References
- [1] Czarnecki, L., Nanotechnologia w budownictwie. Przegląd budowlany, 2011, no 1, p.40-53.
- [2] Sobolev, K., Ferrara, M. How nanotechnology can change the concrete word-Part 1. American Ceramic Bulletin, vol. 84, 2005, no10, p. 15-17.
- [3] Sobolev, K., Ferrara, M. How nanotechnology can change the concrete word-Part 2. American Ceramic Bulletin, vol. 84, 2005, no 11, p. 16-20.
- [4] Łukowski, P. Modyfikacja materiałowa betonu. Kraków: Polski cement, Stowarzyszenie Producentów Cementu, 2016.
- [5] Kamal, M., Safan, M., Eltabey, M., Zaki El. S., Abu El-hassan. Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite. International Journal of Nano Dimension, vol. 3, 2012, p. 91-100.
- [6] Li, H., Xiao, H., Yuan, J. and Ou, J. Microstructure of cement mortar with nano-particles. Composite Building Engineering, vol. 35, 2004, p. 185-159.
- [7] Yu, R., Spiesz, P., Brouwers, H. Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Construction and Building Materials, vol. 65, 2014, p. 140-150.
- [8] Senff, L., Hotza, D., Lucas, S., Ferreira, V., Labrincha, J. Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars. Material Science and Engineering, vol. 532, 2012, p. 354-361.
- [9] Anyszka, R., Bieliński, D., Dobrowolski, O. Wpływ modyfikacji powierzchni napełniaczy mineralnych na właściwości kompozytów silikonowych. Inżynieria Materiałowa, 2011, no 4, p.301-305.
- [10] Raki, L., Beaudoin, J., Alizadeh, R., Makar, J., Sato T. Cement and Concrete Nanoscience and Nanotechnology. Materials 2010, no 3, p. 918-942.
- [11] Kotsay, G. Effect of synthetic nanodispersed silica on the properties of Portland cement based mortars. Chemistry & Chemical Technology, Vol. 7, No. 3, 2013, p. 335-338.
- [12] PN-EN 196-3:2016-12: Cement testing methods - Part 3: Determination of bonding times and volume constant.
- [13] EN 196-1:2016-07 Cement testing methods - Part 1: Determination of strength.