References
- 1. Chakrabarti, S. Empirical calculation of roll damping of ships and barges, Ocean Engineering, Vol. 28, pp. 915-932, 2001.10.1016/S0029-8018(00)00036-6
- 2. Cueva, M, Hansen, AS, Silva, JLB, Faria, F, Morato, A. HYDRODYNAMICS OF AN INSTALATION BARGE WITH BILGE KEELS AND STINGER, 29th ASME International Conference on Ocean, Offshore and Arctic Engineering, Shanghai, PEOPLES R CHINA, JUN 06-11, 2010.10.1115/OMAE2010-20059
- 3. D. Mylonas, P. Sayer. The hydrodynamic flow around a yacht keel based on LES and DES, Ocean Engineering, Vol. 46, pp. 18-32, 2012.10.1016/j.oceaneng.2012.02.001
- 4. Dai, CM, Miller, RW, Percival, AS. HYDRODYNAMIC EFFECTS OF BILGE KEELS ON THE HULL FLOW DURING STEADY TURNS, OMAE, Vol. 5, pp. 571-580, 2009.10.1115/OMAE2009-79585
- 5. E.P. Bangun, C.M. Wang, T. Utsunomiya. Hydrodynamic forces on a rolling barge with bilge keels, Applied Ocean Research, Vol. 32, pp. 219-232, 2010.10.1016/j.apor.2009.10.008
- 6. Froude, W. On the Rolling of Ships, Ph.D. thesis, Royal Institute of Naval Architects, 1861.
- 7. H.H. Chun, S.H. Chun, S.Y. Kim. Roll damping characteristics of a small fishing vessel with a central wing, Ocean Engineering, Vol. 28, pp. 1601-1619, 2001.
- 8. IKEDA Y., HIMENO Y, TANAKA N. On eddy making component of roll damping force on naked hull, Journal of the Society of Naval Architects of Japan, Vol. 142, pp. 54-64, 1977.10.2534/jjasnaoe1968.1977.142_54
- 9. ITTC QM Procedure (2002). 7.5- 03- 01- 01.
- 10. ITTC QM Procedure (2002). 7.5- 03- 02- 01.
- 11. Kinnas, S. A., Yu, Y. H., Kacham, B., Lee, H. A Model of the Flow Around Bilge Keels of FPSO Hull Sections Subject to Roll Motions, Proceedings of the 12th Offshore Symposium, Soc. Naval Arch. Mar. Engr.. Houston TX., 2003.
- 12. Kinnas, S. A. FPSO Roll Motions, Technical Report, Minerals Mgt. Service, USA, 2005.
- 13. Kwang Hyo Jung, Kuang-An Chang, Erick T. Huang. Twodimensional flow characteristics of wave interactions with a free-rolling rectangular structure, Ocean Engineering, Vol. 32, pp. 1-20, 2005.10.1016/j.oceaneng.2004.06.007
- 14. LI Yi-le, LIU Ying-zhong, MIAO Guo-ping. Potential flow solution using higher order boundary element method with Rankine source, Journal of Hydrodynamics(Ser. A), Vol. 14, no 1, pp. 80-89, 1999.
- 15. LUO Min-li, MAO Xiao-fei, WANG Xiao-xia. CFD based hydrodynamic coefficients calculation to forced motion of two-dimensional section, CHINESE JOURNAL OF HYDRODYNAMICS, Vol. 26, no. 4, pp. 509-515, 2011.
- 16. M. Eissa, A.F. El-Bassiouny. Analytical and numerical solutions of a non-linear ship rolling motion, Applied Mathematics and Computation, Vol. 134, pp. 243-270, 2003.10.1016/S0096-3003(01)00279-X
- 17. Maimun, A. Priyanto, K.S. Wong, M. Pauzi, M. Rafiqul. Effects of side keels on patrol vessel safety in astern waves, Ocean Engineering 2009; 36: 277-284.
- 18. Pablo M. Carrica, Hamid Sadat-Hosseini, Frederick Stern. CFD analysis of broaching for a model surface combatant with explicit simulation of moving rudders and rotating propellers, Computers & Fluids, Vol. 53, pp. 117-132, 2012.10.1016/j.compfluid.2011.10.002
- 19. PU Jin-yun, ZHANG Wei-kang, JIN Tao. Melinikov’s method for non-liner rolling motions of a flooded ship, Journal of Hydrodynamics(Ser. B), Vol. 17, no. 5, pp. 580-584, 2005.
- 20. Qiuxin Gao, DracosVassalos. Numerical study of damage ship hydrodynamics, Ocean Engineering, Vol. 55, pp. 199-205, 2012.10.1016/j.oceaneng.2012.08.003
- 21. Robert V. Wilson, Pablo M. Carrica, Fred Stern. Unsteady RANS method for ship motions with application to roll for a surface combatant, Computers & Fluids, Vol. 35, pp. 501-524, 2006.10.1016/j.compfluid.2004.12.005
- 22. Souza Jr., J.R., Fernandes, A.C., Masetti, I.Q., da Silva, S., Kroff, S.A.B.. Nonlinear rolling of an FPSO with largerthan- usual bilge keels, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, Lisbon, Portugal; July 5, 1998 - July 9, 1998.
- 23. Stern F, Wilson R, Coleman H, Paterson E. Comprehensive approach to verification and validation of CFD simulations-Part 1: Methodology and procedures, ASME J Fluids Eng., Vol. 123, pp. 793-802, 2001.10.1115/1.1412235
- 24. Tanaka, N., Hishida, T. A Study on the Bilge Keels. Part 1. Two Dimensional Model Experiments, J. Soc. Nav. Archit. Jpn., Vol. 101, pp. 99-105, 1957.10.2534/jjasnaoe1952.1957.99
- 25. Tanaka, N. A Study on the Bilge Keels. Part 2. Full Sized Model Experiment, J. Soc. Nav. Archit. Jpn., Vol. 103, pp. 69-73, 1958.10.2534/jjasnaoe1952.1958.69
- 26. Tanaka, N. A Study on the Bilge Keels. Part 3. The Effect of the Ship Form and the Bilge Keel Size on the Action of the Bilge Keel, J. Soc. Nav. Archit. Jpn., Vol. 105, pp. 27-32, 1959.10.2534/jjasnaoe1952.1959.27
- 27. Tanaka, N. A Study on the Bilge Keels. Part 4. On the Eddy making Resistance to the Rolling of a Ship Hull, J. Soc. Nav. Archit. Jpn., Vol. 109, pp. 205-212, 1960.10.2534/jjasnaoe1952.1961.205
- 28. Thiagarajan, Krish P., Braddock, Ellen C. Influence of Bilge Keel Width on the Roll Damping of FPSO, 24th International Conference on Offshore Mechanics and Arctic Engineering, Halkidiki, GREECE; JUN 12-17, 2005.
- 29. Vaidhyanathan, M. Separated Flows Near a Free Surface. Ph.D. thesis, University of California, Berkeley, CA., 1993.
- 30. Wilson R, Stern F, Coleman H, Paterson E. Comprehensive approach to verification and validation of CFD simulations-Part 2: Application for RANS simulation of a cargo/container ship, ASME J Fluids Eng., Vol. 123, pp. 803-810, 2001.10.1115/1.1412236
- 31. Wilson R, Shao J, Stern F. Discussion: Criticisms of the correction factor verification method, ASME J Fluids Eng., Vol. 125, pp. 732-733, 2003.10.1115/1.1588693
- 32. YANG Bo, WANG Zuo-chao, WU Ming. Numerical Simulation of Naval Ship’s Roll Damping Based on CFD, Procedia Engineering, Vol. 37,pp. 14-18, 2012.10.1016/j.proeng.2012.04.194
- 33. YANG Chun-lei, ZHU Ren-chuan, MIAO Guo-ping, FAN Ju. Numerical simulation of rolling for 3-D ship with forward speed and nonlinear damping analysis, Journal of Hydrodynamics(Ser. B), Vol. 25, no. 1, pp. 148-155, 2013.10.1016/S1001-6058(13)60348-0
- 34. Yeung, R.W., Liao, S.-W., Roddier, D. Hydrodynamic coefficients of rolling rectangular cylinders, Eighth International Journal of Offshore and Polar Engineers, Vol. 8, pp. 242-250, 1998.
- 35. Yeung, R., Roddier, D., Alessandrini, B., Gentaz, L., and Liao, S.-W. On Roll Hydrodynamics of Cylinders Fitted With Bilge Keels, Proceedings 23rd Symposium Naval Hydrodynamics, Washington, DC., 2000.