References
- 1. Balawender A.: Physical and mathematical model of losses in hydraulic motors. Developments in mechanical engineering, Gdansk University of Technology Publishers. Gdansk 2005.
- 2. Bing X., Junhui Z., Huayong Y., Bin Z.: Investigation on the Radial Micro-motion about Piston of Axial Piston Pump. Chinese Journal of Mechanical Engineering, Vol. 26, No. 2, 2013. DOI: 10.3901/CJME.2013.02.325.10.3901/CJME.2013.02.325
- 3. Deptula A., Osinski P., Partyka M..: Identification of influence of part tolerances of 3PWR-SE pump on its total efficiency taking into consideration multi-valued logic trees 60. Polish Maritime Research, 1(93)/2017, vol. 24. DOI: 10.1515/pomr-2017-000610.1515/pomr-2017-0006
- 4. Dymarski C., Dymarski P.: Developing Methodology for Model Tests of Floating Platforms in Low-Depth Towing Tank. Archives of Civil and Mechanical Engineering, No 1/2016, DOI: dx.doi.org/10.1016/j.acme.2015.07.00310.1016/j.acme.2015.07.003
- 5. Gao J., Huang W., Quan L., Huang J.: The distributed parameter model of hydraulic axial piston motor and its application in hydraulic excavator swing systems. Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering, April 2017. DOI: 10.1177/095965181770409810.1177/0959651817704098
- 6. Gelesz P., Karczewski A., Kozak J., Litwin W., Piatek L.: Design Methodology for Small Passenger Ships on the Example of the Ferryboat Motława 2 Driven by Hybrid Propulsion System. Polish Maritime Research, special issue S1 (93) 2017, vol. 24. DOI: 10.1515/pomr-2017-002310.1515/pomr-2017-0023
- 7. Guzowski A., Sobczyk A.: Reconstruction of hydrostatic drive and control system dedicated for small mobile platform. American Society of Mechanical Engineers, 2014. DOI: dx.doi.org/10.1115/FPNI2014-7862.10.1115/FPNI2014-7862
- 8. Jasinski R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part I). Polish Maritime Research, No 4/2008. DOI: 10.2478/v10012-007-0095-9.10.2478/v10012-007-0095-9
- 9. Jasinski R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part II). Polish Maritime Research, No 1/2009. DOI: 10.2478/v10012-008-0012-x.10.2478/v10012-008-0012-x
- 10. Jasinski R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part III). Methods of determining parameters for correct start-ups of hydraulic components and systems in low ambient temperatures. Polish Maritime Research, No 4/2009. DOI: 10.2478/v10012-008-0052-2.
- 11. Ke M., Ding F., Li B., Chen Z.: Exploration of the influence of backing pressure on the efficiency of hydraulic motor. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 37(10), October 2006.
- 12. Kollek W., Osinski P., Wawrzynska U.: The influence of gear micropump body asymmetry on stress distribution. Polish Maritime Research, 2(65)/2010. DOI: 10.1515/pomr-2017-0007.10.1515/pomr-2017-0007
- 13. Landvogt B., Osiecki L., Patrosz P., Zawistowski T., Zylinski B.: Numerical simulation of fluid-structure interaction in the design process for a new axial hydraulic pump. Progress in Computational Fluid Dynamics, Vol. 14, Issue 1, 2014. DOI:doi.org/10.1504/PCFD.2014.059198.10.1504/PCFD.2014.059198
- 14. Litwin W., Olszewski A.: Water-Lubricated Sintered Bronze. Journal Bearings - Theoretical and Experimental Research. Tribology Transactions, vol. 57, No 1/2014.
- 15. Lubinski J., Sliwinski P. Multi parameter sliding test result evaluation for the selection of material pair for wear resistant components of a hydraulic motor dedicated for use with environmentally friendly working fluids. Solid State Phenomena Vol. 225(2015). DOI: 10.4028/www.scientific.net/SSP.225.115.10.4028/www.scientific.net/SSP.225.115
- 16. Maczyszyn A.: Evaluation of losses in a hydraulic motor based on the SWSB - 63 motor tests. Polish Maritime Research, 4(17)/2010. DOI: 10.2478/v10012-010-0035-y.10.2478/v10012-010-0035-y
- 17. Maczyszyn A.: Method of Sum of Power Losses as a Way for Determining the ki Coefficients of Energy Losses in Hydraulic Motor. Polish Maritime Research, 2(23)/2016. DOI: 10.1515/pomr-2016-0021.10.1515/pomr-2016-0021
- 18. Osiecki L., Patrosz P., Landvogt B., Piechna J., Zawistowski T., Zylinski B.: Simulation of fluid structure interaction in a novel design of high pressure axial piston hydraulic pump. Archive of Mechanical Engineering. The Journal of Committee on Machine Building of Polish Academy of Sciences, Vol. 60, Issue 4, 2013. DOI: 10.2478/meceng-2013-0031.10.2478/meceng-2013-0031
- 19. Osiecki L., Patrosz P., Zawistowski T., Landvogt B., Piechna J., Zylinski B.: Compensation of pressure peaks in PWK type hydraulic pumps. Key engineering materials, Vol. 490, 2011. DOI: 10.4028/www.scientific.net/KEM.490.33.10.4028/www.scientific.net/KEM.490.33
- 20. Osinski P., Deptula A., Partyka M.: Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic trees. Archives of Civil and Mechanical Engineering, No 4/2013, DOI: 10.1016/j.acme.2013.05.001.
- 21. Paszota Z.: Energy losses in hydrostatic drive. LAP LAMBERT Academic Publishing, 2016.
- 22. Paszota Z.: Energy losses in the hydraulic rotational motor - definitions and relations for evaluation of the efficiency of motor and hydrostatic drive. Polish Maritime Research, 2(65)/2010. DOI: 10.2478/v10012-010-0017-0.10.2478/v10012-010-0017-0
- 23. Paszota Z.: Power of energy losses in hydrostatic drive system elements – definition, relationships, ranges of changes, energy efficiencies. Part 1 – hydraulic motor. Drives and Control, 11/2007, Poland.
- 24. Patrosz P.: Deformation in the axial clearance compensation node in the satellite pump unit. Hydraulics and Pneumatics 1/2014, Poland.
- 25. Pobedza J., Sobczyk A.: Properties of high pressure water hydraulic components with modern coatings. Advanced Materials Research. Trans Tech Publications Ltd, 849/2014. DOI: 10.4028/www.scientific.net/AMR.849.100.10.4028/www.scientific.net/AMR.849.100
- 26. Sliwinski P.: New satellite pumps. Key Engineering Materials, No 490/2012. DOI: 10.4028/www.scientific.net/KEM.490.195.10.4028/www.scientific.net/KEM.490.195
- 27. Sliwinski P.: The basics of design and experimental tests of the commutation unit of a hydraulic satellite motor. Archives of Civil and Mechanical Engineering, No 16/2016, DOI: 10.1016/j.acme.2016.04.003.10.1016/j.acme.2016.04.003
- 28. Sliwinski P.: The flow of liquid in flat gaps of satellite motors working mechanism. Polish Maritime Research 2/2014. DOI: 10.2478/pomr-2014-0019.10.2478/pomr-2014-0019
- 29. Sliwinski P.: The influence of water and mineral oil on volumetric losses in a hydraulic motor. Polish Maritime Research, special issue S1 (93) 2017, vol. 24. DOI: 10.1515/pomr-2017-0041.10.1515/pomr-2017-0041
- 30. Walczak P., Sobczyk A.: Simulation of water hydraulic control system of Francis turbine. American Society of Mechanical Engineers, 2014. doi: dx.doi.org/10.1115/FPNI2014-7814.10.1115/FPNI2014-7814
- 31. Wu D., Burton R., Schoenau G., Bitner D.: Modeling of orifice flow rate at very small openings. International Journal of Fluid Power, vol. 4, No. 1, April 2003.
- 32. Wu D., Burton R., Schoenau G.: An empirical discharge coefficient model for orifice flow. International Journal of Fluid Power, vol. 3, No. 3, December 2002.
- 33. Xiaogang Z., Long Q., Yang Y., Chengbin W., Liwei Y.: Output Characteristics of a Series Three-port Axial Piston Pump. Chinese Journal of Mechanical Engineering, Vol. 25, No. 3, 2012. DOI: 10.3901/CJME.2012.03.498.10.3901/CJME.2012.03.498
- 34. Yu H., Luo C., Wang H.: Performances of a Balanced Hydraulic Motor with Planetary Gear Train. Chinese Journal of Mechanical Engineering, Vol. 25, No. 4, 2012. DOI: 10.3901/CJME.2012.04.760.10.3901/CJME.2012.04.760
- 35. Zloto T., Nagorka A.: An efficient FEM for pressure analysis of oil film in a piston pump. Applied Mathematics and Mechanics, vol. 30, No 1/2009.