Analysis of Mechanical Properties of the “Bearing” Part Based on Polished Samples

Zdeněk Padovec; Radek Sedláček; Milan Růžička; Pavel Růžička

doi:10.1515/scjme-2017-0021

.blurhash-client-img { display: none !important; }

Analysis of Mechanical Properties of the “Bearing” Part Based on Polished Samples

Strojnícky časopis - Journal of Mechanical Engineering

Volume 67 (2017): Issue 2 (November 2017)

By: Zdeněk Padovec, Radek Sedláček, Milan Růžička and Pavel Růžička

Open Access

|Nov 2017

Abstract

Presented work describes the use of algorithm for the computation of thermo-elastic properties of randomly reinforced composite which is based on histogram from image analysis done on ITAM, CAS. Three polished samples from “Bearing” part were analyzed. Results are used for verification of the algorithm functionality and primarily for computation of thermo-elastic properties which were compared with each other and used in modified FE analysis.

References

[1] Z. Padovec et. al. Comparison of Thermoelastic Properties of a Randomly Reinforced Composite Computed by Classic Lamination Theory and by Monte Carlo Simulation, Mechanics of Composite Materials 2017 (53), No. 1, 1 - 12.
Search in Google Scholar Back to article
[2] Z. Padovec et. al. Analysis and Optimization of Aircraft Composite Part “Bearing”. In Applied Mechanics 2016 - Book of Abstracts. Bratislava. Slovak University of Technology in Bratislava 2016, 39 – 40. ISBN 978-80-227-4547-5.
Search in Google Scholar Back to article
[3] J. Hos et. al. Calibration of an Image Processing Tool for Analysis of Fibre Orientation in Fibre Reinforced Composites. In Proceedings of 13th Youth Symposium on Experimental Solid Mechanics. Praha. České vysoké učení technické v Praze, Fakulta dopravní 2014, 48 – 51. ISBN 978-80-01-05556-4.
Search in Google Scholar Back to article
[4] V. Laš. Mechanika kompozitních materiálů. Plzeň, Západočeská univerzita, 2008. 200 pages. ISBN 978-80-7043-689-9.
Search in Google Scholar Back to article
[5] A. Choudhury et al. Effect of Lamination Angle and Thickness on Analysis of Composite Plate Under Thermo Mechanical Loading. Journal of Mechanical Engineering – Strojnícky časopis 2017 (67), No. 1, 5 - 22.
Search in Google Scholar Back to article
[6] A. Choudhury et al. A simple higher-order theory for dynamic analysis of composite plate. Journal of Mechanical Engineering – Strojnícky časopis 2010 (61), No. 3, 169 - 182.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/scjme-2017-0021 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472

Journal RSS Feed

Language: English

Page range: 85 - 90

Published on: Nov 18, 2017

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

Related subjects:

Mechanical engineering,

Fundamentals of mechanical engineering,

Mechanics

© 2017 Zdeněk Padovec, Radek Sedláček, Milan Růžička, Pavel Růžička, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 67 (2017): Issue 2 (November 2017)