References
- 1. [1] Paik, J.K., Thayamballi, A.K. : Ultimate limit state design of steel-plated structures. Chichester, UK: John Wiley & Sons Ltd; 2003.
- 2. Smith, C.S. :. Influence of local compressive failure on ultimate longitudinal strength of a ship’s hull. PRADSInternational Symposium on Practical Design in Ship Building, Tokyo-Japan, (1977), pp. 73-79.
- 3. URL-1: http://www.vesselfinder.com/news/1223-UPDATE-MOL-Comfort-Sank, 2013.
- 4. Ueda, Y., Rashed, S.M.H. : ISUM (Idealized Structural Unit Method) Applied to Marine Structures. Transactions of JWRI, Vol. 20 (1991), No.1, pp.123-136.
- 5. Dow, R.S., 1991. Testing and Analysis of a 1/3 Scale Welded Steel Frigate Model, Proc. Int. Conf. on Advances in Marine Structures, ARE, 749-773.
- 6. Paik, J.K., Mansour, A. A. : Simple formulation for predicting the ultimate strength of ships. Journal of Marine Science Technology, Vol. 1 (1995), pp. 52-62.
- 7. Ozguc, O. : Hull girder ultimate strength and fracture toughness of damaged marine structures. PhD Thesis, Universities of Glasgow and Strathclyde, Glasgow, 2006.
- 8. Benson S. : Progressive collapse assessment of lightweight ship structures. PhD Thesis, Newcastle University, Newcastle, 2011.
- 9. Tayyar, G.T. : Determination of ultimate strength of the ship girder. PhD Thesis, İstanbul Technical University, İstanbul, 2011.
- 10. Olmez, H. : Ultimate strength estimation of ship hull girders by progressive collapse analysis approach. PhD Thesis, Karadeniz Technical University, Trabzon, 2014.
- 11. Paik, J.K., Wang, G., Kim, B.J., Thayamballi, A.K. : Ultimate limit state design of ship hulls. SNAME Transactions, Vol. 110 (2002), pp. 85-114.
- 12. Andric, J., Kitarovic, S., Bicak, M. : IACS incrementaliterative method in progressive collapse analysis of various hull girder structures. Brodogradnja/Shıpbuıldıng, Vol. 65 (2014), No. 1, pp. 65-78.
- 13. Kim, D.K., Park, D.H., Kim, H.B., Kim, B.J., Seo, J.K., Paik, J.K. : Lateral pressure effects on the progressive hull collapse behaviour of a Suezmax-class tanker under vertical bending moments. Ocean Engineering, Vol. 63 (2013), pp. 112-121.
- 14. Benson, S., Downes, J., Dow, R.S. : Compartment level progressive collapse analysis of lightweight ship structures. Marine Structures, Vol.31 (2013), pp.44-62.
- 15. Rutherford, S.E., Caldwell, J.B. : Ultimate strength of ships: a case study. Trans Soc. Nav. Archit. Mar Eng., Vol. 98 (1990), pp. 441-471.
- 16. von Karman, T., Sechler, E.E. ve Donnell, L.H. : Strength of thin plates in compression. ASME Trans, Vol. 54 (1932), pp. 553-557.
- 17. Marguerre, K.. : Zur theorie der gekrummmter platte grosser formanderung Proc. 5th Int. Congress Appl. Mech., Vol. 93 (1938).
- 18. Murray, N.W., Introduction to the theory of thin-walled structures. Clarendon Press, Oxford, 1984.
- 19. Smith, C. S. : Compressive strength of welded steel ship grillages. Transactions of the Royal Institution of Naval Architects, Vol. 118 (1976), pp. 325-359.
- 20. Paik J.K., Thayamballi A.K., Kim B.J.: Large deflection orthotropic plate approach to develop ultimate strength equations for stiffened panels under combined biaxial compression/tension and lateral pressure. Thin-Wall Structures, Vol. 39 (2001), No.3, pp. 215-246.
- 21. Hughes, O. and Paik, J. K. : Ship structural analysis and design. SNAME, New Jersey, 2010.
- 22. IACS, Common structural rules for double hull oil tankers. International Association of Classification Societies, 2012.
- 23. Technical Committee VI.2 : Ultimate Hull Girder Strength. Proceedings of the 14th International Ship and Offshore Structures Congress, Vol.2 (2000), Nagasaki.
- 24. Technical Committee III.1. Ultimate strength, Proceedings of the 18th International Ship and Offshore Structures Congress, Vol.1 (2012), Rostock.