Asymmetric rolling process
References
- [1] Buxton, S.A.E., Browningt, S.C. (1972): Turn-up and turn-down in hot rolling. Journal of Mechanical Engineering Science, 14(4), pp. 245-254.10.1243/JMES_JOUR_1972_014_032_02
- [2] Jin, H., Lloyd, D.J. (2004): The Tensile Response of a Fine-Grained AA5754 Alloy Produced by Asymmetric Rolling and Annealing. Metallurgical and Materials Transactions A, 35 A, pp. 997-1006.
- [3] Kang, S.B., Min, B.K., Kim, H.W., Wilkinson, D.S., Kang, J. (2005): Effect of Asymmetric Rolling on the Texture and Mechanical Properties of AA6111-Aluminium Sheet. Metallurgical and Materials Transactions A, 36A, pp. 3141-3149.
- [4] Jin, H., Lloyd, D.J. (2005): The reduction of planar anisotropy by texture modification through asymmetric rolling and annealing in AA5754. Materials Science and Engineering A, 399, pp. 358-367.
- [5] Kawałek, A. (2007): The analysis of the asymmetric plate rolling process. Journal of Achievements in Materials and Manufacturing Engineering, 23(2), pp. 63-66.
- [6] Kiefer, T., Kugi, A. (2008): An Analytical Approach for Modelling Asymmetrical Hot Rolling of Heavy Plates. Mathematical and Computer Modelling of Dynamical Systems, 14, pp. 1-19.
- [7] Sidor, J., Miroux, A., Petrov, R., Kestens, L. (2008): Microstructural and crystallographic aspect of conventional and asymmetric rolling processes. Acta Materialia, 56, pp. 2495-2507.10.1016/j.actamat.2008.01.042
- [8] Sidor, J., Miroux, A., Petrov, R., Kestens, L. (2008): Controlling the plastic anisotropy in asymmetrically rolled aluminium sheets. Philosophical Magazine, 88, pp. 3779-3792.
- [9] Roumina, R., Sinclair, C. (2008): Deformation geometry and through-thickness strain gradients in asymmetric rolling. Metallurgical and Materials Transaction A, 39(2495), pp. 2495-2503.
- [10] Zhang, S.H., Zhao, D.W., Gao, C.R., Wang, G.D. (2012): Analysis of asymmetrical sheet rolling by slab method. International Journal of Mechanical Sciences, 65, pp. 168-176.
- [11] Nikolaev, V.A., Vasilyev, A.A. (2010): Analysis of Strip Asymmetrical Cold Rolling Parameters. Metallurgical and Mining Industry, 2, pp. 405-412.
- [12] Jin, H., Lloyd, D.J. (2010) The different effects of asymmetric rolling and surface friction on formation of shear texture in aluminium alloy AA5754. Materials Science and Technology, 26(6), pp. 754-760.
- [13] Liu, J., Kawalla, R. (2012): Influence of asymmetric hot rolling on microstructure and rolling force with aus- tenitic steel. Transactions of Nonferrous Metals Society of China, 22, pp. 504-511.10.1016/S1003-6326(12)61753-1
- [14] Anders, D., Münker, T., Artel, J., Weinberg, K. (2012): A dimension analysis of front-end bending in plate rolling applications. Journal of Materials Processing Technology, 212, pp. 1387-1398.
- [15] Nilsson, A., Salvator, I., Putz, P.-D., Goldhahn, G., Malbrancke, J. (2012): Using asymmetrical rolling for increased production and improved material properties. European Union.
- [16] Inoue, H. (2012): Texture Control of Aluminium and Magnesium Alloys by the Symmetric/Asymmetric Combination Rolling Process. Materials Science Forum, 702-703, pp. 68-75.
- [17] Azbanbayev, E., Isagulov, A., Ashkeyev, Z. (2013): Mathematical simulation of the process of rolling in the back taper rolls. In: 22nd International Conference on Metallurgy and Materials, 15.5.-17.5.2013, Brno, Czech Republic.
- [18] Wronski, S., Wierzbanowski, K., Wronski, M., Bacroix, B. (2014): Three dimensional analysis of asymmetric rolling with flat and inclined entry. Archives of Metallurgy and Material, 59(2), pp. 585-591.
- [19] Aljabri, A., Jiang, Z., Wie, D. (2014): Analysis of thin strip profile during asymmetrical cold rolling with roll crossing and shifting mill. Advanced Materials Research, 894, pp. 212-216.
- [20] Tamini, S., Correia, J.P., Lopes, A.B., Ahzi, S., Barlat, F., Gracio, J.J. (2014): Asymmetric rolling of thin AA5182 sheet: Modellingand experiments. Materials Science and Engineering A, 603, pp. 150-159.
- [21] Zuo, Y.-b., Fu, X., Cui, J.-z., Tang, X.-y., Mao, L., Li, L., Zhu, Q.-f. (2014): Shear deformation and plate shape control of hot-rolled aluminium alloy thick plate prepared by asymmetric rolling process. Transactions of Nonferrous Metals Society of China, 24, pp. 2220-2225.
- [22] Dutta, S., Kaiser, M.S., (2014): Effect of asymmetric rolling on formability of pure aluminium. Journal of Mechanical Engineering, 44(2), pp. 94-99.
- [23] Ucuncuoglu, S., Ekerim, A., Secgin, G.O., Duygulu, O. (2014): Effect of asymmetric rolling process on the microstructure, mechanical properties and texture of AZ31 magnesium alloys sheet produced by twin roll casting technique. Journal of Magnesium and Alloys, 2, pp. 92-98.
- [24] Pesin, A., Pustovoytov, D., Sverdlik, M. (2014): Influence of Different Asymmetric Rolling Processes on Shear Strain. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 8(6), pp. 477-479.
- [25] Parvizi, A., Pasoodeh, B., Abrinia, K., Akbari, H. (2015): Analysis of curvature and width of the contact area in asymmetrical rolling of wire. Journal of Manufacturing Processes, 20, pp. 245-249.
- [26] Lee, K., Han, J., Park, J., Kim, B., Ko, D. (2015): Prediction and control of front-end curvature in hot finish rolling process. Advances in Mechanical Engineering, 7(11), pp. 1-10.
- [27] Alexa, V., Ratiu, S., Kiss, I. (2015): Metal rolling - Asymmetrical rolling process. In: International Conference on Applied Sciences, pp. 1-10.
- [28] Pesin, A., Chukin, M., Pustovoytov, D. (2015): Finite Element Analysis of Symmetric and Asymmetric Threeroll Rolling Process. MATEX Web of Conference, 26, 03006.
- [29] Liu, X., Liu, X.-h., Song, M., Sun, X.-k., Liu, L.-z. (2016): Theoretical analysis of minimum metal foil thickness achievable by asymmetric rolling with fixed identical roll diameters. Transactions of Nonferrous Metals Society of China, 26, pp. 501-507.10.1016/S1003-6326(16)64138-9
- [30] Jianping, L., Zhenguang, L., Jing, L. (2016): Influence of Asymmetric Hot Rolling on Microstructure and Mechanical Property of Ti-6Al-4V Alloy Sheet. Rare Metal Materials and Engineering, 45(5), pp. 1168-1174.10.1016/S1875-5372(16)30114-X
- [31] Bintu, A., Vincze, G., Picub, R.C., Lopes, A.B. (2016): Effect of symmetric and asymmetric rolling on the mechanical properties of AA5182. Materials and Design, 100, pp. 151-156.
- [32] Minton, J.J., Cawthorn, C.J., Brambley, E.J. (2016): Asymptotic analysis of asymmetric thin sheet rolling. International Journal of Mechanical Sciences, 113, pp. 36-48.
- [33] Ma, B., Li, C., Wang, J., Cai, B., Sui, F. (2016): Influence of asymmetric hot rolling on through-thickness microstructure gradient of Fe-20Mn-4Al-0.3C non-magnetic steel. Material Science and Engineering, A671, pp. 190-197.
- [34] Diniz, S.B., Benatti, E.A., Paula, A. dos S., Bolmaro, R.E., da Silva, L.C., Meirelles, B.G. (2016): Microstructural evaluation of an asymmetrically rolled and recrystallized 3105 aluminium alloy. Journal of Materials Research and Technology, 5(2), pp. 183-189.
- [35] History of Steelworks’ Plant and Equipment [online]. Talk Talk, 2017, [cited 1/7/2017]. Available on: <http://myweb.tiscali.co.uk/clydebridge/History%20of%20Steel%20Plant.htm#Fritz>.
DOI: https://doi.org/10.1515/rmzmag-2017-0014 | Journal eISSN: 1854-7400
Language: English
Page range: 151 - 160
Submitted on: Feb 15, 2017
Accepted on: Jun 9, 2017
Published on: Dec 29, 2017
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Keywords:
Related subjects:
© 2017 Peter Fajfar, Alenka Šalej Lah, Jakob Kraner, Goran Kugler, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.