EN AW-2024 Wrought Aluminum Alloy Processed by Casting with Crystallization under Pressure

Branislav Vanko; Ladislav Stanček; Roman Moravčík

doi:10.1515/scjme-2017-0024

.blurhash-client-img { display: none !important; }

EN AW-2024 Wrought Aluminum Alloy Processed by Casting with Crystallization under Pressure

Strojnícky časopis - Journal of Mechanical Engineering

Volume 67 (2017): Issue 2 (November 2017)

By: Branislav Vanko, Ladislav Stanček and Roman Moravčík

Open Access

|Nov 2017

Abstract

By using the wrought aluminum alloys can be created castings with higher mechanical properties than the castings made of standard foundry aluminum alloys, but it is necessary to handle the process of making sound castings without any defects such as hot tears and shrinkage porosity. In experiments, we have been studied of wrought aluminum alloy EN AW-2024 which has been processed by the casting with crystallization under pressure with forced flow. Castings were heat treated by standard T6 heat treatment.

References

[1] L. Starek, J. Kubla. Smart and intelligent material systems. Journal of Mechanical Engineering - Strojnícky časopis 2000 (51), No. 1, 1 - 34.
Search in Google Scholar Back to article
[2] K. Chinnathambi. Study on mass effect of indirect squeeze cast 2014 wrought aluminum alloy. Die Casting Engineer, September 2006, 40 - 47.
Search in Google Scholar Back to article
[3] E. Hajjari, M. Divandari. An investigation on the microstructure and tensile properties of direct squeeze cast and gravity die cast 2024 wrought Al alloy. Materials and Design 2008 (29), 1685 - 1689.
Search in Google Scholar Back to article
[4] S. Shankar, D. Saha, M.M. Makhlouf, D. Apelian. Casting of wrought aluminum-based alloys. Die Casting Engineer, March 2004, 52 - 56.
Search in Google Scholar Back to article
[5] L. Yanlei, L. Yuandong, L. Chun, W. Huihui. Microstructure characteristics and solidification behavior of wrought aluminum alloy 2024 rheo-diecast with self-inoculation method. China Foundry 2012 (9), No. 4, 328 - 336.
Search in Google Scholar Back to article
[6] H. Guo, X. Yang, M. Zhang. Microstructure characteristics and mechanical properties of rheoformed wrought aluminum alloy 2024. Transactions of Nonferrous Metals Society of China 2008 (18), 555 - 561.
Search in Google Scholar Back to article
[7] U.A. Curle. Semi-solid near-net shape rheocasting of heat treatable wrought aluminum alloys. Transactions of Nonferrous Metals Society of China 2010 (20), 1719 - 1724.
Search in Google Scholar Back to article
[8] B. Samanta, S.A. Al-Araimi, R.A. Siddiqui. A neutral network approach to estimate fatigue life of 6063 aluminum alloy. Journal of Mechanical Engineering - Strojnícky časopis 2002 (53), No. 1, 36 - 44.
Search in Google Scholar Back to article
[9] D.G. Eskin, Suyitno, L. Katgerman. Mechanical properties in the semi-solid state and hot tearing of aluminium alloys. Progress in Materials Science Forum, 2004 (49), 629 - 711.
Search in Google Scholar Back to article
[10] D. Viano, D. StJohn, J. Grandfield, C. Cáceres. Hot tearing in aluminium – copper alloys. In: Light metals 2005. TMS (The Minerals, Metals & Materials Society), Pittsburgh, USA, 2005, 1069 - 1073.
Search in Google Scholar Back to article
[11] L. Stanček, B. Vanko. Instrument for casting with crystallization under pressure with increasing of flow intensity. In: Technology 2007. STU Bratislava, Slovakia, 2007, CD-ROM, (in Slovak).
Search in Google Scholar Back to article
[12] W.Y. Kim, C.G. Kang, B.M. Kim. The effect of solid fraction on rheological behavior of wrought aluminum alloys in incremental compression experiments with a closed die. Materials Science and Engineering A 2007 (447), 1 - 10.
Search in Google Scholar Back to article
[13] Y. Zhong, G. Su, K. Yang. Microsegregation and improved methods of squeeze casting 2024 aluminium alloy. Journal of Materials Science & Technology 2003 (19), No. 5, 413 - 416.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/scjme-2017-0024 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472

Journal RSS Feed

Language: English

Page range: 109 - 116

Published on: Nov 18, 2017

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

wrought aluminum alloy,

EN AW-2024,

casting with crystallization under pressure,

mechanical properties

Related subjects:

Engineering,

Mechanical engineering,

Fundamentals of mechanical engineering,

Mechanics

© 2017 Branislav Vanko, Ladislav Stanček, Roman Moravčík, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 67 (2017): Issue 2 (November 2017)