[1] BUKOWSKA M., ĆMIEL S., Charakterystyka zmian właściwości skał karbońskich w strefach tektoniki nieciągłej w Górnośląskim Zagłębiu Węglowym, Górnictwo i Geoinżynieria, Zeszyt 2, 2011, 111-119, (in Polish).
[2] GAO J., LIU H.Y., ZHANG M., AZIZ M.M.A., Failure process and support method of roadways excavated in inclined rock mass strata, Civil Engineering and Architecture, 2014, No. 2, 304-312.10.13189/cea.2014.020803
[4] HONGWEI W., YAODONG J., SHENG X., LINGTAO M., ZHINAN L., DAIXIN D., DENGQIANG Z., Influence of fault slip on mininginduced pressure and optimization of roadway support design in fault-influenced zone, Journal of Rock Mechanics and Geotechnical Engineering, 2016, Vol. 8, 660-671.10.1016/j.jrmge.2016.03.005
[6] MAŁKOWSKI P., NIEDBALSKI Z., MAJCHERCZYK T., Investigations of hard coal mine roadways stability in stratified rock, 8th International Symposium on Ground Support in Mining and Underground Construction, 12-14.09.2016, Luleå: E. Nordlund, T.H. Jones, A. Eitzenberger (eds.), 2016, 1-13.
[11] ONARGAN T., KUCUK K., DELIORMANLI A., SAYDAM S., KOCA M.Y., Ground control for underground Evaporite Mine in Turkey, [in:] T. Onargan (ed.), Earth and Planetary Sciences “Mining Methods”, Chapter 3, 2012, 33-46. DOI: 10.5772/39174.10.5772/39174
[13] PRUSEK S., Changes in cross-sectional area of gateroads in longwalls with roof caving, ventilated with “U” and “Y” systems, Archives of Mining Sciences, 2015, Vol. 60, 549-564.10.1515/amsc-2015-0036
[15] PRUSEK S., BOCK S., Assessment of rock mass stresses and deformations around mine workings based on threedimensional numerical modeling, Archives of Mining Sciences, 2008, Vol. 53, 349-360.
[16] SHEN H.C., CHENG Y.F., WANG J.Y., Finite element study on the effects of faults on the ground stress field, Petroleum Geology and Oilfield Development in Daqing, 2007, No. 4, 34-37.
[17] SHENG-QI Y., MIAO C., HONG-WEN J., KUN-FU C., BO M., A case study on large deformation failure mechanism of deep soft rock roadway in Xin’An coal mine, China, Engineering Geology, Vol. 217, 89-101. Retrieved on 28 December 2016, http:// www.sciencedirect.com/science/article/pii/S0013795216308614.10.1016/j.enggeo.2016.12.012
[18] SHUAI Y., JIANBIAO B., WENFENG L., JIGANG C., LEI L., Deformation mechanism and stability control of roadway along a fault subjected to mining, International Journal of Mining Science and Technology, 2012, Vol. 22, 559-565.10.1016/j.ijmst.2012.01.020
[21] Uproszczone zasady doboru obudowy odrzwiowej wyrobisk korytarzowych w zakładach wydobywających węgiel kamienny. (2001). Seria: Instrukcje nr 15, Katowice: Główny Instytut Górnictwa, 2001, (in Polish).
[22] YAO Q., LI X., PAN F., WANG T., WANG G., Deformation and Failure Mechanism of Roadway Sensitive to Stress Disturbance and Its Zonal Support Technology, Shock and Vibraton, 2016, Vol. 6, 1-14, DOI: 10.1155/2016/1812768.10.1155/2016/1812768
[23] Zasady projektowania i doboru obudowy wyrobisk korytarzowych w zakładach wydobywających węgiel kamienny. Wydanie II - poprawione, Politechnika Śląska, Instytut Eksploatacji Złóż, Gliwice 2000, (in Polish).