References
- 1. Bae, J., Lim, S., Jee, H., Kim, J.H., Yoo, Y.S. & Lee, T. (2007). Small stack performance of intermediate temperature operating solid oxide fuel cells using stainless steel interconnects and anode supported single cell. J. Power Sour. 172, 100–107. DOI: 10.1016/j.jpowsour.2007.01.093.
- 2. Tavazzi, I., Beretta, A., Groppi, G., Forzatti, P., Bao, X. & Xu, Y. (2004). An investigation of methane partial oxidation kinetics over Rh supported catalysts, Studies Surface Science Catalysis – Natural Gas Conversion VII, 147, Elsevier, Amsterdam, 163–168. DOI: 10.1016/S0167-2991(04)80045-4.
- 3. Seyed-Reihani, S.A. & Jackson, G.S. (2010). Catalytic partial oxidation of n-butane over Rh catalysts for solid oxide fuel cell applications. Catal. Today, 155, 75–83. DOI: 10.1016/j.cattod.2009.03.032.
- 4. Lawrence, J. & Boltze, M. (2006). Auxiliary power unit based on a solid oxide fuel cell and fueled with diesel J. Power Sour. 154, 479–488. DOI: 10.1016/j.jpowsour.2005.10.036.
- 5. Frenzel, I., Loukou, A., Trimis, D., Schroeter, F., Mir, L., Marin, R., Egilegor, B., Manzanedo, J., Raju, G., de Bruijne, M., Wesseling, R., Fernades, S., Pereira, J.M.Ch., Vourliotakis, G., Founti, M. & Posdziech, O. (2012). Development of an SOFC based micro-CHP system in the framework of the European project FC-DISTRICT. Energy Proc. 28, 170–181. DOI: 10.1016/j.egypro.2012.08.051.
- 6. Kupilik, M. & Vincent, T.L. (2013). Control of a solid oxide fuel cell system with sensitivity to carbon formation. J. Power Sour. 222, 267–276. DOI: 10.1016/j.jpowsour.2012.08.083.
- 7. Pukrushpan, J., Stefanopoulou, A., Varigonda, S., Eborn, J. & Haugstetter, C. (2006). Control oriented model of fuel processor for hydrogen generation in fuel cell applications, Control Engine. Pract. 14(3), 277–293. DOI: 10.1016/j.conengprac.2005.04.014.
- 8. Zhu, J., Zhang, D. & King, K.D. (2001). Reforming of CH4 by partial oxidation: thermodynamic and kinetic analyses. Fuel 80(7), 899–905. DOI: S0016-2361(00)00165-4.
- 9. Larentis, A.L., de Resende, N.S., Salim, V.M.M. & Pinto, J.C. (2001). Modeling and optimization of the combined carbon dioxide reforming and partial oxidation of natural gas. Appl. Catal. 215(1–2), 211–224. DOI: S0926-860X(01)00533-6.
- 10, Xi, H., Sun, J. & Tsourapas, V. (2007). A control oriented low order dynamic model for planar SOFC using minimum Gibbs free energy method. J. Power Sour. 165(1), 253–266. DOI: 10.1016/j.jpowsour.2006.12.009.
- 11. Singhal, S. & Kendall, K. (2004). High temperature Solid Oxide Fuel Cells: Fundamentals, Des. Applicat. Elsev. Sci. ISBN: 978-1-85617-387-2.
- 12. Larminie, J. & Dicks, A. (2003). Fuel Cell Systems Explained, 2nd Edition, Wiley. ISBN: 0-470-84857-X.
- 13. Aguiar, P., Adjiman, C.S. & Brandon, N.P. (2006). Anode supported intermediate temperature direct internal reforming solid oxide fuel cell. I: Model based steady-state performance. J. Power Sour. 138(1–2), 120–136. DOI: 10.1016/j.jpowsour.2004.06.040.