References
- 1. Kotyczka-Morańska, M., Tomaszewicz, G. & Łabojko, G. (2012). Comparison of different methods for enhancing CO2 capture by CaO-based sorbents. Review. Physicochem. Probl. Miner. Process. 48, 77–90.
- 2. Manovic, V. & Anthony, E. (2007). SO2 retention by reactivated CaO-based sorbent from multiple CO2 Capture Cycles. Environ. Sci. Technol. 41, 4435–4440. DOI: 10.1021/es0629458.
- 3. Li, Y., Zhao, Ch., Chen, H., Liang, C., Duan, L. & Zhou, W. (2009) Modified CaO-based sorbent looping cycle for CO2 mitigation. Fuel 88, 697–704. DOI: 10.1016/j.fuel.2008.09.018.
- 4. Manovic, V. & Anthony, E. (2010a). Sulfation Performance of CaO-Based Pellets Supported by Calcium Aluminate Cements Designed for High-Temperature CO2 Capture. Energy & Fuels 24, 1414–1420. DOI: 10.1021/ef900943h.
- 5. Adánez, J., de Diego, L. & Garcia-Labiano, F. (1999). Calcination of calcium acetate and calcium magnesium acetate: effect of the reacting atmosphere. Fuel, 78, 583–592. DOI: 10.1016/S0016-2361(98)00186-0.
- 6. Nimmo, W., Patsias, A., Hampartsoumian, E., Gibbs, B., Fairweather, M. & Williams, P. (2004). Calcium magnesium acetate and urea advanced reburning for NO control with simultaneous SO2 reduction. Fuel 83, 1143–1150. DOI: 10.1016/j.fuel.2003.11.011.
- 7. Patsias, A., Nimmo, W., Gibbs, B. & Williams, P. (2005). Calcium-based sorbents for simultaneous NOx/SOx reduction in a down-fired furnace. Fuel 84, 1864–1873. DOI: 10.1016/j.fuel.2005.03.009.
- 8. Manovic, V. & Anthony, E. (2010b). CO2 Carrying behavior of calcium aluminate pellets under high-temperature/high-CO2 concentration calcination conditions. Ind. Eng. Chem. Res. 49, 6916–6922. DOI: 10.1021/ie901795e.
- 9. Manovic, V. & Anthony, E. (2008). Parametric Study on the CO2 Capture Capacity of CaO-Based Sorbents in Looping Cycles. Energy & Fuels 22, 1851–1857. DOI: 10.1021/ef800011z.
- 10. Bouquet, E., Leyssens, G., Schönnenbeck, C. & Gilot, P. (2009). The decrease of carbonation efficiency of CaO along calcination–carbonation cycles: Experiments and modelling. Chem. Eng. Sci. 64, 2136–2146. DOI: 10.1016/j.ces.2009.01.045.
- 11. Hughes, R., Lu, D., Anthony, E. & Wu, Y. (2004). Improved long-term conversion of limestone-derived sorbents for in situ capture of CO2 in a fluidized bed combustor. Ind. Eng. Chem. Res. 43, 5529–5539. DOI: 10.1021/ie034260b.
- 12. Beruto, D., Barco, L. & Searcy, A. (1984). CO2-catalyzed surface area and porosity changes in high-surface-area CaO aggregates. J. Am. Ceram. Soc. 67, 512–516. DOI: 0.1111/j.1151-2916.1984.tb19644.x.
- 13. Butler, J., Lim, C. & Grace, J. (2014). Kinetics of CO2 absorption by CaO through pressure swing cycling. Fuel 127, 78–87. DOI: 10.1016/j.fuel.2013.09.058.
- 14. Oakeson, W. & Culter, I. (1979). Effect of CO2 pressure on the reaction with CaO. J. Am. Ceram. Soc. 62, 556–558. DOI: 10.1111/j.1151-2916.1979.tb12729.x.
- 15. Bhatia, S. & Perlmutter, D. (1983). Effect of the product layer on the kinetics on the CO2-lime Reaction. AIChE J. 29, 79–86. DOI: 10.1002/aic.690290111.
- 16. Lee, D. (2004). An apparent kinetic model for the carbonation of calcium oxide by carbon dioxide. Chem. Eng. J. 100, 71–77. DOI: 10.1016/j.cej.2003.12.003.
- 17. Li, Z. & Cai, N. (2007). Modeling of multiple cycles for sorption-enhanced steam methane reforming and sorbent regeneration in fixed bed reactor. Energy & Fuels 21, 2909–2918. DOI: 10.1021/ef070112c.
- 18. Szekely, J. & Evans, J. (1970). Structural model for gas–solid reactions with a moving boundary. Chem. Eng. Sci. 25, 1091–1107. DOI: 10.1016/0009-2509(71)86033-5.
- 19. Johnsen, K., Grace, J., Elnashaie, S., Kolbeinsen, L. & Eriksen, D. (2006). Modelling of sorption-enhanced steam reforming in a dual fluidized bubbling bed reactor. Ind. Eng. Chem. Res. 45, 4133–4144. DOI: 10.1021/ie0511736.
- 20. Bhatia, S. & Perlmutter, D. (1980). A random pore model for fluid–solid reactions: I. Isothermal, kinetic control. AIChE J. 26, 379–386. DOI: 10.1002/aic.690260308.
- 21. Bhatia, S. & Perlmutter, D. (1981). A random pore model for fluid–solid reactions: II. Diffusion and transport effects. AIChE J. 27, 247–254. DOI: 10.1002/aic.690270211.
- 22. Grasa, G., Murillo, R., Alonso, M. & Abanades, J. (2009). Application of the random pore model to the carbonation cyclic reaction. AIChE J. 55, 1246–1255. DOI: 0.1002/aic.11746.
- 23. Liu, W., Dennis, J. Sultan, D. Redfern, S. & Scott, S. (2012). An investigation of the kinetics of CO2 uptake by a synthetic calcium based sorbent. Chem. Eng. Sci. 69, 644–658. DOI: 10.1016/j.ces.2011.11.036.
- 24. Yu, Y., Liu, W., An, H., Yang, F., Wang, G., Feng, B., Zhang, Z. & Rudolph, V. (2012). Modeling of the carbonation behavior of a calcium based sorbent for CO2 capture. Int. J. Greenhouse Gas Cont. 10; 510–519. DOI: 10.1016/j.ijggc.2012.07.016.
- 25. Chen, H., Zhao, Ch., Li, Y. & Chen, X. (2010). CO2 Capture Performance of Calcium-Based Sorbents in a Pressurized Carbonation/Calcination Loop. Energy Fuels 24, 5751–5756. DOI: 10.1021/ef100565d.
- 26. Baker, E.H. (1962). The calcium oxide-carbon dioxide system in the pressure range 1–300 atmospheres. J. Chem. Soc. (464–470). DOI: 10.1039/JR9620000464.
- 27. Szekely, J., Evans, J.W. & Sohn, H.Y. Gas-solid reactions. Academic Press, New York (1976).
- 28. Levenspiel, O. (1972) Chemical Reaction Engineering. Third ed. Wiley, New York.
- 29. Yagi, S. & Kunii, D. (1955) Studies on combustion of carbon particles in flames and fluidized beds, Proceedings of 5th (int.) Symbosium on Combustion, Reinhold, New York, 231.
- 30. Zhou, Z., Xu, P., Xie, M., Cheng, Z. & Yuan, W. (2013). Modeling of the carbonation kinetics of a synthetic CaObased sorbent. Chem. Eng. Sci. 95, 283–290. DOI: 10.1016/j.ces.2013.03.047.