References
- 1. Nazneen, F., Galvin, P., Arrigan, D., Thompson, M., Benvenuto, P. & Herzog, G. (2012). Electropolishing of medical-grade stainless steel in preparation for surface nano-texturing. J. Solid State Electroch. 16(4), 1389–1397. DOI: 10.1007/s10008-011-1539-9.
- 2. Lai, J.J. & Lee, S.J. (2003). The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel. J. Mater. Process. Technol. 140, 206–210. DOI: 10.1016/S0924-0136(03)00785-4.
- 3. Jullien, C., Benezech, T., Carpentier, B., Lebret, V. & Faille, C. (2003). Identification of surface characteristics relevant to the hygienic status of stainless steel for the food industry. J. Food. Eng. 56, 77–87. DOI: 10.1016/S0260-8774(02)00150-4.
- 4. Baron, A., Simka, W., Nawrat, G. & Szewieczek, D. (2008). J. Achiev. Mat. Manuf. Eng. 31, 197–202. Electropolishing and chemical passivation of austenitic steel. Retrieved December 10, 2015, from Journal AMME database on the World Wide Web: http://www.journalamme.org
- 5. Hryniewicz, T., Rokicki, R. & Rokosz, K. (2008). Surface characterization of AISI 316L biomaterials obtained by electropolishing in a magnetic field. Surf. Coat. Tech. 202, 1668–1673. DOI: 10.1016/j.surfcoat.2007.07.067.
- 6. Lochyński, P., Łyczkowska, E., Pawełczyk, A. & Szczygieł, B. (2012). Effect of bath exploitation on steel electropolishing process efficiency. Przem. Chem., 91, 846–848.
- 7. Kao, P.S. & Hocheng, H. (2003). Optimization of electro-chemical polishing of stainless steel by grey relational analysis J. Mater. Process. Technol. 140, 255–259. DOI: 10.1016/S0924-0136(03)00747-7.
- 8. Bhuyan, A., Gregory, B., Lei, H., Yuen Yee, S. & Gianchandani, Y.B. (2005). Pulse and DC electropolishing of stainless steel for stents and other devices. In Proceedings of IEEE Sensors. 4th IEEE Conference on Sensors, 31 October – 3 November 2005 (pp. 314–317). Irvine, CA, USA. Publisher IEEE. DOI: 10.1109/ICSENS.2005.1597699 Sensors IEEE, 314–317.
- 9. Hocheng, H., Kao, P.S. & Chen, Y.F. (2001). Electropolishing of 316L stainless steel for anticorrosion passivation. J. Mater. Eng. Perform. 10(4), 414–418. DOI: 10.1361/105994901770344827.
- 10. Shieh, J.M., Liu, S.H. & Dai, B.T. (2006). U.S. Patent No. 20060070888.
- 11. Baldin, A.V., Matvienko, A.F., Krivoshchapova, E.M., Arbuzov, V.L. & Klotsman, S.M. (1985). U.S.S.R. Patent No. 1171570.
- 12. Andreshak, J.C., Datta, M., Romankiw, L.T., Vega, L.F. (1991). U.S. Patent No. 5066370.
- 13. Lin, C.C., Hu, C.C. & Lee, T.C. (2009). Electropolishing of 304 stainless steel: Interactive effects of glycerol content, bath temperature, and current density on surface roughness and morphology. Surf. Coat. Technol. 204, 448–454. DOI: 10.1016/j.surfcoat.2009.08.005.
- 14. Taguchi, C. (2007). Japan Patent No. 2007332416 (A).
- 15. Taguchi, C. (2007). Japan Patent No. 2007231413 (A).
- 16. Lochyński, P., Łyczkowska, E., Szczygiel, B. & Kuczewski, K. (2014). Pitting corrosion of pickled and electropolished Cr-Ni stainless steel. Przem. Chem. 93(5), 762–765. DOI: 10.12916/przemchem.2014.762.
- 17. Mohan, S., Jayashree, G. & Vasudevan, T. (2000). Electropolishing of stainless steel. Bull. Electrochem. 16(9), 388–391.
- 18. Lin, C.C. & Hu, C.C. (2008). Electropolishing of 304 stainless steel: Surface roughness control using experimental design strategies and a summarized electropolishing model. Electro-chim. Acta 53, 3356–3363. DOI: 10.1016/j.electacta.2007.11.075.
- 19. Habibzadeh, S., Li, L., Shum-Tim, D., Davis, E.C. & Omanovic, S. (2014). Electrochemical polishing as a 316L stainless steel surface treatment method: Towards the improvement of biocompatibility. Corrosion Sci. 87, 89–100. DOI: 10.1016/j.corsci.2014.06.010.
- 20. European Commission. (2006). Integrated Pollution Prevention and Control, Reference Document on Best Available Techniques for the Surface Treatment of Metals and Plastics, 1–546.
- 21. Iwan, A., Boharewicz, B., Tazbir, I., Sikora, A., Maliński, M., Chrobak, Ł. & Madej, W. (2015). Laser Beam Induced Current Technique of Polymer Solar Cells Based on New Poly(Azomethine) or Poly(3-Hexylthiophene). Chem. Sci. Rev. Lett. 4(14), 597–607. Database on the World Wide Web: http://www.chesci.com/articles/csrl/v4i14/20_CS12204605.pdf
- 22. Kamble, S.S., Sikora, A., Pawar, S.T., Kambale, R.C., Maldar, N.N. & Deshmukh, L.P. (2015). Morphology reliance of cobalt sulfide thin films: A chemo-thermo-mechanical perception. J. Alloy. Compd. 623, 303–314. DOI: 10.1016/j.jallcom.2015.01.097.
- 23. Lochynski, P., Sikora, A. & Szczygiel, B. (2016): Surface morphology and passive film composition after pickling and electropolishing, Surface Engineering, DOI: 10.1080/02670844.2016.1238189.