Numerical Estimation of the Pile Toe and Shaft Unit Resistances During the Installation Process in Sands
By: Jakub Konkol
References
- [1] DONEA J., HUERTA A., PONTHOT J.P., RODRÍGUEZ-FERRAN A., Arbitrary Lagrangian-Eulerian methods, Encyclopedia of Computational Mechanics, 2004, DOI: 10.1002/ 0470091355.ecm009.
- [2] NOH W.F., CEL: a time-dependent, two-space-dimensional, coupled Eulerian-Lagrangian code, [in:] B. Adler, S. Fernbach, M. Rotenberg (eds.), Methods in Computional Physics, Volume 3. Fundamental Methods in Hydrodynamics, AcademicPress, New York, 1964, 117-179.
- [3] GINGOLD R.A., MONAGHAN J.J., Smoothed particle hydrodynamics: theory and application to non-spherical stars, Monthly notices of the Royal Astronomical Society, 1977, 181(3), 375-389.
- [4] KAFAJI I.K.A., Formulation of a dynamic material point method (MPM) for geomechanical problems, Doctoral dissertation, Institut für Geotechnik der Universität Stuttgart, 2013.
- [5] WIĘCKOWSKI Z., The material point method in large strain engineering problems, Computer Methods in Applied Mechanics and Engineering, 2004, 193(39), 4417-4438.
- [6] OÑATE E., IDELSOHN S.R., DEL PIN F., AUBRY R., The particle finite element method - an overview, International Journal of Computational Methods, 2004, 1(02), 267-307. DOI: 10.1142/S0219876204000204
- [7] QIU G., HENKE S., GRABE J., Applications of Coupled Eulerian- Lagrangian method to geotechnical problems with large deformations, Proceeding of SIMULIA customer conference, 2009, 420-435.
- [8] PUCKER T., GRABE J., Numerical simulation of the installation process of full displacement piles, Computers and Geotechnics, 2012, 45, 93-106. DOI: 10.1016/ j.compgeo.2012.05.006.
- [9] QIU G., HENKE S., GRABE J., Applications of a Coupled Eulerian- Lagrangian approach on geomechanical problems involving large deformation, Computers and Geotechnics, 2011, 38(2011), 30-39. DOI: 10.1016/j.compgeo.2010.09.002.
- [10] ROBERTSON P.K., CABAL K.L., Cone Penetration Testing for Geotechnical Engineering, (4th ed.), Signal Hill, Greg Drilling & Testing, Inc., 2010.
- [11] MARCHETTI S., MONACO P., TOTANI G., CALABRESE M., The Flat Dilatometer Test (DMT) in Soil Investigations-A Report by the ISSMGE Committee TC16, Proc. Int. Conf. on in Situ Measurement of Soil Properties and Case Histories, Bali 2001, 95-131.
- [12] SCHANZ T., VERMEER P.A., Angles of friction and dilatancy of sand, Géotechnique, 1996, 46(1), 145-152.
- [13] BOLTON M.D., The strength and dilatancy of sands, Geotechnique, 1986, 36(1), 65-78.
- [14] JAMIOLKOWSKI M., LO PRESTI D.C.F., MANASSERO M., Evaluation of relative density and shear strength of sands from CPT and DMT, [in:] Soil behavior and soft ground construction, 2003, 201-238, ASCE. DOI: 10.1061/40659(2003)7.
- [15] Dassault Systèmes. (2013). Abaqus User Manual Version 6.13.
- [16] YU M.-H., MA G.-W., QIANG H.-F., ZHANG Y.-Q., Generalized Plasticity, Springer, Berlin, 2006, DOI: 10.1007/3-540-30433-9.
- [17] TOMLINSON M., WOODWARD J., Pile design and Construction Practice, (5th ed.), Taylor & Francis, New York 2008.
- [18] BUSTAMANTE M., GIANESELLI L., Pile bearing capacity prediction by means of static penetrometer CPT, Proceedings of the 2-nd European Symposium on Penetration Testing, May 1982, pp. 493-500.
- [19] KULHAWY F.H., Limiting Tip and Side Resistance-Fact or Fallacy?, [in:] Foundation Engineering in the Face of Uncertainty: Honoring Fred H. Kulhawy, ASCE, 1984, 18-36
DOI: https://doi.org/10.1515/sgem-2015-0005 | Journal eISSN: 2083-831X (formerly 0137-124X) | Journal ISSN: 0137-6365
Language: English
Page range: 37 - 44
Published on: Mar 27, 2015
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Related subjects:
© 2015 Jakub Konkol, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.