Comparison of the Viscous Liquids Spraying by the OIG and the Oil Configurations of an Effervescent Atomizer at Low Inlet Pressures
By: Marek Mlkvik, Róbert Olšiak and Marek Smolar
References
- [1] ABDULKADIR, M., HERNANDEZ-PEREZ, V., LO, S., LOWNDES, I.S., AZZOPARDI, B.J.: Comparison of experimental and Computational Fluid Dynamics (CFD) studies of slug flow in a vertical riser,, Volume, November 2015, pp. 468-483, ISSN 0894-1777
- [2] BAKER, O.: Simultaneous flow of oil and gas,,, 1954, pp. 185–195
- [3] BARNEA, D.: A unified model for predicting flow-pattern transitions for the whole range of pipe inclinations,,, 1987
- [4] BUCKNER, H.N., SOJKA P.E.: Effervescent atomization of high-viscosity fluids. Part 1: Newtonian liquids,,, 1991, pp. 239–252
- [5] FERREIRA G., GARCÍA J.A., BARRERAS F., LOZANO A., LINCHETA E.: Design optimization of twin-fluid atomizers with an internal mixing chamber for heavy fuel oils,, 2009, pp. 270–278
- [6] JEDELSKY J., JICHA M.: Energy conversion during effervescent atomization,, Volume, September 2013, Pages 836-844, ISSN 0016-2361
- [7] LORCHER, M., SCHMIDT, F., MEWES, D.: Flow field and phase distribution inside effervescent atomizers. In:, 2003, pp. 12–9.
- [8] MANDAL, A., JOG, M.A., XUE, J., IBRAHIM, A.A.: Flow of power-law fluids in simplex atomizers,, Volume, Issue 5, October 2008, pp. 1494-1503, ISSN 0142-727X
- [9] MLKVIK, M., STÄHLE, P., SCHUCHMANN, H. P., GAUKEL, V., JEDELSKY, J., JICHA, M.: Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size.,, 2015, pp. 19-31
- [10] SCHRÖDER J., KRAUS S., ROCHA B.B., GAUKEL V., SCHUCHMANN H.P.: Characterization of gelatinized corn starch suspensions and resulting drop size distributions after effervescent atomization,, 2011, pp. 656–662
- [11] STÄHLE, P., GAUKEL, V., SCHUCHMANN, H.P.: Influence of mixing chamber length and liquid viscosity on the effervescent atomization of maltodextrin solutions. In:2013, Chania, Greece
- [12] GOGA V., HUČKO B.: Phenomenological Material Model of Foam Solids. InVol., No. 1, 2015, pp.5-20, ISSN 0039-2472
Language: English
Page range: 53 - 64
Published on: Aug 19, 2016
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2016 Marek Mlkvik, Róbert Olšiak, Marek Smolar, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.