Have a personal or library account? Click to login

Positron annihilation studies of high-manganese steel deformed by rolling

Nukleonika
Volume 60 (2015): Issue 4 (December 2015)
By:
Open Access
|Dec 2015

References

  1. 1. Gutierrez-Urrutia, I., & Raabe, D. (2012). Grain size effect on strain hardening in twinning-induced plasticity steels. Scripta Mater., 66, 992–996. DOI: 10.1016/j.scriptamat.2012.01.037.10.1016/j.scriptamat.2012.01.037
    Search in Google Scholar
  2. 2. Yakubtsov, I. A., Ariapour, A., & Perovic, D. D. (1999). Effect of nitrogen on stacking fault energy of f.c.c. iron-based alloys. Acta Mater., 47, 1271–1279. DOI: 10.1016/S1359-6454(98)00419-4.10.1016/S1359-6454(98)00419-4
    Search in Google Scholar
  3. 3. Adler, P. H., Olson, G. B., & Owen, W. S. (1986). Strain hardening of hadfield manganese steel. Metall. Mater. Trans. A-Phys. Metal. Mater. Sci., 17, 1725–1737. DOI: 10.1007/BF02817271.10.1007/BF02817271
    Search in Google Scholar
  4. 4. Allain, S., Chateau, J. P., Dahmoun, D., & Bouaziz, O. (2004). Modeling of mechanical twinning in a high manganese content austenitic steel. Mater. Sci. Eng. A, 387/389, 272–276. DOI: 10.1016/j.msea.2004.05.038.10.1016/j.msea.2004.05.038
    Search in Google Scholar
  5. 5. Miodownik, A. P. (1998). The role of anti-ferromagnetism on gamma-epsilon transformation in Fe-Mn alloys. Z. Metallkunde, 89, 840–847.
    Search in Google Scholar
  6. 6. Schumann, H. (1972). Distribution of phases in Fe-Mn-C system after deformation. Neue Hutte, 17, 605–609.
    Search in Google Scholar
  7. 7. Frommeyer, G., Brux, U., & Neumann, P. (2003). Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes. ISIJ Int., 43, 438–446. DOI: 10.2355/isijinternational.43.438.10.2355/isijinternational.43.438
    Search in Google Scholar
  8. 8. Dumay, A., Chateau, J. -P., Allain, S., Migot, S., & Bouaziz, O. (2008). Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel. Mater. Sci. Eng. A, 483/484, 184–187. DOI: 10.1016/j.msea.2006.12.170.10.1016/j.msea.2006.12.170
    Search in Google Scholar
  9. 9. Wang, X. D., Huang, B. X., & Rong, Y. H. (2008). On deformation mechanism of twinning-induced plasticity steel. Phil. Mag. Lett., 88, 845–851. DOI: 10.1080/09500830802438123.10.1080/09500830802438123
    Search in Google Scholar
  10. 10. http://www.calphad.com/iron-manganese.html.
    Search in Google Scholar
  11. 11. Rabinkin, A. (1979). On magnetic contributions to γ→ε phase transformations in Fe-Mn alloys. Calphad, 3, 77–84. DOI: 10.1016/0364-5916(79)90008-7.10.1016/0364-5916(79)90008-7
    Search in Google Scholar
  12. 12. Dryzek, E., Sarnek, M., & Wróbel, M. (2014). Reverse transformation of deformation-induced martensite in austenitic stainless steel studied by positron annihilation. J. Mater. Sci., 49, 8449–8458. DOI: 10.1007/s10853-014-8555-y.10.1007/s10853-014-8555-y
    Search in Google Scholar
  13. 13. De Cooman, B. C., Chin, K., & Kim, J. (2011). High Mn TWIP steels for automotive applications. In M. Chiaberge (Ed.), New trends and developments in automotive system engineering, InTech (pp. 101–128), from http://www.intechopen.com/books/new-trends-and-developments-in-automotive-system-engineering/high-mn-twip-steels-for-automotive-applications.
    Search in Google Scholar
  14. 14. Tavares, S. S. M., Lafuente, A., Miraglia, S., & Fruchart, D. (2002). X-ray diffraction and magnetic analysis of deformation induced martensites in a Fe-17Mn-1.9Al-0.1C steel. J. Mater. Sci., 37, 1645–1648. DOI: 10.1023/A:1014948831730.10.1023/A:1014948831730
    Search in Google Scholar
  15. 15. Kliber, J., Kursa, T., Drozd, K., Hajduchová, L., & Pešlová, F. (2012). Metallographic exploration of twip steel. In 24th International Conference on Metallurgy and Material METAL 23–25 May 2012 (pp. 446–452). Brno, Česká Republika.
    Search in Google Scholar
  16. 16. Dryzek, E., Sarnek, M., & Siemek, K. (2013). Annealing behavior of plastically deformed stainless steel 1.4307 studied by positron annihilation methods. Nukleonika, 58, 213−217.
    Search in Google Scholar
  17. 17. Dryzek, E., & Sarnek, M. (2014). Reverse transformation of deformation induced martensite in austenitic stainless steel studied by positron annihilation. Acta Phys. Pol. A, 125, 710–713. DOI: 10.12693/APhysPolA.125.710.10.12693/APhysPolA.125.710
    Search in Google Scholar
  18. 18. Padilha, A. F., Plaut, R. L., & Rios, P. R. (2003). Annealing of cold-worked austenitic stainless steels. ISIJ Int., 43, 135–143. DOI: 10.2355/isijinternational.43.135.10.2355/isijinternational.43.135
    Search in Google Scholar
  19. 19. Lü, Y., Hutchinson, B., Molodov, D. A., & Gottstein, G. (2010). Effect of deformation and annealing on the formation and reversion of ε-martensite in an Fe-Mn-C alloy. Acta Mater., 58, 3079–3090. DOI: 10.1016/j.actamat.2010.01.045.10.1016/j.actamat.2010.01.045
    Search in Google Scholar
  20. 20. Lü, Y., Molodov, D. A., & Gottstein, G. (2011). Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe-Mn-C alloy. Acta Mater., 59, 229–3243. DOI: 10.1016/j.actamat.2011.01.063.10.1016/j.actamat.2011.01.063
    Search in Google Scholar
DOI: https://doi.org/10.1515/nuka-2015-0126 | Journal eISSN: 1508-5791 | Journal ISSN: 0029-5922
Journal RSS Feed
Language: English
Page range: 709 - 712
Submitted on: Jun 25, 2015
Accepted on: Aug 24, 2015
Published on: Dec 1, 2015
Published by: Institute of Nuclear Chemistry and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
plastic deformation,
positron annihilation,
high manganese steel
Related subjects:
Chemistry,
Nuclear chemistry,
Physics,
Astronomy and astrophysics,
Physics, other

© 2015 Ewa Dryzek, Maciej Sarnek, Mirosław Wróbel, published by Institute of Nuclear Chemistry and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Previous articleVolume 60 (2015): Issue 4 (December 2015)Next article