Have a personal or library account? Click to login
Numerical Investigation of the Undrained Compression and Pull-Out Capacity of Suction Foundations in Clay Cover

Numerical Investigation of the Undrained Compression and Pull-Out Capacity of Suction Foundations in Clay

Open Access
|Oct 2015

Abstract

This paper presents the results of three-dimensional finite difference analysis of suction foundations in uniform and non-uniform clays under undrained conditions. The Tresca criterion was used to simulate the stress-strain response. The bearing capacity of the foundations was investigated, with the degree of nonhomogeneity (kD/sum) of soil varying from 0 to 5, and the embedment depth being up to four times the foundation diameter. The end bearing capacity factor in compression and the reverse bearing capacity factor in tension were both calculated and were compared with each other under different foundation displacements. Numerical results showed that the ultimate bearing capacity factor can have the same value in cases of both compression and tension. The recommended ultimate bearing capacity factor is determined on the basis of the embedment ratio and displacement magnitude, and the displacement is not more than 30% of the foundation diameter. Finally, two equations are proposed to evaluate both the bearing capacity factor and the effective depth factor.

DOI: https://doi.org/10.1515/pomr-2015-0044 | Journal eISSN: 2083-7429 | Journal ISSN: 1233-2585
Language: English
Page range: 126 - 135
Published on: Oct 15, 2015
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year

© 2015 Jiaqing Du, Shouji Du, Shuilong Shen, Zhenyu Yin, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.