Identification of Fatigue Constants by Means of 3D Method

Dagmar Ličková; Radim Halama; Zdeněk Poruba

doi:10.1515/scjme-2016-0025

.blurhash-client-img { display: none !important; }

Identification of Fatigue Constants by Means of 3D Method

Strojnícky časopis - Journal of Mechanical Engineering

Volume 66 (2016): Issue 2 (November 2016)

By: Dagmar Ličková, Radim Halama and Zdeněk Poruba

Open Access

|Dec 2016

Abstract

The conventional method for evaluation of the fatigue constants uses one set of experimental data from strain-controlled uniaxial fatigue tests. However, these constants do not ensure the compatibility conditions. The new 3D method retains the mathematical and physical relationships between curves considered. This paper presents a way of implementation of the identification procedure and shows results obtained for three types of materials.

References

[1] Niesłony, A., El Dsoki, Ch., Kaufmann, H., Krug, P.: New method for evaluation of the Manson-Coffin-Basquin and Ramberg-Osgood equations with respect to compatibility. International Journal of Fatigue, 2008, 30, 1967-77.
Search in Google Scholar Back to article
[2] Bäumel, A., Seeger, T.: Material data for cyclic loading, supplement 1, materials science monographs, 61. Amsterdam: Elsevier Science, 1990.
Search in Google Scholar Back to article
[3] Ramberg, W., Osgood, WR.: Description of stress-strain curves by three parameters, Technical note no. 902, Washington (DC), National Advisory Committee for Aeronautics, 1943.
Search in Google Scholar Back to article
[4] Halama, R., Markopoulos, A., Šofer, M., Poruba, Z., Matušek, P.: Cyclic plastic properties of class C steel emphasizing on ratcheting: testing and modelling, Strojnícky časopis - Journal of Mechanical Engineering, 2015, 65, No. 1, 21-26.
Search in Google Scholar Back to article
[5] Šofer, M., Fajkoš, R., Halama, R.: Influence of Induction Hardening on Wear Resistance in Case of Rolling Contact, Strojnícky časopis - Journal of Mechanical Engineering, 2016, 66, No.1, 17-26.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/scjme-2016-0025 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472

Journal RSS Feed

Language: English

Page range: 107 - 116

Published on: Dec 17, 2016

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

Related subjects:

Mechanical engineering,

Fundamentals of mechanical engineering,

Mechanics

© 2016 Dagmar Ličková, Radim Halama, Zdeněk Poruba, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 66 (2016): Issue 2 (November 2016)