References
- [1] Ministry of Infrastructures (2012. Basic Housing Construction Instructions for Protection against Natural and Manmade Disasters in Rural Areas, Rwanda Housing Authority, Kigali, Rwanda
- [2] Ministry of Natural Resources (2017). Rwanda National Land Use Planning Guidelines, Kigali, Rwanda
- [3] Ministry of Infrastructures (2015). Rwanda Building Code, 1st edition. Kigali, Rwanda
- [4] Jwo-Hua Chen (2012). A Study on the Selection of Optimal Roof Type for Low-rise buildings group in a View of Wind Pressures Action. International Conference on Advances in Computational Modeling and Simulation. Procedia Engineering, 31, 1149 – 1154. DOI:10.1016/j.proeng.2012.01.115510.1016/j.proeng.2012.01.1155
- [5] Siti Halipah Ibrahim,S.H., Roslan, Q., Affandi, R., Razali, A.W., Samat,Y.S., Nawi Mohd N.M.(2018). Study On The Optimum Roof Type With 30° Roof Angle To Enhance Natural Ventilation And Air Circulation Of A Passive Design, International Journal of Technology, 8, 1692-1701. DOI: https://doi.org/10.14716/ijtech.v9i8.275910.14716/ijtech.v9i8.2759
- [6] Shen, S. W. A. Z.(2012). Effects of Roof Pitch on Air Flow and Heating Load of Sealed and Vented Attics for Gable-Roof Residential Building. Sustainability, 4, 1999-2021.10.3390/su4091999
- [7] Guyer, J.P. (2009). Introduction to Roofing Systems, Continuing Education and Development, Inc. 9. Greyridge Farm Court Stony Point, NY 10980
- [8] Stramit Corporation Pty limited (2017). Stramit-Roof-Slope. Design-Guide
- [9] Ulubeylia, S., Kazazb, A., Er, B., Birgonul M.T. (2014). Comparison of Different Roof Types in Housing Projects in Turkey: Cost Analysis. Procedia - Social and Behavioral Sciences, 119, 20 – 29.10.1016/j.sbspro.2014.03.005
- [10] Radziszewska-Zielina, E.(2014). A comparative analysis of selected parameters of roofing used in the Polish construction industry. SSP - Journal of Civil Engineering, 9(1), 41-50. DOI: 10.2478/sspjce-2014-000510.2478/sspjce-2014-0005
- [11] Melo V. T., Renato L. F., Adhemar P. M., Marcos E. B., Diego A. M.(2014). Evaluation of roof slope and exposure with different roofing materials in reduced models of animal production facilities in spring and summer. Eng. Agríc., Jaboticabal, 34(6), 1030-1038.10.1590/S0100-69162014000600001
- [12] Ghaedi, A., Ghaedi, H., Ghaedi, H.(2012) The role of roof shapes in design of green building, systems (case study: Iran, Bandar Abbas). ICESD 2012, 5-7. DOI: 10.1016/j.apcbee.2012.03.05510.1016/j.apcbee.2012.03.055
- [13] Mavridou, T., Doulos, L.T. (2017). Evaluation of Different Roof Types Concerning Daylight in Industrial Buildings during the Initial Design Phase: Methodology and Case Study. Buildings, 9 (7). DOI: 10.3390/buildings9070170.10.3390/buildings9070170
- [14] Singh, J., Roy, A.K.(2019). Effects of roof slope and wind direction on wind pressure distribution on the roof of a square plan pyramidal low-rise building using CFD simulation. International Journal of Advanced Structural Engineering. https://doi.org/10.1007/s40091-019-0227-310.1007/s40091-019-0227-3
- [15] Morgado, J., Flores-Colen, I., De Brito, J., Silva, A. (2017). Maintenance Planning of Pitched Roofs in Current Buildings. Journal of Construction Engineering and Management, 143 (7). doi: 10.1061/(ASCE)CO.1943-7862.000131610.1061/(ASCE)CO.1943-7862.0001316
- [16] Syazili, F., (2005). Chapter 8 roof lecturer notes. Universiti Teknologi Malaysia
- [17] Mbereyaho Leopold, Abaho G. Gershome, Mutabaruka Jean de Dieu, Ndayisenga Jean Claude, Niyomwungeri Evariste, and Nsabimana Jacques (2019). Investigation on Application of Rwanda Building Standards in Local Construction Industry. Rwanda Journal of Engineering, Science, Technology and Environment, Volume 2(I),1-17. https://dx.doi.org/10.4314/rjeste.v2i1.310.4314/rjeste.v2i1.3