References
- 1. Anusavice KJ. Mechanical properties of dental materials. 'Phillips' science of dental materials'. 2003; 93 (11): 521-530.
- 2. Ritter JE. Critique of test methods for lifetime predictions. Dent Mater. 1995; 11(2): 147-51.10.1016/0109-5641(95)80051-4
- 3. Ritter JE. Predicting lifetimes of materials and material structures. Dent Mater. 1995; 11(2): 142-146.10.1016/0109-5641(95)80050-6
- 4. Fischer J, Stawarczyk B, Hammerle. CHF. Flexural strength of veneering ceramics for zirconia. Јournal of dentistry. 2008; 36 (5): 316 - 321.10.1016/j.jdent.2008.01.01718339469
- 5. Giordano R., L'Hherault R, Jackson M. Precision Flexural Strength of YPT Zirconia Sintered Using Conventional and Microwave Sintering. (Miami Beach Convention Center). 2009.
- 6. ANSI/ADA. Specification No. 69-1991. Revised American National Standard/American Dental Association Specification No. 69 DENTAL CERAMIC.
- 7. Stawarczyk B, Özcan M, Trottmann A, Hämmerle CHF, Roos M. Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics. J Mech Behav Biomed Mater. 2012; 10: 227-234.10.1016/j.jmbbm.2012.01.02022520434
- 8. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. Journal of Dental Research. 1990; 69 (12): 1791-1799.10.1177/002203459006901202012250083
- 9. Isgro G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. The Journal of Prosthetic Dentistry. 2003; 90: 465-473.10.1016/j.prosdent.2003.08.00314586311
- 10. Wagner WC, Chu TM (1996). Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics. The Journal of Prosthetic Dentistry. 1996; 76 (2): 140-144.
- 11. Ohyama T, Yoshinari M, Oda Y. Effects of cyclic loading on the strength of all-ceramic materials. The International Journal of Prosthodontics. 1999; 12 (1): 28-37.
- 12. Seal A, Dalui AK, Banerjee M, Mukhopadhyay AK, Phani KK. Mechanical properties of very thin cover slip glass disk. Bulletin of Materials Science. 2001; 24: 151.10.1007/BF02710092
- 13. Morrell R, McCormick NJ, Bevan J, Lodeiro M, Margetson J. Biaxial disc flexure-Modulus and strength testing. British Ceramic Transactions. 1999; 98: 234-240.10.1179/096797899680507
- 14. Fett T, Rizzi G. 3-balls-on-3-balls test on ceramic disks: a finite element study. Kalsruhe: Helmholtz- Gemeinschaft Deutscher Forschugszentrum, 2004. ISSN 0947-8620.
- 15. Shetty DK, Rosenfield AR, Bansal GK, Duckworth WH. Biaxial fracture studies of a glass-ceramic. Journal of the American Ceramic Society. 1981; 64 (1): 1-4.10.1111/j.1151-2916.1981.tb09548.x
- 16. Triwatana P, Srinuan P, Suputtamongkol K. Comparison of two fracture toughness testing methods using a glass-infiltrated and a zirconia dental ceramic. J Adv Prosthodont. 2013; 5: 36-43.10.4047/jap.2013.5.1.36359792423507882
- 17. Sridhar J. Wear of ceramics and enamel in a chewing simulator. PhD Thesis. The university of Аlabama at Birmingham USA, 2012: 92; 1518348.
- 18. Tinschert J, Natt G, Hassenpflug S, Spiekermann H. Status of current CAD-CAM technology in dental medicine. Int J Comput Dent. 2004; 7: 25-45.
- 19. Geis-Gerstorfer J, Fässler P. Untersuchungen zur Ermüdungsverhalten der Dentalkeramiken Zirkondioxid- TZP und In-Ceram. Dtsch Zahnarztl. 1999; 54: 692-694.