References
- 1. Zani, L., Bayer, C. M., Biancolini, M. E., Bonifetto, R., Bruzzone, P., Brutti, C., Ciazynski, D., Coleman, M., Duran, I., Eisterer, M., Fietz, W. H., Gade, P. V., Gaio, E., Giorgetti, F., Goldacker, W., Gömöry, F., Granados, X., Heller, R., Hertout, P., Hoa, C., Kario, A., Lacroix, B., Lewandowska, M., Maistrello, A., Muzzi, L., Nijhuis, A., Nunio, F., Panin, A., Petrisor, T., Poncet, J.-M., Prokopec, R., Sanmarti Cardona, M., Savoldi, L., Schlachter, S. I., Sedlak, K., Stepanov, B., Tiseanu, I., Torre, A., Turtù, S., Vallcorba, R., Vojenciak, M., Weiss, K.-P., Wesche, R., Yagotintsev, K., & Zanino, R. (2016). Overview of progress on the EU DEMO reactor magnet system design. IEEE Trans. Appl. Supercond., 26(4), 4204505. DOI: 10.1109/TASC.2016.2536755.
- 2. Fietz, W. H., Barth, Ch., Drotziger, S., Goldacker, W., Heller, R., Schlachter, S. I., & Weiss, K.-P. (2013). Prospects of high temperature superconductors for fusion magnets and power applications. Fusion Eng. Des., 88, 440–445. DOI: 10.1016/j.fusengdes.2013.03.059.
- 3. Uglietti, D., Bykovsky, N., Wesche, R., & Bruzzone, P. (2015). Development of HTS conductors for fusion magnets. IEEE Trans. Appl. Supercond., 25(3), 4202106. DOI: 10.1109/TASC.2014.2364715.
- 4. Sedlak, K. (2015). TF conductor and WP#1 design based on 2015 reference. Report WPMAG-MCD-2.1-T01 RS02. (IDM reference: EFDA_D_2MHQQ5).
- 5. Muzzi, L., Turtù, S., Fiamozzi Zignani, C., & Anemona, A. (2015). Design of 2015 TF Winding Pack Option 2 (WP#2) and of “ENEA” LTS cable. Report for WPMAG-MCD-2.1-T02 RS02. (IDM reference: EFDA_D_2LF3Z8).
- 6. Ciazynski, D., & Torre, A. (2015). TF WP#3 design based on 2015 EUROfusion configuration. Report WPMAG-MCD 2.1-T003 RS03. (IDM reference: EFDA_D_2MDLUL).
- 7. Lewandowska, M., & Sedlak, K. (2014). Thermal-hydraulic analysis of LTS cables for the DEMO TF coil. IEEE Trans. Appl. Supercond., 24(3), 4200305. DOI: 10.1109/TASC.2013.2281625.
- 8. Lewandowska, M., & Sedlak, K. (2016). Thermal-hydraulic analysis of the improved LTS conductor design concepts for the DEMO TF coil. Prz. Elektrotech., 92(4), 179–182. DOI: 10.15199/48.2016.04.39.
- 9. Lewandowska, M., Sedlak, K., & Zani, L. (2016). Thermal-hydraulic analysis of the low Tc superconductor (LTS) winding pack design concepts for the DEMO toroidal field (TF) coil. IEEE Trans. Appl. Supercond., 26(4), 4205305. DOI: 10.1109/TASC.2016.2542003.
- 10. Bagnasco, M., Bottura, L., & Lewandowska, M. (2010). Friction factor correlation for CICC’s based on a porous media analogy. Cryogenics, 50(11/12), 711–719. DOI: 10.1016/j.cryogenics.2010.06.016.
- 11. Lewandowska, M., & Bagnasco, M. (2011). Modified friction factor correlation for CICC’s based on a porous media analogy. Cryogenics, 51(9), 541–545. DOI: 10.1016/j.cryogenics.2011.07.003.
- 12. Shah, R. K., & Sekulić D. P. (2003). Fundamentals of heat exchanger design. New Jersey, USA: Wiley.
- 13. Zanino, R., Santagati, P., & Savoldi, L. (2000). Friction factor correlation with application to the central cooling channel of Cable-in-Conduit superconductors for fusion magnets. IEEE Trans. Appl. Supercond., 10(1), 1066–1069.
- 14. Zanino, R., Giors, S., & Savoldi-Richard, L. (2007). CFD modelling of ITER cable-in-conduit superconductors. Part III: correlation for the central channel friction factor. In 21st International Cryogenic Engineering Conference (ICEC 21), 17–21 July 2006 (pp. 207–210).
- 15. Vallcorba, R., Lacroix, B., Ciazynski, D., Torre, A., Nunio, F., Zani, L., Le Coz, Q., Lewandowska, M., & Coleman, M. (2016). Thermo-hydraulic analyses associated with a CEA design proposal for a DEMO TF conductor. Cryogenics, 80(Pt. 3), 317–324. DOI: 10.1016/j.cryogenics.2016.05.004.
- 16. Brighenti, A., Bonifetto, R., Savoldi, L., & Zanino, R. (2016). Preliminary thermal-hydraulic analysis of the performance of the ENEA updated WP during plasma burn. Report for WPMAG-MCD-2.2-T002 D002. (IDM reference: EFDA_D_2N28R4).
- 17. Lacroix, B., & Vallcorba, R. (2015). Common approach for quench analyses. Report for WPMAG-MCD-2.2. (IDM reference: EFDA_D_2M6DW4).
- 18. Bottura, L., Rosso, C., & Breschi, M. (2000). A general model for thermal, hydraulic and electric analysis of superconducting cables. Cryogenics, 40(8/10), 617–626. DOI: 10.1016/S0011-2275(01)00019-4.
- 19. Savoldi Richard, L., Casella, F., Fiori, B., & Zanino, R. (2010). The 4C code for the cryogenic circuit conductor and coil modeling in ITER. Cryogenics, 50(3), 167–176. DOI: 10.1016/j.cryogenics.2009.07.008.
- 20. ITER. (2006). ITER Design Description Document. Magnets. Section 1: Engineering Description. ITER_D_22HV5L v2.2.