical parameters for Surface Hygrothermal Behaviour. Advances in Materials Science and Engineering, 1-16.
- Becker, R. (2003) Patterned staining of rendered facades: hygrothermal analysis as a means for diagnosis. Thermal Envelope and Building Science, 26, 321-341.
- Duarte, C. (2011) The Europe of mortars and ETICS. Trends, perspectives and opportunities, IX SBTA – Brazilian Symposium on Mortars Technology, Belo Horizonte, Brazil, 18 May 2011, 7-16.
- Dylla, A. (2009) Praktyczna fizyka cieplna budowli. Szkoła projektowania złączy budowlanych. Bydgoszcz: Wydawnictwo Uniwersytetu Technologiczno-Przyrodniczego w Bydgoszczy.
- Fiorkowicz-Pogorzelska, K. (2001) Metodyka określania wartości obliczeniowej współczynnika przewodzenia ciepła materiałów budowlanych. Building Research Institute – Quarterly, 3, 33-53.
- Krus, M., Rosler, D. & Sedlbauer, K. (2006) New model for the hygrothermal calculation of condensate on the external building surface. Proceedings of the 3rd International Building Physics Conference – Research in Building Physics and Building Engineering, 329-333.
- Ksit, B. & Horbik, D. (2015) Zanieczyszczenia biologiczne elewacji. Builder, 4, 80-83.
- Parracha, J., Borsoi, G., Flores-Colen, I., Veiga, R., Nunes, L., Dionisio, A., Gomes, M. & Faria, P. (2021) Performance parameters of ETICS: Correlating water resistance, bio-susceptibility and surface properties. Construction and Building Materials, 272, 121956-121970.
- PN-EN ISO 10456:2009 Materiały i wyroby budowlane -Właściwości cieplno-wilgotnościowe -Tabelaryczne wartości obliczeniowe i procedury określania deklarowanych i obliczeniowych wartości cieplnych.
- Sedlbauer, K., Krus, M. (2002) Mold growth on ETICS (EIFS) as a result of bad workmanship. Thermal Envelope and Building Science, 26, 117-121.
- Venzmer, H., Von Werder, J., Lesnych, N. & Koss Krus, L. (2008) Algal defacement of facade materials – results of long term natural weathering tests obtained by new diagnostic tools. 8th Symposium on Building Physics in the Nordic Countries. Copenhagen, Denmark, 277-284.