References
- 1. Cardoso, A.J.M. & Saraiva, E.S. (1993). Computer-aided detection of airgap eccentricity in operating three-phase induction motor by Park’s vector approach. IEEE Transactions on Industry Applications. 29(5), 897–901. DOI: 10.1109/28.245712.
- 2. Cardoso, A.J.M., Cruz, S.M.A. & Fonseca, D.S.B. (1999). Inter-turn stator winding fault diagnosis in three-phase induction motors by Park’s vector approach. IEEE Transactions on Energy Conversion. 14(3), 595–598. DOI: 10.1109/60.790920.
- 3. Estima, J.O., Freire, N.M.A., & Cardoso, A.J.M. (2013). Recent advances in fault diagnosis by Park’s vector. In 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, 12–14 March 2013 (pp. 279–288). Pierre and Marie Curie University, Paris, France: IEEE Industrial Electronics Society.
- 4. Gedzurs, A., & Sniders A. (2015). Experimental Research and Simulation of Induction Motor Stator Winding Non-Stationary Heating. American Journal of Energy and Power Engineering. 2(4), 44–50.
- 5. Gedzurs, A. (2016). Operation reliability of induction motors at egg processing plant ‘Balticovo’. Agronomy Research. 14(S1), 1161–1168.
- 6. Huang, X. (2005). Diagnostics of air gap eccentricity in closed-loop drive-connected induction motor. Dissertation, School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, USA.
- 7. Industrial Bearing Maintenance Manual. (2009). Canada: The Timken Group.
- 8. Mehala, N. (2010). Condition monitoring and fault diagnosis of induction motor using motor current signature analysis. Dissertation, Electrical Engineering department, National Institure of technology, Kurukshetra, India.
- 9. Pons–Llinares, J., Climente–Alarcon, V., Vedreno–Santos, F., Antonino–Daviu, J. & Riera– (2012). Electric machines diagnGuasp, M. Electric machines diagnosis techniques via transient current analysis. In IECON 2012 – 38th Annual Conference on IEEE Industrial Electronics Society, 25–28 October 2012 (pp. 59–64). Melbourne, Victoria, Australia: Australian Library and Information Association. 10. Rolling bearing and seals in electric motors and generators. (2013). SKF Group.