References
- ACI 207.2R-07 (2007)Report on Thermal and Volume Change Effects on Cracking of Mass Concrete. ACI Committee 207, 28 pp.
- ACI 224.2R-92 (ACI 2004)Cracking of Concrete Members in Direct Tension. ACI Committee 224, 12 pp.
- Bamforth, P.B. (2007)Early-age thermal crack control in concrete. CIRIA C660, London, 112 pp.
- Becker, A. (2009)Waterproof Concrete Tanks. Tiefbau 3, pp. 153–161
- Bobko, C.P. - Edwards, A.J., Seracino, R. and Zia, P. (2015)Thermal Cracking of Mass Concrete Bridge Footings in Coastal Environments. Journal of Performance of Constructed Facilities, Vol. 29, No. 6, pp. 1-11
- British Standard (BS) 8007. (1987)Design of Concrete Structures for Retaining Aqueous Liquids. British Standards Institution, 32 pp.
- Čajka, R. - Maňásek, P. - Sekanina, D. (2006)Reduction of Volume Changes of Concrete – Effects on State of Stress of Foundation. Proceedings of the International RILEM Conference on Volume Changes in Hardening Concrete, Lyngby, Denmark, pp. 195-204
- Carino, N.J. - Clifton, J.R. (1995)Prediction of Cracking in Reinforced Concrete Structures. NISTIR Report No. 5634, 51 pp.
- Deutscher Ausschuss für Stahlbeton (DAfStb) (2003)Richtlinie Wasserunduchlässige Bauwerke aus Beton (WU-Richtlinie) (Guideline Watertight Concrete Structures (WCS-Guideline)). 18 pp. (in German)
- Empelmann, M. - Krakowski, W. (2015)Erweitertes Modell zur Berechnung der Rissbreite (Extended model to calculate the crack width). Beton- und Stahlbetonbau, Vol. 110, No. 7, pp. 458–467 (in German)
- EN 1992-1-1. (2004)Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings. 225 pp.
- EN 1992-3. (2006)Design of Concrete Structures - Part 3: Liquid Retaining and Containment Structures. 23 pp.
- Fernandes, F. et al. (2014)On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials. Cement & Concrete Composites, 51, pp. 14–26
- Forth, J.P. - Martin, A.J. (2014)Design of Liquid Retaining Concrete Structures. Whittles Publishing, 192 pp.
- Kovler, K. - Bentur, A. (2009)Cracking Sensitivity of Normal- and High-Strength Concretes. ACI Materials Journal, Vol. 106, No. 6, pp. 537-542
- Kozikowski, R.L. - Suprenant, B.A. (2015)Controlling Early-Age Cracking in Mass Concrete. Concrete International, Vol. 37, No. 3, pp. 59-62
- Maekawa, K., - Chaube, R. - Kishi, T. (1999)Modelling of Concrete Performance: Hydration Microstructure Formation and Mass Transport. Taylor & Francis, 312 pp.
- Mihashi, H. - de B. Leite, J.P. (2004)State-of-the-Art Report on Control of Cracking in Early Age Concrete. Journal of Advanced Concrete Technology, No. 2, Vol. 2, pp. 141–15410.3151/jact.2.141
- Mineral Products Association - MPA (2015)Concrete Design Guide. No. 1: Guidance on the design of liquid-retaining structures. The Structural Engineer, Jan. 2015, pp. 44-48
- Model Code 2010. (2013)fib Model Code for Concrete Structures 2010. 434 pp.
- Neville, A.M. (2011). Properties of Concrete. 5th edition, Pearson Education Limited, 2865 pp.
- prEN 1992-1-1. (2017-04)Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings. 261 pp.
- RILEM TC 184-IFE. (2006) ‘Industrial Floors’. State-of-the-art Report. Report No. 33, 141 pp.
- Sant, G.N. (2009)Fundamental investigations related to the mitigation of volume changes in cement-based materials at early ages. PhD Dissertation, Purdue University, 201 pp.
- Schlicke, D. - Tue, N.V. (2015)Minimum reinforcement for crack width control in restrained concrete members considering the deformation compatibility. Structural Concrete, No. 2, pp. 221-232
- Shi, N. - Ouyang, J. - Zhang, R. - Huang, D. (2014)Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History. Advances in Materials Science and Engineering, Hindawi Publishing Corporation, 10 pp.
- Šmejkal, J. - Procházka, J. (2015)Výpočet šířky trhlin – 2. část (Calculation of Crack Widths – 2nd part). BETON TKS, Vol. 17, No. 1, pp. 72-78 (in Czech)
- Sonnenschein, R. - Bilčík, J. - Gajdošová, K. (2016)Parameter Analysis of the Reinforcement for the Width and Spacing Control of the Early-Age Cracks in Concrete. Key Engineering Materials, Trans Tech Publication, Vol. 691, pp. 14–27
- Springeschmid, R. (1984)Die Ermittlung von Spannungen infolge von Schwinden und Hydratationswärme in Beton (Determining stresses due to the shrinkage and heat from hydration in concrete). Beton- und Stahlbetonbau, No. 10, pp. 263–269 (in German)
- Sule, M.S. (2003)Effect of Reinforcement on Early-Age Cracking in High Strength Concrete. Master’s Thesis, TU Delft, 154 pp.
- Sule, M. - van Breugel, K. (2004)The effect of reinforcement on early-age cracking due to autogenous shrinkage and thermal effects. Cement & Concrete Composites, Vol. 26, No. 5, pp. 581-58710.1016/S0958-9465(03)00078-7