References
- [1] ISO Standards. (2007). Building components and building elements - Thermal resistance and thermal transmittance - Calculation method. ISO6946:2007. Geneva (Switzerland).
- [2] ISO Standard. (2014). Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method. ISO9869-1:2014. Geneva (Switzerland).
- [3] Feuermann, D. (1989). Measurement of envelope thermal transmittances in multifamily buildings. Energy and Buildings, 13(2), 139-148. doi:10.1016/0378-7788(89)90005-4.
- [4] Mumaw, J.R. (1974). Calibrated Hot box: An effective means for measuring thermal conductance in large wall sections. In R.P. Tye (Eds.), Heat transmission measurements in thermal insulations (pp. 193-211). Philadelphia: ASTM.
- [5] Mumaw J.R., (1980). Thermal research facility - A large calibrated hot box for horizontal building elements. In D.L. McElroy, R.P. Tye (Eds). Thermal insulation performance (pp. 195-207). West Conshohocken, PA: ASTM.
- [6] Asdrubali, F., D’Alessandro, F. & Baldinelli G. (2014). Evaluating in situ thermal transmittance of green buildings masonries - A case study. Case studies in Construction Materials 1, 53-59. doi:10.1016/j.cscm.2014.04.004.
- [7] Ahmad, A., Maslehuddin, M. & Al-Hadhrami, L.M., (2014). In situ measurement of thermal transmittance and thermal resistance of hollow reinforced precast concrete walls. Energy and Buildings 84, 132-141. doi:10.1016/j.enbuild.2014.07.048.
- [8] Peng, C. & Wu, Z. (2008). In situ measuring and evaluating the thermal resistance of building construction. Energy and Buildings 40(11), 2076-2082. doi:10.1016/j.enbuild.2008.05.012.
- [9] Trethowen, H. (1986). Measurement errors with surface-mounted heat flux sensor. Building and Environment 21(1), 41-56. doi:10.1016/0360-1323(86)90007-7.
- [10] American Society for Testing and Materials. (2000). Standard test method for steadystate heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus. ASTMC 177-97. West Conshohocken, PA.
- [11] American Society for Testing and Materials. (2001). Standard test method for steadystate thermal performance of building assemblies by means of a guarded hot box. ASTM C236-89. West Conshohocken, PA.
- [12] Desogus, G., Mura, S. & Ricciu, R. (2011). Comparing different approaches to in situ measurement of building components thermal resistance. Energy and Buildings 43(10), 2613 - 2620. doi:10.1016/j.enbuild.2011.05.025.
- [13] Meng, X., Yan, B., Gao, Y., Wang, J., Zhang, W. & Long, E. (2015). Factors affecting the in situ measurement accuracy of the wall heat transfer coefficient using the heat flow meter method. Energy and Buildings 86, 754-765. doi:10.1016/j.enbuild.2014.11.005.
- [14] ISO Standard. (1983). Thermal insulation - Qualitative detection of thermal irregularities in building envelopes - Infrared method. ISO 6781:1983. Geneva (Switzerland).
- [15] ISO Standard (1991). Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus. ISO 8301:1991. Geneva (Switzerland).
- [16] Peel, M.C., Finlayson, B.L. & McMahon, T.A. (2007). Updated world map of the Köppen-Geiger climate classification. Hydrol. Earth Syst. Sci. 11(5), 1633-1644. doi:10.5194/hess-11-1633-2007.
- [17] ENEA Climate Archive. (2016). Average recorded temperature and relative humidity in Bari. Retrieved June 12, 2016 from http://clisun.casaccia.enea.it/Profili/tabelle/548%20%5BBari%5D%20capoluogo.Txt.