References
- [1] Williams, B.: Powder Metall. Review, vol. 5, 2016, no. 4, p. 47
- [2] Silbereisen, H.: Powder Metall. Int., vol. 16, 1984, no. 2, p. 65
- [3] Whittaker, D.: Powder Metall. Review, vol. 4, 2015, no. 2, p. 35
- [4] Brookes, KJA.: Hardmetals and other Hard Materials. 2nd ed. East Barnet UK : Int. Carbide Data, 1992
- [5] Schubert, WD., Lassner, E., Boehlke, W.: Cemented carbides – a success story. London : International Tungsten Industries Association, 2010
- [6] Danninger, H., De Oro Calderon, R., Gierl-Mayer, C. In: Ullmann’s Encyclopedia of Industrial Chemistry. Wiley-VCH, Online 2017, p. 1
- [7] Kotthoff, G., Leupold, B., Janzen, V. In: Pulvermetallurgie in Wissenschaft und Praxis. Vol. 33. Eds. H. Kolaska, H. Danninger, B. Kieback. Hagen : Fachverband Pulvermetallurgie, 2017, p. 185
- [8] Flodin, A.: Powder Metall. Review, vol. 6, 2017, no. 2, p. 41
- [9] Dlapka, M., Müller, A. In: Pulvermetallurgie in Wissenschaft und Praxis. Vol. 33. Eds. H. Kolaska, H. Danninger, B. Kieback. Hagen : Fachverband Pulvermetallurgie, 2017, p. 207
- [10] Danninger, H., Gierl, C.: Sci. Sintering, vol. 40, 2008, no. 1, p. 33
- [11] De Oro Calderon, R., Gierl-Mayer, C., Danninger, H.: Journal of Thermal Analysis and Calorimetry, vol. 127, 2017, no. 1, p. 91
- [12] Gierl-Mayer, C., De Oro Calderon, R., Danninger, H.: JOM, vol. 68, 2016, no. 3, p. 920
- [13] De Oro Calderon, R., Gierl-Mayer, C., Danninger, H.: Powder Metallurgy, vol. 59, 2016, no. 1, p. 31
- [14] Jones, PK., Buckley-Golder, K., Sarafinchan, D.: Int. J. Powder Metallurgy, vol. 34, 1998, no. 1, p. 26
- [15] Dlapka, M., Gierl, C., Danninger, H., Altena, H., Stetina, G., Orth, P. In: Proceedings PM2010 Powder Metallurgy World Congress &Exhibition, Florence. Vol. 2. Shrewsbury : European Powder Metallurgy Association, 2010, p. 459
- [16] Mulin, H., Giraud, Y., Since, JJ.: Powder Metall. Review, vol. 3, 2014, no. 2, p. 61
- [17] Schubert, WD., Fugger, M., Wittmann, B., Useldinger, R.: Int. J. Refr. Metals &Hard Mater., vol. 49, 2015, p. 110
- [18] Schubert, WD.: Keramische Zeitschrift, 2015, no. 7, p. 365
- [19] Garcia, J. et al.: Adv. Eng. Mater., vol. 12, 2010, p. 929
- [20] Johnson, PK.: Int. J. Powder Metall., vol. 44, 2008, no. 4, p. 43
- [21] Leichtfried, G. In: Landolt-Börnstein New Series VIII/2A2 “Refractory, Hard and Intermetallic Materials”. Chapter 12. Berlin-Heidelberg : Springer, 2002, p. 1
- [22] Haydn, M., Ortner, K., Franco, T., Menzler, NH., Venskutonis, A., Sigl, LS.: Powder Metall., vol. 56, 2013, no. 5, p. 382
- [23] German, RM.: Adv. Powder Metall. &Partic. Mater. Part 4. Princeton NJ : MPIF, 2011
- [24] Johnson, PK.: Int. J. Powder Metall., vol. 52, 2016, no. 1, p. 5
- [25] Gierl, C. et al.: Powder Injection Moulding International, vol. 6, 2012, no. 4, p. 65
- [26] Schoppa, A., Delarbre, P. In: Pulvermetallurgie in Wissenschaft und Praxis. Vol. 29. Ed. H. Kolaska. Hagen : Fachverband Pulvermetallurgie, 2013, p. 231
- [27] Dougan, M.: Powder Metall. Review, vol. 4, 2015, no. 3, p. 41
- [28] Schoppa, A., Delabre, P., Holzmann, E., Silg, M. In: Proc. IEEE EDPC Conf. Nuremberg, 2013
- [29] Narasimhan, KS.: Powder Metall. Review, vol. 6, 2017, no. 4, p. 47
- [30] Burkhardt, C. In: Proc. EuroPM2017 Milan. Shrewsbury : EPMA, 2017
- [31] Isaza, JF., Aumund-Kopp, C.: Powder Metall. Review, vol. 3, 2014, no. 2, p. 41
- [32] Anonymous: Metal Additive Manuf., vol. 2, 2016, no. 2, p. 32
- [33] Bhate, D.: Metal Additive Manuf., vol. 3, 2017, no. 3, p. 81
- [34] Hryha, E., Shvab, R., Gruber, H., Leicht, A., Nyborg, L. In: Proc. EuroPM2017 Milano. Shrewsbury : EPMA, 2017, paper no. 3687558
- [35] Whittaker, D.: Metal Additive Manuf., vol. 3, 2017, no. 4, p. 83