References
- 1. Huber, F. W., Johnson, P. D., Sharma, O. P., Staubach, J. B., Gaddis, S. W., 1996, “Performance Improvement Through Indexing of Turbine Airfoils. Part 1: Experimental Investigation”, ASME J. Turbomach., Vol. 118, pp. 630–635.10.1115/1.2840918
- 2. Griffin L. W., Huber F. W., Sharma O. P., 1996, “Performance Improvement Through Indexing of Turbine Airfoils. Part 2: Numerical Simulation”. ASME J. Turbomach., Vol. 118, pp. 636–64210.1115/1.2840919
- 3. Eulitz, F., Engel, K., Gebbing, H., 1996, “Numerical Investigation of the Clocking Effects in a Multistage Turbine,” ASME Paper 96-GT-26, 199610.1115/96-GT-026
- 4. Dorney, D., Sharma, O. P.,1996, “A Study of Turbine Performance Increases Through Airfoil Clocking,” AIAA Paper 96-2816, 199610.2514/6.1996-2816
- 5. Cizmas P.G.A., Dorney D., 2000, “The Influence of Clocking on Unsteady Forces of Compressor and Turbine Blades”, International Journal of Turbo and Jet Engines, Vol. 17, No. 2, pp. 133-14210.1515/TJJ.2000.17.2.133
- 6. Dorney, D. J., Croft, R. R., Sondak, D. L., Stang, U. E., Twardochleb, C. Z., 2001, “Computational study of clocking and embedded stage in a 4-stage industrial turbine”, ASME Paper 2001-GT-50910.1115/2001-GT-0509
- 7. Reinmoller U., Stephan B., Schmidt S., Niehuis R., 2002, “Clocking Effects in a 1.5 Stage Axial Turbine – Steady and Unsteady Experimental Investigations Supported by Numerical Simulations”, ASME Journal of Turbomachinery, Vol. 124, No. 1, pp. 52-6010.1115/1.1425811
- 8. Cizmas P.G.A., Dorney D., 1999, “Parallel Computation of Turbine Blade Clocking”, International Journal of Turbo and Jet Engines. Vol. 16, No. 1, pp. 49–6010.1515/TJJ.1999.16.1.49
- 9. Li Wei, Zhu Xiao-cheng, Ouyang Hua, Du Zhao-hui, 2012, “Numerical Simulation of Clocking Effect on Blade Unsteady Aerodynamic Force in Axial Turbine”, Journal of Thermal Science, Vol. 21, No. 5, pp 474-48210.1007/s11630-012-0571-0
- 10. Arnone A., Marconcini M., Pacciani R., 2000, “On the Use of Unsteady Methods in Predicting Stage Aerodynamics Performance”, Proc International Symposium on Unsteady Aerodynamics, Aeroacoustics, and Aeroelasticity of Turbomachines ISUAAAT, Lyon, France, pp.24-36
- 11. Arnone A., Marconcini M., Pacciani R., Schipani C., Spano E., 2002, “Numerical Investigation of Airfoil Clocking in a Three-Stage Low-Pressure Turbine”, Journal of Turbomachinery, Vol. 124, pp 61-6810.1115/1.1425810
- 12. Arnone, A., Marconcini, M., Greco, A., Spano, E., 2004, “Numerical Investigation of Three-Dimensional Clocking Effects in a Low Pressure Turbine”, ASME Journal of Turbomachinery, Vol. 126, pp. 375-38410.1115/1.1740780
- 13. Meyer, R. X., 1958, “The Effect of Wakes on the Transient Pressure and Velocity Distributions in Turbomachines,” ASME Journal of Basic Engineering, Vol. 80, pp. 1544-155210.1115/1.4012797
- 14. Smith, L. H., 1966, “Wake Dispersion in Turbomachines,” ASME Journal of Basic Engineering, Vol. 88, September, pp. 688-69010.1115/1.3645942
- 15. Lienhart, W., 1974, “Berechnung der instationären Strömung durch gegeneinander bewegte Schaufelgitter und der Schaufelkraftschwankungen”, VDI-Forschungsheft, 562, VDI Verlag, Düsseldorf
- 16. Krammer, P., 1982, “Computation of Unsteady Blade Forces in Turbomachines by Means of Potential Flow Theory and by Simulating Viscous Wakes”, ASME Paper 82-GT-19810.1115/82-GT-198
- 17. Sieverding, C. H., Heinemann, H., 1990, “The Influence of Boundary Layer State on Vortex Shedding From Flat Plates and Turbine Cascades”, ASME Journal of Turbomachinery, vol. 112, pp. 181-18710.1115/1.2927631
- 18. Cicatelli, G., Sieverding, C. H., 1997, “The Effect of Vortex Shedding on the Unsteady Pressure Distribution Around the Trailing Edge of a Turbine Blade,” ASME Journal of Turbomachinery, Vol. 119, pp. 810-81910.1115/1.2841192
- 19. Mensink, C., 1996, “Numerical Prediction of Periodic Vortex Shedding in Subsonic and Transonic Turbine Cascade Flows”, International Journal for Numerical Methods in Fluids, Vol. 22, pp. 881-89710.1002/(SICI)1097-0363(19960515)22:9<881::AID-FLD384>3.0.CO;2-C
- 20. Currie, T. C., Carscallen, W. E., 1998, “Simulation of Trailing Edge Vortex Shedding in a Transonic Turbine Cascade,” ASME Journal of Turbomachinery, Vol. 120, pp. 10-1910.1115/1.2841371
- 21. Arnone, A., Marconcini, M., Pacciani, R., 1999, “On the Use of Dual Time Stepping in Unsteady Turbomachinery Flow Calculations,” ERCOFTAC Bulletin No. 42, September, pp. 37-42
- 22. Magagnato, F., 1999, “Unsteady flow past a turbine blade using non-linear two-equation turbulence models,” Proceedings III European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, London, March, pp. 221-230
- 23. Kost, F., Hummel, F., Tiedemann, M., 2000, “Investigation of the Unsteady Rotor Flow Field in a Single HP Turbine Stage,” Proceedings ASME TURBO EXPO 2000, May 8-11, Munich, Germany, Paper 200-GT-432, pp. 1-1110.1115/2000-GT-0432
- 24. Tiedemann M., Kost F., 2001, “Some aspects of Wake-Wake Interactions Regarding Turbine Stator Clocking”, ASME J. Turbomachinery, Vol. 123, pp.526-53310.1115/1.1370158
- 25. Hummel, F.,2001, “Wake-Wake Interactions and Its Potential for Clocking in Transonic High Pressure Turbine,” Proceedings ASME TURBO EXPO 2001, June 4-7, New Orleans, U.S.A, Paper 2001-GT-0302, pp. 1-910.1115/2001-GT-0302
- 26. Swirydczuk J., 2002, “Vortex Dynamics of the Stator Wake-Rotor Cascade Interaction”, ASME J. Fluids Engineering, Vol. 124, pp. 400-41210.1115/1.1467597
- 27. Swirydczuk J., 2013, “Wake-blade interaction in steam turbine stages”, Polish Maritime Research, Vol. 20, No. 2 (78), pp. 30-4010.2478/pomr-2013-0014
- 28. Krysinski J.E., Blaszczak J. R., Smolny A., 2005, “Stator Clocking Effects on 3D Flow in a Two-Stage Low-Pressure Turbine”, Proc ASME TURBO EXPO 2005, Power for Land, Sea and Air, June 6-9, 2005, Reno-Tahoe, Nevada, USA, Paper GT2005-68811, pp. 1-1210.1115/GT2005-68811