Experience with application of reagent to heat transfer surfaces of combustion device

Veronika Blahůšková; Jozef Vlček; Barbora Grycová; Dalibor Jančar; Marek Velička

doi:10.1515/pjct-2017-0020

References

1. Jiang, D., Xu, H., Khan, H.I., Deng, B. & Zhang, N. (2017). Transport of corrosion products in the steam-water cycle of supercritical power plant. Therm. Engineer. 113, 1164–1169. DOI: 10.1016/j.applthermaleng.2016.11.119.10.1016/j.applthermaleng.2016.11.119
Search in Google Scholar Back to article
2. Bilitewski, B., Härdtle, G. & Marek, K. (1994). Waste Management. Berlin Heidelberg, Germany: Springer-Verlag. ISBN: 3-540-59210-5.
Search in Google Scholar Back to article
3. Obroučka, K. (2003). Thermal waste treatment and energy recovery. 1st edition. Ostrava: VSB-Technical University of Ostrava. ISBN 80-248-0009-8.
Search in Google Scholar Back to article
4. Leskens, M., van Kessel, L.B.M. & Bosgra, O.H. (2005). Model predictive control as a tool for improving the process operation of MSW combustion plants. Waste Managem. 25, 8, 788–798. DOI: 10.1016/j.wasman.2005.03.005.10.1016/j.wasman.2005.03.00515896951
Search in Google Scholar Back to article
5. Kuriger, R., Young, D., Mackenzie, M., Sarv, H. & Trembly, J. (2017). Phase analysis of scale deposition in boiler tubes utilizing steam-assisted gravity drainage produced water. J. Therm. Sci. Engineer. Appl. 9 (1), 011009. DOI: 10.1115/1.4034598.10.1115/1.4034598
Search in Google Scholar Back to article
6. Raman, B., Hall, D.M., Shulder, S.J., Caravaggio, M.F. & Lvov, S.N. (2016). An experimental study of deposition of suspended magnetite in high temperature-high pressure boiler type environments. Coll.Surf. A: Physicochemical and Engineering Aspects. 508, 48–56. DOI: 10.1016/j.colsurfa.2016.08.018.10.1016/j.colsurfa.2016.08.018
Search in Google Scholar Back to article
7. Gao, Z., Zhao, H., Fan, J., Yin, L. & Liao, Y. (2016). Study on structure optimization and heat-transfer characteristics of high-tennperature convective heating surface in pressurized oxy-fuel boilers. J. Chinese Soc. Power Engineer. 36(10), 773–780. ISSN: 16747607.
Search in Google Scholar Back to article
8. Li, J., Zhai, Z., Wang, J. & Huang, S. (2016). On-line fouling monitoring model of condenser in coal-fired power plants. Therm. Engineer. 104, 628–635. DOI: 10.1016/j.applthermaleng.2016.04.131.10.1016/j.applthermaleng.2016.04.131
Search in Google Scholar Back to article
9. Jalalirad, M.R., Abd-Elhady, M.S. & Malayeri, M.R. (2013). Cleaning action of spherical projectiles in tubular heat exchangers International. J. Heat Mass Trans. 57, (2), 491–499. DOI: 10.1016/j.ijheatmasstransfer.2012.10.071.10.1016/j.ijheatmasstransfer.2012.10.071
Search in Google Scholar Back to article
10. Garba, M.U., Ingham, D.B., Ma, L., Degereji, M.U., Pourkashanian, M. & Wiliams, A. (2013). Modelling of deposit formation and sintering for the co-combustion of coal with biomass. Fuel 113(11), 863–872. DOI: 10.1016/j.fuel.2012.12.065.10.1016/j.fuel.2012.12.065
Search in Google Scholar Back to article
11. Decree of the Czech Ministry of the Environment No 415/2012 Coll., on permissible level of pollution and the discovery and implementation of certain other provisions of the Clean Air Act (emission regulation).
Search in Google Scholar Back to article
12. Li, J., Wang, P. & Cheng, L. (2016). Characteristics of ash deposition on a novel heat transfer surface. Huag. Xue./CIESC J. 67(9), 3598–3606. DOI: 10.11949/j.issn.0438-1157.20160232.
Search in Google Scholar Back to article
13. Iannacone, M.M., Castle, J.W. & Rodgers, Jr., J.H. (2009). Characterization of flue gas desulfurization particulates in equalization basins. Fuel 88(9), 1580–1587. DOI: 10.1016/j.fuel.2009.02.035.10.1016/j.fuel.2009.02.035
Search in Google Scholar Back to article
14. Bigham, J.M., Kost, D.A., Stehouwer, R.C., Beeghly, J.H., Fowler, R., Traina, S.J., Wolfe, W.E. & Dick, W.A. (2005). Mineralogical and engineering characteristics of dry flue gas desulfurization products. Fuel 84(14–15), 1839–1848. DOI: 10.1016/j.fuel.2005.03.018.10.1016/j.fuel.2005.03.018
Search in Google Scholar Back to article
15. Zacco, A., Borgese, L., Gianoncelli, A., Depero, L.E. & Bontempi, E. (2014). Review of fly ash inertisation treatments and recycling. Environ. Chem. Lett. 12(1), 153–175. DOI: 10.1007/s10311-014-0454-6.10.1007/s10311-014-0454-6
Search in Google Scholar Back to article
16. Fry, A., Adams, B., Davis, K., Swensen, D. & Cox, W. (2012). Fire-side corrosion of heat transfer surface materials with air- and oxy-coal combustion. In Air and Waste Management Association – Power Plant Air Pollutant Control “MEGA” Symposium 2012, Baltimore, MD, USA; 20–23^rd August 2012.
Search in Google Scholar Back to article
17. Alba, N., Gassó, S., Lacorte, T. & Baldasano, J.M. (1997). Characterization of Municipal Solid Waste incineration residues from facilities with different air pollution control systems. J. Air Waste Managem. Assoc. 47(11), 1170–1179. ISSN: 10962247.10.1080/10473289.1997.10464059
Search in Google Scholar Back to article
18. Van Kessel, L.B.M., Leskens, M. & Brem, G. (2002). Calorific value sensor and validation of dynamic models applied to municipal solid waste combustion. IChemE The Chemical Engineer. 80 B5, 245–255. DOI: 10.1205/095758202762277605.10.1205/095758202762277605
Search in Google Scholar Back to article
19. Breeding, Ch., Tandra, D. & Shah, S. (2010). Boiler Cleaning Using ISB (Intelligent Soot Blowing) System Integration. In ASME 2010 Power Conference, Chicago, USA, 13–15^th July 2010.
Search in Google Scholar Back to article
20. A.I.T. Drivex. (2003). Contre l’encrassement des chaudieres, Revue du Papier Carton, Issue 65, October 2003 (pp. 46–48).
Search in Google Scholar Back to article
21. A.I.T. DRIVEX. Available on the website: <http://www.drivex.fr/Catalogue.htm>
Search in Google Scholar Back to article

Experience with application of reagent to heat transfer surfaces of combustion device

References

Paradigm

My account