References
- AS3600-2001, Concrete Structures, Standards Australia, Sydney, Australia 2001.
- BS8110-1997, Structural Use of Concrete, Part 1 - Code of Practice for Design and Construction, British Standards Institution, London, 1997.
- Chethan K, R. Ramesh Babu, Katta Venkataramana and Akanshu Sharma (2009), “Studies on Dynamic Characteristics of 3D Reinforced Concrete Frame with masonry Infill,” Journal of CPRI, Vol 5 (2).
- Doh, J. H. and Fragomani, S. (2005), “Evaluation of Experimental Work on Concrete Walls in One and Two-way Action,” Australian Journal of Structural Engineering, Vol 6, No 1, pp 37-52.
- Doh, J. H., Lee, D. J., Guan, H., and Loo, Y. C., (2008), “Concrete Wall with Various Support Conditions” The 4th International Conference on Advances in Structural Engineering and Mechanics (ASEM’08), CD ROM Proceeding, Jeju, Korea, May 26-28, 2008, pp. 967-975.
- Doh, J. H. (2002), “Experimental and theoretical studies of normal and high strength concrete wall panels,” PhD Thesis, Griffith University, Gold Coast, Australia 2002.
- Fragomeni et al. (1995), “Concrete walls with and without openings supported on three sides”, National Library of Australia.
- Fragomeni, S. and Mendis, P. A. (1999), “Applicability of Current ACI318 Wall Design Formula for High Strength Concrete Walls,” Advances in Structural Engineering - International Journal, 2 (2): 103-108.
- Fragomeni, S. (1995), “Design of normal and high strength reinforced concrete walls,” PhD Thesis, University of Melbourne, Australia 1995.
- Kripanarayanan, K. M. (1977), “Interesting Aspect of the Empirical Wall Design Equation,” ACI Structural Journal, Vol. 74, No. 5, May 1977, pp. 204-207
- Md Khaja Moniuddin et al. (2013), “Earthquake analysis on 2D RC frames with different aspect ratios of masonry infill and monolithic panel,” IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 pISSN: 2321-7308, pp. 18-23.
- Oberlender, G. D. (1973), “Strength investigation of reinforced concrete load bearing wall panels,” Ph.D thesis, University of Texas, Arlington.
- P. G. Asteris and D. M. Cotsovos, (2012), “Numerical Investigation of the Effect of Infill Walls on the Structural Response of RC Frames,” he Open Construction and Building Technology Journal, 2012, 6,(Suppl 1-M11) 164-181
- Pillai, S. U. and Parthasarathy, C. V, (1977), “Ultimate Strength and Design of Concrete Walls, Building and Environment,” London, 12: 25-29.
- Saheb, S. M., & Desayi, P. (1989), “Ultimate Strength of RC Wall Panels in One-Way In-Plane Action,” Journal of Structural Engineering, 115(10): 2617 - 2617.
- Seddon, A. E. (1956), “The strength of concrete walls under axial and eccentric loads,” Symposium on Strength of Concrete Structures, Cement and Concrete Association, May, London.
- T. Paulay, M. Priestley (1992), “Seismic Design of Reinforced Concrete and Masonry Buildings,” A Wiley Interscience Publication.
- Zielinski, Z. A., Troitski, M. S. and Christodoulou, H. (1982),“Fullscale Bearing Strength Investigation of Thin Wall-Ribbed Reinforced Concrete Panels,” ACI Journal, 79: 313-321.
- Zielinski, Z. A., Troitski, M. S. and El-Chakieh, E. (1983), “Bearing Capacity Tests on Precast Concrete Thin-Wall Ribbed Panels,” Prestressed Concrete Institute Journal, Chicago, 28 (3): 89-103.