References
- Mo, K. H., U. J. Alengaram, and M. Z. Jumaat. A review on the use of agriculture waste material as lightweight aggregate for reinforced concrete structural members. Advances in Materials Science and Engineering, Vol. 2014, 2014, pp. 1–9.
- Bian, Z., Y. Huang, Y. Liu, J.-X. Lu, D. Fan, F. Wang, et al. A novel foaming-sintering technique for developing eco-friendly lightweight aggregates for high strength lightweight aggregate concrete. Journal of Cleaner Production, Vol. 448, 2024, id. 141499.
- Gencel, O., M. Oguz, A. Gholampour, and T. Ozbakkaloglu. Recycling waste concretes as fine aggregate and fly ash as binder in production of thermal insulating foam concretes. Journal of Building Engineering, Vol. 38, 2021, id. 102232.
- Othuman Mydin, M. A., P. Jagadesh, A. Bahrami, A. Dulaimi, Y. Onuralp Ozkilic, and R. Omar. Enhanced fresh and hardened properties of foamed concrete modified with nano-silica. Heliyon, Vol. 10, No. 4, 2024, id. e25858.
- Yang, F., Y. Hua, W. Feng, J. Zheng, and Y. Yang. Failure criterion and constitutive model for unsaturated polyester polymer concrete under true tri-axial compression. Construction and Building Materials, Vol. 435, 2024, id. 136875.
- Hamada, H. M., A. Al-Attar, F. Abed, S. Beddu, A. M. Humada, A. Majdi, et al. Enhancing sustainability in concrete construction: A comprehensive review of plastic waste as an aggregate material. Sustainable Materials and Technologies, Vol. 40, 2024, id. e00877.
- Hanratty, N., M. Khan, and C. McNally. The role of different clay types in achieving low-carbon 3D printed concretes. Buildings, Vol. 14, No. 7, 2024, id. 2194.
- Lao, J.-C., B.-T. Huang, L.-Y. Xu, M. Khan, Y. Fang, J.-G. Dai, et al. Seawater sea-sand Engineered Geopolymer Composites (EGC) with high strength and high ductility. Cement and Concrete Composites, Vol. 138, 2023, id. 104998.
- Eriksen, M. K., K. Pivnenko, G. Faraca, A. Boldrin, and T. F. Astrup. Dynamic material flow analysis of PET, PE, and PP flows in Europe: evaluation of the potential for circular economy. Environmental Science & Technology, Vol. 54, No. 24, 2020, pp. 16166–16175.
- Ali, B., M. Fahad, S. Ullah, H. Ahmed, R. Alyousef, and A. Deifalla. Development of ductile and durable high strength concrete (HSC) through interactive incorporation of coir waste and silica fume. Materials, Vol. 15, No. 7, 2022, id. 2616.
- Khawaja, S. A., U. Javed, T. Zafar, M. Riaz, M. S. Zafar, and M. K. Khan. Eco-friendly incorporation of sugarcane bagasse ash as partial replacement of sand in foam concrete. Cleaner Engineering and Technology, Vol. 4, 2021., id. 100164.
- Al-Shwaiter, A., H. Awang, and M. A. Khalaf. Performance of sustainable lightweight foam concrete prepared using palm oil fuel ash as a sand replacement. Construction and Building Materials, Vol. 322, 2022, id. 126482.
- Jin, P., L. Li, Z. Li, W. Du, M. Khan, and Z. Li. Using recycled brick powder in slag based geopolymer foam cured at ambient temperature: Strength, thermal stability and microstructure. Construction and Building Materials, Vol. 452, 2024, id. 139008.
- Bhardwaj, B. and P. Kumar. Waste foundry sand in concrete: A review. Construction and Building Materials, Vol. 156, 2017, pp. 661–674.
- Priyadarshini, M. and J. P. Giri. Use of recycled foundry sand for the development of green concrete and its quantification. Journal of Building Engineering, Vol. 52, 2022, id. 104474.
- Selvakumar, M., C. Srimathi, S. Narayanan, and B. Mukesh. Study on properties of foam concrete with foundry sand and latex. Materials Today: Proceedings, Vol. 80, 2023, pp. 1055–1060.
- Saikia, N., and J. De Brito. Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Construction and Building Materials, Vol. 34, 2012, pp. 385–401.
- Guo, Z., Q. Sun, L. Zhou, T. Jiang, C. Dong, and Q. Zhang. Mechanical properties, durability and life-cycle assessment of waste plastic fiber reinforced sustainable recycled aggregate self-compacting concrete. Journal of Building Engineering, Vol. 91, 2024, id. 109683.
- Tayeh, B. A., I. Almeshal, H. M. Magbool, H. Alabduljabbar, and R. Alyousef. Performance of sustainable concrete containing different types of recycled plastic. Journal of Cleaner Production, Vol. 328, 2021, id. 129517.
- BSI. (2015). BS 1881–124:2015. Testing concrete–Part 124: Methods for analysis of hardened concrete. British Standards Institution, London, UK.
- Gencel, O., B. Balci, O. Y. Bayraktar, M. Nodehi, A. Sarı, G. Kaplan, et al. The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete. Journal of Building Engineering, Vol. 54, 2022, id. 104689.
- Al Bakri Abdullah, M. M., Z. Yahya, M. F. Mohd Tahir, K. Hussin, M. Binhussain, and A. V. Sandhu. Fly ash based lightweight geopolymer concrete using foaming agent technology. Applied Mechanics and Materials, Vol. 679, 2014, pp. 20–24.
- Amran, Y. H. M., N. Farzadnia, and A. A. Abang Ali. Properties and applications of foamed concrete; A review. Construction and Building Materials, Vol. 101, 2015, pp. 990–1005.
- Risdanareni, P., A. Hilmi, and P. B. Susanto. The effect of foaming agent doses on lightweight geopolymer concrete metakaolin based. AIP Conference Proceedings, Vol. 1842, 2017, id. 020057.
- Ibrahim, W. M. W., K. Hussin, M. M. A. B. Abdullah, and A. A. Kadir. Geopolymer lightweight bricks manufactured from fly ash and foaming agent, Vol. 1835, 2017, id. 020048.
- Khan, Q. S., M. N. Sheikh, T. J. McCarthy, M. Robati, and M. Allen. Experimental investigation on foam concrete without and with recycled glass powder: A sustainable solution for future construction. Construction and Building Materials, Vol. 201, 2019, pp. 369–379.
- BS EN12350-6. Testing fresh concrete: Density, British Standards Institution, London, UK, 2009.
- Li, M., H. Tan, X. He, S. Jian, G. Li, J. Zhang, et al. Enhancement in compressive strength of foamed concrete by ultra-fine slag. Cement and Concrete Composites, Vol. 138, 2023, id. 104954.
- BS EN 196-3. Methods of testing cement. Determination of setting times and soundness, British Standards Institute, London, UK, 2016.
- BS EN 12350-6. Testing fresh concrete Density, British Standards Institute, London, UK, 2016.
- BS EN 12390-3. Testing hardened concrete. Compressive strength of test specimens, British Standards Institute, London, UK, 2011.
- BS EN 12390-5. Testing hardened concrete. Flexural strength of test specimens, British Standards Institute, London, UK, 2019.
- ASTM C469. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression, American Society for Testing and Materials, West Conshohocken, PA: ASTM International, 2002.
- BS EN 12390-6. Testing hardened concrete. Tensile splitting strength of test specimens, British Standards Institute, London, UK, 2009.
- BS EN 12504-4. Testing concrete in structures determination of ultrasonic pulse velocity, British Standards Institute, London, UK, 2021.
- Cabrera, J. and C. J. Lynsdale. A new gas permeameter for measuring the permeability of mortar and concrete. Magazine of Concrete Research, Vol. 40, No. 144, 1988, pp. 177–182.
- del Rey Castillo, E., N. Almesfer, O. Saggi, and J. M. Ingham. Light-weight concrete with artificial aggregate manufactured from plastic waste. Construction and Building Materials, Vol. 265, 2020, id. 120199.
- Faraj, R. H., H. F. Hama Ali, A. F. H. Sherwani, B. R. Hassan, and H. Karim. Use of recycled plastic in self-compacting concrete: A comprehensive review on fresh and mechanical properties. Journal of Building Engineering, Vol. 30, 2020, id. 101283.
- Bideci, A., Ö. S. Bideci, and A. Ashour. Mechanical and thermal properties of lightweight concrete produced with polyester-coated pumice aggregate. Construction and Building Materials, Vol. 394, 2023, id. 132204.
- Dao, D. V., H. B. Ly, H. T. Vu, T. T. Le, and B. T. Pham. Investigation and optimization of the C-ANN structure in predicting the compressive strength of foamed concrete. Materials (Basel), Vol. 13, No. 5, 2020, id. 1072.
- Ramamurthy, K., E. K. Kunhanandan Nambiar, and G. Indu Siva Ranjani. A classification of studies on properties of foam concrete. Cement and Concrete Composites, Vol. 31, No. 6, 2009, pp. 388–396.
- Chen, H., R. Qin, C. L. Chow, and D. Lau. Recycling thermoset plastic waste for manufacturing green cement mortar. Cement and Concrete Composites, Vol. 137, 2023, id. 104922.
- Panda, S., A. Nanda, and S. K. Panigrahi. Potential utilization of waste plastic in sustainable geopolymer concrete production: A review. Journal of Environmental Management, Vol. 366, 2024, id. 121705.
- Lim, S. M., M. He, G. Hao, T. C. A. Ng, and G. P. Ong. Recyclability potential of waste plastic-modified asphalt concrete with consideration to its environmental impact. Construction and Building Materials, Vol. 439, 2024, id. 137299.
- Gencel, O., O. Yavuz Bayraktar, G. Kaplan, O. Arslan, M. Nodehi, A. Benli, et al. Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties. Construction and Building Materials, Vol. 320, 2022, id. 126187.
- Selvi, M. T., A. Dasarathy, and S. P. Ilango. Mechanical properties on light weight aggregate concrete using high density polyethylene granules. Materials Today: Proceedings, Vol. 81, 2023, pp. 926–930.
- Mohammadinia, A., Y. C. Wong, A. Arulrajah, and S. Horpibulsuk. Strength evaluation of utilizing recycled plastic waste and recycled crushed glass in concrete footpaths. Construction and Building Materials, Vol. 197, 2019, pp. 489–496.
- Akbulut, Z. F., S. Guler, F. Osmanoğlu, M. R. Kıvanç, and M. Khan. Evaluating sustainable colored mortars reinforced with fly ash: A comprehensive study on physical and mechanical properties under high-temperature exposure. Buildings, Vol. 14, No. 2, 2024, id. 453.
- Haigh, R. The mechanical behaviour of waste plastic milk bottle fibres with surface modification using silica fume to supplement 10% cement in concrete materials. Construction and Building Materials, Vol. 416, 2024, id. 135215.
- Kuzielová, E., L. Pach, and M. Palou. Effect of activated foaming agent on the foam concrete properties. Construction and Building Materials, Vol. 125, 2016, pp. 998–1004.
- Chao, Z., H. Wang, S. Hu, M. Wang, S. Xu, and W. Zhang. Permeability and porosity of light-weight concrete with plastic waste aggregate: Experimental study and machine learning modelling. Construction and Building Materials, Vol. 411, 2024, id. 134465.
- Sithole, N. T., N. T. Tsotetsi, T. Mashifana, and M. Sillanpää. Alternative cleaner production of sustainable concrete from waste foundry sand and slag. Journal of Cleaner Production, Vol. 336, 2022, id. 130399.
- Hashemi, M. J., M. Jamshidi, and J. H. Aghdam. Investigating fracture mechanics and flexural properties of unsaturated polyester polymer concrete (UP-PC). Construction and Building Materials, Vol. 163, 2018, pp. 767–775.
- Hasheminezhad, A., A. Farina, B. Yang, H. Ceylan, S. Kim, E. Tutumluer, et al. The utilization of recycled plastics in the transportation infrastructure systems: A comprehensive review. Construction and Building Materials, Vol. 411, 2024, id. 134448.
- Martins, M. A. B., L. R. R. Silva, B. H. B. Kuffner, R. M. Barros, and M. L. N. M. Melo. Behavior of high strength self-compacting concrete with marble/granite processing waste and waste foundry exhaust sand, subjected to chemical attacks. Construction and Building Materials, Vol. 323, 2022, id. 126492.
- Sunita. Effect of biomass ash, foundry sand and recycled concrete aggregate over the strength aspects of the concrete. Materials Today: Proceedings, Vol. 50, 2022, pp. 2044–2051.
- Sharma, D., N. Moondra, R. K. Bharatee, A. Nema, K. Sweta, M. K. Yadav, et al. Processing and recycling of plastic wastes for sustainable material management. Plastic Waste Management: Methods and Applications, Vol. 89, 2024, pp. 89–116.
- Ferdous, W., A. Manalo, H. S. Wong, R. Abousnina, O. S. AlAjarmeh, Y. Zhuge, et al. Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects. Construction and Building Materials, Vol. 232, 2020, id. 117229.
- Heidarnezhad, F., K. Jafari, and T. Ozbakkaloglu. Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete. Construction and Building Materials, Vol. 260, 2020, id. 119853.
- Ghosh, R., S. P. Sagar, A. Kumar, S. K. Gupta, and S. Kumar. Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser. Journal of Building Engineering, Vol. 16, 2018, pp. 39–44.
- Maglad, A. M., M. A. O. Mydin, S. S. Majeed, B. A. Tayeh, and S. A. Mostafa. Development of eco-friendly foamed concrete with waste glass sheet powder for mechanical, thermal, and durability properties enhancement. Journal of Building Engineering, Vol. 80, 2023, id. 107974.
- Lu, Z., L. Su, G. Xian, B. Lu, and J. Xie. Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment. Composite Structures, Vol. 234, 2020, id. 111650.
- Yang, L., C. Shi, and Z. Wu. Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete – A review. Composites Part B: Engineering, Vol. 178, 2019, id. 107456.
- Maghfouri, M., V. Alimohammadi, R. Gupta, M. Saberian, P. Azarsa, M. Hashemi, et al. Drying shrinkage properties of expanded polystyrene (EPS) lightweight aggregate concrete: A review. Case Studies in Construction Materials, Vol. 16, 2022, id. e00919.
- Mosaberpanah, M. A., O. Eren, and A. R. Tarassoly. The effect of nano-silica and waste glass powder on mechanical, rheological, and shrinkage properties of UHPC using response surface methodology. Journal of Materials Research and Technology, Vol. 8, No. 1, 2019, pp. 804–811.
- Hisseine, O. A., N. A. Soliman, B. Tolnai, and A. Tagnit-Hamou. Nano-engineered ultra-high performance concrete for controlled autogenous shrinkage using nanocellulose. Cement and Concrete Research, Vol. 137, 2020, id. 106217.
- Akinyemi, B. A. and T. E. Omoniyi. Repair and strengthening of bamboo reinforced acrylic polymer modified square concrete columns using ferrocement jackets. Scientific African, Vol. 8, 2020, id. e00378.
- Ahmed, S. and M. Ali. Use of agriculture waste as short discrete fibers and glass-fiber-reinforced-polymer rebars in concrete walls for enhancing impact resistance. Journal of Cleaner Production, Vol. 268, 2020, id. 122211.
- Liu, M. Y. J., U. J. Alengaram, M. Z. Jumaat, and K. H. Mo. Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete. Energy and Buildings, Vol. 72, 2014, pp. 238–245.
- Colangelo, F., G. Roviello, L. Ricciotti, V. Ferrándiz-Mas, F. Messina, C. Ferone, et al. Mechanical and thermal properties of lightweight geopolymer composites. Cement and Concrete Composites, Vol. 86, 2018, pp. 266–272.
- Ahmad, J., A. Majdi, A. Babeker Elhag, A. F. Deifalla, M. Soomro, H. F. Isleem, et al. A step towards sustainable concrete with substitution of plastic waste in concrete: Overview on mechanical, durability and microstructure analysis. Crystals, Vol. 12, No. 7, 2022, id. 944.
- Mostafa, S. A., I. S. Agwa, B. Elboshy, A. M. Zeyad, and A. M. Hassan. The effect of lightweight geopolymer concrete containing air agent on building envelope performance and internal thermal comfort. Case Studies in Construction Materials, Vol. 20, 2024, id. e03365.
- El Gamal, S., Y. Al-Jardani, M. S. Meddah, K. Abu Sohel, and A. Al-Saidy. Mechanical and thermal properties of lightweight concrete with recycled expanded polystyrene beads. European Journal of Environmental and Civil Engineering, Vol. 28, No. 1, 2024, pp. 80–94.
- Patil, A. R. and S. B. Sathe. Feasibility of sustainable construction materials for concrete paving blocks: A review on waste foundry sand and other materials. Materials Today: Proceedings, Vol. 43, 2021, pp. 1552–1561.
- Khan, M., J. Lao, M. R. Ahmad, and J.-G. Dai. Influence of high temperatures on the mechanical and microstructural properties of hybrid steel-basalt fibers based ultra-high-performance concrete (UHPC). Construction and Building Materials, Vol. 411, 2024, id. 134387.
- Panesar, D. K. Cellular concrete properties and the effect of synthetic and protein foaming agents. Construction and Building Materials, Vol. 44, 2013, pp. 575–584.
- Qaidi, S., H. M. Najm, S. M. Abed, H. U. Ahmed, H. Al Dughaishi, J. Al Lawati, et al. Fly ash-based geopolymer composites: A review of the compressive strength and microstructure analysis. Materials, Vol. 15, No. 20, 2022, id. 7098.