Verification of the thermal insulation properties and determination the optimal position of the reflective thermal insulation layer in the wood based envelope

Martin Labovský; Martin Lopušniak

doi:10.1515/sspjce-2016-0006

.blurhash-client-img { display: none !important; }

Verification of the thermal insulation properties and determination the optimal position of the reflective thermal insulation layer in the wood based envelope

Selected Scientific Papers - Journal of Civil Engineering

Volume 11 (2016): Issue 1 (June 2016)

By: Martin Labovský and Martin Lopušniak

Open Access

|Jul 2016

Abstract

To achieve thinner wood based envelope is necessary look for an alternative thermal insulation material, which will have the best possible thermal insulation properties while maintaining affordability. One such material is also reflective thermal insulation layer, but it is necessary to verify the thermal insulation properties and determine the optimal position in the wood based envelope.

References

[1] Puškár, A. (2002). Obvodové pláště budov - fasády. Bratislava: Jaga. ISBN 80-889-0572-9.
Search in Google Scholar Back to article
[2] Kolb, J. (2008). Dřevostavby: systémy nosných konstrukcí, obvodové pláště. Praha: Grada. ISBN 978-80-247-2275-7.
Search in Google Scholar Back to article
[3] Janssens, A., Roels, S. & Vandaele, L. (2011). Full scale test facilities for evaluation of energy and hygrothermal performances. University Press. Zelzate.
Search in Google Scholar Back to article
[4] Chmúrny, I.(2003). Tepelná ochrana budov. Bratislava: Jaga group. ISBN 80-889-0527-3,
Search in Google Scholar Back to article
[5] Halahyja, M. et al (1985). Stavebná tepelná technika, akustika a osvetlenie. Alfa.
Search in Google Scholar Back to article
[6] STN EN 730540 (2012). Tepelnotechnické vlastnosti stavebných konštrukcií a budov. Tepelná ochrana budov.
Search in Google Scholar Back to article
[7] Kneer, R. (2005). Calculations of thermal transmission by radiation with the use of “Aluthermo Quattro” composite insulation mat: Expert Report commissioned by Aluthermo AG, Burg Reuland, Belgium. Aachen.
Search in Google Scholar Back to article
[8] Baláž, R. & Bagoňa, M. (2014). Preparation Measurements and Assessment of Roof Systems, SSP - Journal of Civil Engineering, 9(2), 27-38. - ISSN 1336-9024.10.2478/sspjce-2014-0013
Search in Google Scholar Back to article
[9] Kováč, M. (2015). Comparison of vertical light wooden constructions insulated by straw bales. 2015. SSP - Journal of civil engineering: selected scientific papers, 10(2), 155-162. ISSN 1336-9024.10.2478/sspjce-2015-0027
Search in Google Scholar Back to article
[10] Zozulák, M. & Katunský, D. (2015). Numerical and experimental determination of in-structure temperature profiles. SSP - Journal of Civil Engineering, 10(1), 67-74. ISSN 1336-9024.10.1515/sspjce-2015-0007
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/sspjce-2016-0006 | Journal eISSN: 1338-7278 | Journal ISSN: 1336-9024

Journal RSS Feed

Language: English

Page range: 51 - 58

Published on: Jul 27, 2016

Published by: Technical University of Košice

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

reflective thermal insulation layer,

experimental measurements in climate chambers,

the optimal position,

thermal resistance

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other

© 2016 Martin Labovský, Martin Lopušniak, published by Technical University of Košice
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 11 (2016): Issue 1 (June 2016)