Mechanical Properties of Copper Processed by Equal Channel Angular Pressing

Sülleiová, K.; Ballóková, B.; Besterci, M.; Kvačkaj, T.

doi:10.1515/pmp-2017-0013

Abstract

The development of the nanostructure in commercial pure copper and the strength and ductility after severe plastic deformation (SPD) with the technology of equal channel angular pressing (ECAP) are analysed. Experimental results and analyses showed that both strength and ductility can be increased simultaneously by SPD. The final grain size decreased from the initial 50μm by SPD to 100-300 nm after 10 passes. An increase of the ductility together with an increase of strength caused by SPD are explained by a strong grain refinement and by a dynamic equilibrium of weakening and strengthening, and it is visible on the final static tensile test stress-strain charts.

References

[1] Gleiter, H.: Progress Mat. Sci., vol. 33, 1989, p. 22310.1016/0079-6425(89)90001-7
Search in Google Scholar Back to article
[2] Koch, CC., Cho, YS.: Nanostructured Materials, vol. 1, 1992, p. 20710.1016/0965-9773(92)90096-G
Search in Google Scholar Back to article
[3] Morris, DG.: Mechanical Behaviour of Nanostructured Materials. Trans. Tech. Publ. LTD, 1998, 85 p.10.4028/www.scientific.net/MSFo.2
Search in Google Scholar Back to article
[4] Valiev, RZ. et al.: Mater. Sci. Eng. A, vol. 186, 1993, p. 141
Search in Google Scholar Back to article
[5] Valiev, RZ.: Nanostructured Materials, vol. 6, 1995, p. 7310.1016/0965-9773(95)00031-3
Search in Google Scholar Back to article
[6] Valiev, RZ., Aleksandrov, IV.: Nanostrukturnije materijaly polučenije intensivnoj plastičeskoj deformacii. Moskva : Logos, 2000
Search in Google Scholar Back to article
[7] Valiev, RZ. In: Proceedings Metallic Materials with High Structural Efficiency. NATO Series. Kijev. Ed. O. Senkov, D. Miracle, S. Firstov. Kluwer Acad. Publ., 2003, p. 79
Search in Google Scholar Back to article
[8] Schiotz, J.: Scripta Materialia, vol. 51, 2004, no. 8, p. 83710.1016/j.scriptamat.2004.05.013
Search in Google Scholar Back to article
[9] Yamakov, V. et al.: Nature Mater., vol. 3, 2004, p. 4310.1038/nmat1035
Search in Google Scholar Back to article
[10] Ilucová, L., Král, P., Svoboda, M., Saxl, I., Sklenička, V. In: Proc. 25th Risø International Symposium on Materials Science “Evolution of Deformation Microstructures in 3D“. Ed. C. Gundlach et al. 6 - 10 September 2004. Roskilde : Risø National Laboratory, 2004, p. 363
Search in Google Scholar Back to article
[11] Valiev, RZ., Islamgaliev, RK., Aleksandrov, IV.: Progress Mat. Sci., vol. 45, 2000, no. 2, p. 10310.1016/S0079-6425(99)00007-9
Search in Google Scholar Back to article
[12] Valiev, RZ.: Nature, vol. 419, 2002, p. 88710.1038/419887a
Search in Google Scholar Back to article
[13] Wang, Y., Chen, M., Zhou, E.: Nature, vol. 419, 2002, p. 21210.1038/nature01133
Search in Google Scholar Back to article
[14] Valiev, RZ. et. al.: Scripta Materialia, vol. 37, 1997, p. 194510.1016/S1359-6462(97)00387-4
Search in Google Scholar Back to article
[15] Mabuchi, M. et al.: Scripta Materialia, vol. 36, 1997, p. 6810.1016/S1359-6462(96)00444-7
Search in Google Scholar Back to article
[16] Shan, Z., Stach, EA., Wiezorek, JMK., Knapp, JA., Follstaedt, DM., Mao, SX.: Science, vol. 305, 2004, p. 65410.1126/science.109874115286368
Search in Google Scholar Back to article
[17] Besterci, M., Lofaj, F., Velgosová, O.: Int. J. Materials and Prod. Technology, vol. 22, 2005, no. 4, p. 26310.1504/IJMPT.2005.006456
Search in Google Scholar Back to article
[18] Youssef, KM. et al: Appl. Phys. Lett., vol. 85, 2004, p. 92910.1063/1.1779342
Search in Google Scholar Back to article
[19] Zhu, YT., Liao, XZ.: Nature Mater., vol. 3, 2004, p. 35110.1038/nmat114115173850
Open DOI Search in Google Scholar Back to article
[20] Koch, CC., Moris, DG., Inoue, K.: MRS Bull., vol. 24, 1999, p. 5410.1557/S0883769400051551
Search in Google Scholar Back to article
[21] Zhu, YT. et al.: J. Mater. Res., vol. 18, 2002, p. 1908
Search in Google Scholar Back to article
[22] Saray, O., Purcek, G., Karaman, I., Neindorf, T., Maier, HJ.: Materials Science and Processing Technology, vol. 211, 2011, p. 1085
Search in Google Scholar Back to article
[23] Kvačkaj, T.et al: Micron, vol. 43, 2012, p. 72010.1016/j.micron.2012.01.003
Open DOI Search in Google Scholar Back to article
[24] Weismüller, J., Markmann, J.: Advanced Engineering Materials, vol. 7, 2005, p. 20210.1002/adem.200400211
Open DOI Search in Google Scholar Back to article

Mechanical Properties of Copper Processed by Equal Channel Angular Pressing

Abstract

Paradigm

My account