References
- [1] B
ustamante M., Doix B., A new model of LPC removable extensometers, Proceedings of 4th Int. Conf. on Pilling and Deep Foundations, STRESA, Italy, April 7–12, 1991. - [2] D
embicki E., Cudny M., Krasiński A., Zaleski K., Pylon foundation of a cable stayed bridge at the motorway ring road of Wrocław, 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, September 2–6, 2013. - [3] F
ellenius B.H., Tangent modulus of piles determined from strain data, The ASCE Geotechnical Engineering Division Foundation Congress, 1989, Vol. 1, 500–510. - [4] F
ellenius B.H., Brusey W.G., Pepe F., Soil setup, variable concrete modulus, and residual load for tapered instrumented piles in sand, ASCE Specialty Conf. on Performance Confirmation of Constructed Geotech. Facilities, University of Massachusetts, Amherst, USA, April 9–12, 2000. - [5] F
ellenius B.H., Determining the resistance distribution in piles. Part 1: Notes on of no-load reading and residual load. Part 2: Method for determining the residual load, Geotechnical News Magazine. 2002, 20(2), 35–38 and 20(3) 25–29. - [6] F
ellenius B.H., Determining the true distributions of load in instrumented piles, ASCE International Deep Foundation Congress, Orlando, Florida, 2002. - [7] F
ellenius B.H., Unified design of piled foundations with emphasis on settlement, ASCE, Current Practice and Future Trends in Deep Foundations, GSP No. 125, Los Angeles, California, 2004, 253–275. - [8] F
ellenius B.H., Kim S.R., Chung S.G., Long-term monitoring of strain in strain-gage instrumented piles, ASCE Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(11), 1583–1595. - [9] F
ellenius B.H., Ochoa M., Testing and design of a piled foundation project. A case history, Geotechnical Engineering, Journal of the Southeast Asian Geotechnical Society, 2009, 40(3), 129–137. - [10] K
im S.R., Chung S.G., Fellenius B.H., Distribution of residual load and true shaft resistance for a driven instrumented test pile, Canadian Geotechnical Journal, 2011, (48)4, 583–598. - [11] K
rasiński A., Sieńko R., Pomiar pionowego rozkładu siły w palu podczas testów statycznych, 56 Konferencja Naukowa Kielce–Krynica, 19–24.09.2010, (in Polish). - [12] K
rasiński A., Sieńko R., Wykorzystanie pomiaru pionowego rozkładu siły w palu do interpretacji testów statycznych, Magazyn Autostrady, 2010, 11, 24–28, (in Polish). - [13] K
rasiński A., Wyniki badań terenowych pali i kolumn wkręcanych, Inżynieria Morska i Geotechnika, 2011, 6, (in Polish). - [14] K
rasiński A., Numerical simulation of screw displacement pile interaction with non-cohesive soil, Archives of Civil and Mechanical Engineering, 2014, Vol. 14, No 1. 122–133. - [15] K
rasiński A., Kusio T., Pile model tests using strain gauge technology, Studia Geotechnica et Mechanica, 2015, 37(3), 49–52. - [16] L
iu B., Zhang D., Xi P., Mechanical behaviors of SD and CFA piles using BOTDA-based fiber optic sensor system: A comparative field test study, Measurement, July 2017, Vol. 104, 253–262. DOI: 10.1016/j.measurement.2017.03.038.10.1016/j.measurement.2017.03.038 - [17] S
ahajda , K., Discussion to the paper of A. Krasiński: “The results of field tests on screw piles and columns”, Inżynieria Morska i Geotechnika, 2012, Vol. 33, No. 2, 114–118 (in Polish). - [18] S
iegel T.C., Mcgillivray A., Interpreted residual load in an augered cast-in-place pile, 34th Annual Conference on Deep Foundations, Deep Foundations Institute, 2009, 173–182.