References
- 1. Alexander O. Pugachev a, Yury A. Ravikovich b, Leonid A. Savin., Flow structure in a short chamber of a labyrinth seal with a backward-facing step, Elsevier, Computers & Fluids, 114, pp. 39-47, 2015
- 2. Anker J. E., Mayer J. F., Stetter H., Computational Study of the Flow in an Axial Turbine with Emphasis on the Interaction of Labyrinth Seal Leakage Flow and Main Flow, E. Krause et al. (eds.), High Performance Computing in Science and Engineering 2001, Springer-Verlag Berlin Heidelberg, 2002.
- 3. Anker J. E., Mayer J. F., Casey M., The impact of rotor labyrinth seal leakage flow on the loss generation in an axial turbine, Proceedings of the Institution of Mechanical Engineers, Vol. 219, Part A, Journal Power and Energy, 2005
- 4. Hodkinson B., Estimation of the leakage through a labyrinth gland, Proceedings of the institution of Mechanical Engineers 141, 1939
- 5. Hu D., Jia L., Yang L., Dimensional Analysis on Resistance Characteristics of Labyrinth Seals, Journal of Thermal Science, Vol.23, No.6, pp. 516-522, 2014
- 6. Joachimiak D., Krzyślak P., Comparison of results of experimental research with numerical calculations of a model one-sided seal, Archives of Thermodynamics, Vol. 36, No. 2, pp. 61-74, 2015
- 7. Joachimiak D.: The labyrinth seals research with extraction. PhD thesis, Poznan University of Technology, Poznan 2013 (in Polish).
- 8. Krzyślak P., Winowiecki M., A method of diagnosing labyrinth seals in fluid-flow machines, Polish Maritime Research 3(57), 15, pp. 38-41, 2008
- 9. Li J., Wen K., Wang S., Jiang S., Kong X., Experimental and numerical investigations on the leakage flow characteristics of labyrinth seals, Heat Mass Transfer and Energy Conversion AIP Conf. Proc. 1547, pp. 164-172, 2013
- 10. Stępień R., Kosowski K., Remarks on aerodynamic forces in seals of turbine stages, Polish Maritime Research, Special issue 2009/S1; pp. 58-63
- 11. Stępień R., Kosowski K., Piwowarski M., Badur J.: Numerical and Experimental Investigations into Pressure Field in Blade Shroud Clearance, Part II: Numerical Analysis, Task Quarterly, 2003
- 12. Thiekle G., Stetter H.; Identification of friction factors for modelling the exciting forces caused by flow in labyrinth seals, Rotordynamics ‘92, Springer-Verlag London, 1992
- 13. Tong Seop Kim, and Kyu Sang Cha, Comparative analysis of the influence of labyrinth seal configuration on leakage behavior, Journal of Mechanical Science and Technology, pp. 2830-2838, 2009
- 14. Traupel W. Termische turbomaschinen, Ester B., Springer 2001
- 15. Wan-Fu Zhang a, Jian-Gang Yang b, Chun Li a, Yong-Wei Tian, Comparison of leakage performance and fluidinduced force of turbine tip labyrinth seal and a new kind of radial annular seal, Computers & Fluids, 105, pp. 125-137, 2014
- 16. Trütnovsky K., Berührungsfreie Dichtungen, Grundlagen und Anwendungen der Strömung durch Spalte und Labyrinthe, VDI-Verlag bh Düsseldorf, Verlag des Vereins Deutscher Ingenieure 1964.
- 17. Winowiecki M., The method of diagnosing labyrinth seals flow machines. PhD thesis, Poznan University of Technology, Poznan 2009 (in Polish)
- 18. Yamada, Y., On the pressure loss of flow between rotating co-axial cylinders with rectangular grooves, Bulletin of the JSME, 5 (20), pp 642-651. 1962
- 19. Zimmerman H. and Wolff, K. H., 1987, “Comparison between Empirical and Numerical Labyrinth Flow Correlations,” ASME 87-GT-86.
- 20. ANSYS. ANSYS CFX-solver theory guide. ANSYS, Inc., Release 14.5; 2012