References
- [1] Frigione, M. (2015). If the buildings were made of bottles... Edorium Journal of Waste Management, 1, 20-22. DOI: 10.5348/W01-2015-4-ED-4.10.5348/W01-2015-4-ED-4
- [2] Elliot, J.A. (2006). An introduction to sustainable development (3rd ed.). Oxford, UK: Routledge.
- [3] UNEP Global Environmental Alert Service (2014). Sand, rarer than one thinks. Retrieved July 3, 2017, from: https://europa.eu/capacity4dev/unep/document/unep-global-environmental-alert-service-geas-sand-rarer-one-thinks
- [4] Shetty, M.S. (2012). Concrete technology: Theory and practice (6th revised ed.). New Delhi, India: S. Chand.
- [5] Akinboboye, F.A.O., Adegbesan, O.O., Ayegbusi, O.A. & Oderinde, S.A. (2015). Comparison of the compressive strength of concrete produced using sand from different sources. International Journal of Academic Research in Environment and Geography, 2(1), 6-16. DOI: 10.6007/IJAREG/v2-i1/1792.10.6007/IJAREG/v2-i1/1792
- [6] Rajapaksha, R.W.C.N. & Sooriyaarachchi, H.P. (2009). Feasibility of quarry dust to replace river sand as fine aggregate of concrete. Engineer: Journal of the Institution of Engineers, Sri Lanka, 42(4), 30-37. DOI: 10.4038/engineer.v42i4.7031.10.4038/engineer.v42i4.7031
- [7] Söderholm, P. (2011). Taxing virgin natural resources: Lessons from aggregates taxation in Europe. Resources, Conservation and Recycling, 55(11), 911-922. DOI: 10.1016/j.resconrec.2011.05.011.10.1016/j.resconrec.2011.05.011
- [8] Bahn-Walkowiak, B., Bleischwitz, R., Distelkamp, M. & Meyer, M. (2012). Taxing construction minerals: a contribution to a resource-efficient Europe. Mineral Economics, 25(1), 29-43. DOI: 10.1007/s13563-012-0018-9.10.1007/s13563-012-0018-9
- [9] Anya, C.U. & Osadebe, N.N. (2015). Effect of partial replacement of sand with quarry dust on the structural characteristics of sandcrete blocks. Nigerian Journal of Technology, 34(4), 679-684. DOI: 10.4314/njt.v34i4.3.10.4314/njt.v34i4.3
- [10] Agbede, O.I. & Joel, M. (2004). Suitability of quarry dust as partial replacement for sand in hollow block production. Nigerian Journal of Engineering Research Development, 3(4), 33-37.
- [11] Joel, M. (2010). Use of crushed granite fine as replacement to river sand in concrete production. Leonardo Electronic Journal of Practices and Technologies, 17, 85-96.
- [12] Nagabhushana & bai, H.S. (2011). Use of crushed rock powder as replacement of fine aggregate in mortar and concrete. Indian Journal of Science and Technology, 4(8), 917-922. DOI: 10.17485/ijst/2011/v4i8/30896.
- [13] Balamurugan, G. & Perumal, P. (2013). Behaviour of concrete on the use of quarry dust to replace sand – An experimental study. IRACST – Engineering Science and Technology: An International Journal, 3(6), 776-781.
- [14] Manguriu, G.N., Karugu, C.K., Oyawa, W.O., Abuodha, S.O. & Mulu, P.U. (2013). Partial replacement of natural river sand with crushed rock sand in concrete production. Global Engineers & Technologists Review, 3(4), 7-14.
- [15] Rajput, V.S., Pandey, S., Jain, D. & Saxena, A.K. (2014). Use of quarry fine as partial replacement of concrete as a replacement of fine aggregate in concrete (evaluation of workability and compressive strength). International Journal for Scientific Research & Development, 2(7), 161-164.
- [16] Prakash, K.S. & Rao, C.H. (2016). Study on compressive strength of quarry dust as fine aggregate in concrete. Advances in Civil Engineering, Article ID 1742769, 5 pp. DOI:10.1155/2016/1742769.
- [17] Ilangovana, R., Mahendrana, N. & Nagamanib, K. (2008). Strength and durability properties of concrete containing quarry rock dust as fine aggregate. ARPN Journal of Engineering and Applied Sciences, 3(5), 20-26.
- [18] Chijioke, C., Igwegbe, W., Ibearugbulem, O., Okoye, P. & Oke, M. (2014). Comparing the compressive strengths of concrete made with river sand and quarry dust as fine aggregates. International Letters of Natural Sciences, 20, 179-189. DOI:10.18052/www.scipress.com/ILNS.20.179.
- [19] Sivakumar, A. & Prakash, M. (2011). Characteristic studies on the mechanical properties of quarry dust addition in conventional concrete. Journal of Civil Engineering and Construction Technology, 2(10), 218-235.
- [20] Standards Organisation of Nigeria. (2003). Quality standard for ordinary Portland cement – Part 1: Composition, specification and conformity criteria for common cements. NIS 444-1. Lagos.
- [21] Asiedu, R.O. (2016). Using lateritic gravel as all-in aggregate for concrete production. Journal of Engineering, Design and Technology, 15(3), 305-316. DOI 10.1108/JEDT-01-2016-0001.10.1108/JEDT-01-2016-0001
- [22] British Standards Institution. (1983). Testing concrete – Part 102: Method for determination of slump. BS 1881-102. London.
- [23] British Standards Institution. (1983). Testing concrete – Part 114: Methods for determination of density of hardened concrete. BS 1881-114. London.
- [24] British Standards Institution (1983). Testing concrete – Part 116: Method for determination of compressive strength of concrete cubes. BS 1881-116. London.
- [25] McKinlay, D.G. (1996). Soils. In N. Jackson & R.K. Dhir (Eds.), Civil engineering materials (5th ed.) (pp. 349-447). Basingstoke, UK: Palgrave.
- [26] Standards Organisation of Nigeria. (2004). Standards for sandcrete block. NIS 87. Lagos.
- [27] Neville, A.M. & Brooks, J.J. (2010). Concrete technology (2nd ed.). Essex, UK: Pearson Education.
- [28] Eziefula, U.G., Opara, H.E. & Anya, C.U. (2017). Mechanical properties of palm kernel shell concrete in comparison with periwinkle shell concrete. Malaysian Journal of Civil Engineering, 29(1), 1-14.
- [29] American Concrete Institute. (1999). Aggregates for concrete. ACI Education Bulletin E1-99.
- [30] British Standards Institution. (1992). Specification for aggregates from natural sources for concrete. BS 882. London.
- [31] Dhir, R.K. & Jackson, N. (1996). Concrete. In N. Jackson & R.K. Dhir (Eds.). Civil engineering materials (5th ed.) (pp. 161-298). Basingstoke, UK: Palgrave.
- [32] British Standards Institution. (1997). Structural use of concrete – Part 1: Code of practice for design and construction. BS 8110-1. London.