References
- [1]. Jain S., Chellapandian M., Prakash S. S. (2017). Emergency repair of severely damaged reinforced concrete column elements under axial compression: An experimental study, Construction and Building Materials, 155 751–761.10.1016/j.conbuildmat.2017.08.127
- [2]. P. Azarsa, R. Gupta. (2018). Specimen preparation for nano-scale investigation of cementitious repair material, Construction and Building Materials, Micron, 107 43–54.10.1016/j.micron.2018.01.007
- [3]. A. Irene Ortega, Teresa M. Pellicer, Jose M. Adam, Pedro A. Calderón. (2018). An experimental study on RC columns repaired on all four sides with cementitious mortars, Construction and Building Materials, 161 53–62.10.1016/j.conbuildmat.2017.11.126
- [4]. M. Elghazy, A. El Refai, U. Ebead, A. Nanni. (2018). Post-repair flexural performance of corrosion-damaged beams rehabilitated with fabric-reinforced cementitious matrix (FRCM), Construction and Building Materials 166 732–74410.1016/j.conbuildmat.2018.01.128
- [5]. American Concrete Institute (ACI). (1995), Building Code Requirements for Reinforced Concrete. Detroit, MI.
- [6]. J. Castro and A. E. Naaman, (1981) Cement Mortar Reinforced with Natural Fibers, ACI Journal, January
- [7]. Saadatmanesh, H. & Ehsani, M.R. (1990). Fiber Composite Plates Can Strengthen Beams, Concrete International, March, pp. 65-7 1.
- [8]. Meir, U. and Kaiser, H. (1991). Strengthening Structures with CFRP Laminate, Proceedings of Advanced Composite Materials in Civil Engineering; Structures, ASCE, Las /Vegas, Nevada, pp. 224-232.
- [9]. Ross, C.A., Jerome, D.M. and Hughes, M.L. (1994). Hardening and Rehabilitation of Concrete Structures Using Carbon Fiber Reinforced Plastics (CFRPL Final Report, Wright Laboratory Armament Directorate) Eglin Air Force Base, Florida.
- [10]. Ritchie, P.A. (1988). External Reinforcement of Concrete Beams Using Fiber Reinforced Plastic, Thesis, Leigh University.
- [11]. Ghaleb, B.M. (1992). Strengthening of Damaged Reinforced Concrete Beams bv External Fiber Glass Plates, Thesis, King Fahd University of Petroleum and Minerals, Saudi Arabia.
- [12]. PCI committee on glass fiber reinforced concrete panels. (1981). Recommended practice for glass fiber reinforced concrete panels. PCI J., 26(1):25-93.
- [13]. Gonilho-Pereira C., Faria P., Fangueiro R., Vinagre P., Martins A., (2011). Cement based fiber-reinforced mortar: the fiber influence on the mortar performance, 6th Congresso Luso-Moçambicano de Engenharia CLME’2011, Maputo, 29 August - 2 September.
- [14]. Puertas, F., Amat, T., Fernandez-Jimenez A., and Vazquez, T., (2003). Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres, Cement and Concrete Research 33 pp. 2031–2036.
- [15]. Toledo, R.D., and Sanjuan, M.A., (1999). Effect of low modulus sisal and polypropylene fibers on the free and restrained shrinkage of mortars at early age, Cem. Concr Res 29 pp. 1597–1604.
- [16]. ACI 544.1R-96, (1996) State-of-the-art report on fiber rein-forced concrete, Farmington Hills, Michigan: American Concrete Institute
- [17]. Aydin, A.C.(2007). Self compactability of high volume hybrid fiber reinforced concrete. Const. Build. Material;21, 1149-1154.10.1016/j.conbuildmat.2006.11.017
- [18]. Shah, S. P. and Naaman, A. E. (1976). Mechanical properties of glass and steel fiber reinforced mortar. ACI Journal; 73(1), 50-53.
- [19]. Nataraja, M. C, Dhang, N. & Gupta, A. P. (1999). Stress-strain curves for steel fiber reinforced concrete under compression. Cement & Concrete Composite; 21, 383-390.10.1016/S0958-9465(99)00021-9
- [20]. Okamura, H. & Ouchi, M. (2003). Self-compacting concrete. J. Adv. Concr Technol,1(1), 1-15.10.3151/jact.1.5
- [21]. Gang, L. Wang, K &, Rudolphi, T.J. (2008). Modeling reheological behavior of highly flowable mortar using concepts of particle and fluid mechanics. Cem. & Conc. Comp. 30, 1-12.10.1016/j.cemconcomp.2007.06.002
- [22]. Domene, P. L. & Jine, J. (1999). Properties of mortar for self-compacting concrete. Proceedings of the 1st international RILEM symposium on self-compacting concrete, 109-20.
- [23]. Khayat, KH, Morin, R. (2002). Performance of self-consolidating concrete used to repair parapet wall in Montreal. Proceedings of the first North American conference on the design and use of self-consolidating concrete, 475-481.
- [24]. Zhou, F. P., Barr, B. I. G. & Lydon, F. D. (1994) Fracture mechanical properties of high strength concrete with varying silica fume content and aggregates. Cement &Concrete Research, 25(3), 543-52.
- [25]. Carlach D., Hemery Y. (2002). Etude prospective sur le collage en France, Digitp/Simap, décembre, 237 pages http://www.industrie.gouv.fr/pdf/collage.pdf
- [26]. A. Finley. (1999). Notice technique, Les résines époxydes EPONAL (sols industriels, étanchéité, réparations, collages), éditions mars.
- [27]. Bardonnet P. (1992). Résines époxydes: composants et propriétés. Techniques de l’ingénieur, traité de Plastique et Composites,10.51257/a-v1-a3465
- [28]. Mays G., Hutchinson A.R. (1992). Adhesives in Civil Engineering, Cambridge University Press. Cambridge (UK),.
- [29]. Toutanji H., Ortiz G. (2001). The effect of surface preparation on the bond interface between FRP sheets and concrete members, Composite Structures (53), 457-462.10.1016/S0263-8223(01)00057-5
- [30]. Maugis D., Barquins M. (1986). Adhésion, collage et mécanique de la rupture, Colloque RILEM Adhesion between polymers and concrete – bonding, protection, repair, 16-19 Septembre Aix en Provence, 41-54.10.1007/978-1-4899-3454-3_5
- [31]. Pang M., Yang S., Zhang Y.. (2011). Experimental study of cement mortar-steel fiber reinforced rammed earth wall, International Symposium on Innovation & Sustainability of Structures in Civil Engineering, Xiamen University, China.10.3390/su4102630
- [32]. Mc. N. Shaw I. (1989). Interactions between organic polymers and cement hydration products,, PhD thesis of Birmingham University.
- [33]. Neves M.I., Chabut M., Perruchot C., Chehimi M.M., Benzarti K. (2004). Interfacial interactions of structural adhesive components with cement pastes: studies by inverse gas chromatography (IGC), Journal of Applied Surface Science (238),523-529..10.1016/j.apsusc.2004.05.245
- [34]. Majumdar, A. J. (1975) Properties of fibre cement composites, Fibre Reinforced Cement and Concrete, RILEM Symposium, 279-313.
- [35]. Larner, L. J., Speakman, K. and Majumdar, A. J. (1976), Chemical interaction between glass-fibres and cement, J. of Non-Crystalline Solids, 20, 43-74.10.1016/0022-3093(76)90107-1
- [36]. Bijen, J. (1983). Durability of some glass fiber reinforced cement composites. ACI journal, July-August 305-311.
- [37]. Leonard, S. and Bentur, A. (1984) Improvement of the durability of glass fiber reinforced cement using blended cement matrix. Cement and concrete research 14:717-728.10.1016/0008-8846(84)90035-8
- [38]. Bentur, A. (1986). Aging process of glass fibre reinforced cements with different cementitious matrices. RILEM symposium FRC 86, vol. 2, paper 7.3.
- [39]. Shah, S.P., Ludirdja, D., Daniel, J.I., Mobasher, B. (1988). Toughness-durability of glass fiber reinforced concrete systems. ACI materials journal, September-October 352-360.
- [40]. Li, Z. and Mobasher, B. & Shah, S.P. (1991). Evaluation of interfacial properties in fiber reinforced cementitious composites. Fracture processe in concrete, rock and ceramics, J.G.M. Van Mier, J.G. Rots, A. Bakker, RILEM, E. an F.N. Spon. Pp. 317-326,