References
- [1] Ragan, E., Ružbarský, J.: Vývoj technológie liatia železných zliatin pod tlakom - 2007. In: Technologické inžinierstvo. Roč. 4, č. 1 (2007), pages 115-116
- [2] Batyšev, A. I. et al.: Litje s krystalizacijej pod davlenijem, 1. Vyd. Moskva, 1989
- [3] Gašpar, Š., Paško, J., Puškáš, M.: Effect of Pressing Speed and Specific Pressure in Pressure Mould Cavity on Values of Mechanical Properties of Aluminium Cast of Lower Wight Category made from EN AC 47100 Alloy - 2014. In: International Journal of Cast Metals Research. Vol. 27, no. 5 (2014), pp. 267-274. ISSN 1364-0461
- [4] Ragan, E.: Liatie železných kovov pod tlakom, Acta Meta-lurgica Slovaca 2002, No. 2, pp. 328-334
- [5] Ružbarský, J., Paško, J., Gašpár, Š.: Techniques of Die Casting. RAM-Verlag, 2014, 199 p. ISBN 978-3-942303-29-3
- [6] Edwards, M., Endean, M.: Manufacturing with Materials, The Open University U.K. 1990
- [7] Vinarcik, E. J.: High Integrity Die Casting Processes, John Wiley and Sons, New York, 2003
- [8] P. Lundkvist, P., Bergquist, B.: Experimental study of oscillation mark depth in continuous casting of steel In: Ironmaking & Steelmaking, 2013, pp. 304-30910.1179/1743281213Y.0000000132
- [9] Bialy, W., Ruzbarsky, J.: Breakdown cause and effect analysis. Case study, In: Management Systems in Production Engineering, Vol. 26, Issue: 2, 2018, pp. 83-87
- [10] Gaspar, S., Pasko, J.: Technological Aspects of Returnable Material Introducing within Die Casting Technology. In: Tem journal-technology education management informatics, Vol. 5, Issue: 4, 2016, pp. 441-445
- [11] Dobransky, J., Ruzbarsky, J., Mandulak, D. et al.: Monitoring of the Production Process in Mass Production of Dimensionally Accurate Products, In: Tem journal-technology education management informatics, Vol. 5, Issue: 2, 2016, pp. 175-179
- [12] Pasko, J., Gaspar, S., Ruzbarsky, J.:Die Casting Defects of Castings from Silumin. In: Applied Mechanics and Materials, Vol. 510, 2014, pp. 91-96
- [13] Ruzbarsky, J.: Dynamics of core taking out at die casting. In: Applied Mechanics and Materials. Vol. 616, 2014, pp. 244-25110.4028/www.scientific.net/AMM.616.244
- [14] Gaspar, S., Pasko, J., Majernik, J.: Crystallization of Aluminium Alloys. In: Applied Mechanics and Materials, 2014, Vol. 624, pp. 48-51
- [15] Gaspar, S., Pasko, J.: Analysis of Influence of Pressing Speed, of Melt Temperature and of Casting Position in a Mold upon Ultimate Tensile Strength R-m of Die Casting from Aluminium. In: Advanced Materials Research, 2014, Vol. 909, pp. 3-7
- [16] Gaspar, S.; Pasko, J.: Technological parameters of die casting and quality of casting from EN AC 46500 alloy. In: Metalurgija, Vol. 55, Issue: 3, 2016, pp. 391-394
- [17] Majernik, R., Ruzbarsky, J.: The impact of technological parameters of die casting to casting porosity. 2016. In: MM Science Journal. Vol. 2016, no. October (2016), pp. 1047-1050.
- [18] Ružbarský, J., Majerník, R.: Theoretical regulation of delimitation of metal level decrease in the furnace in case of pneumatic dosing device of metal. 2017. In: Manufacturing Technology. Vol. 17, no. 1 (2017), pp. 84-86.
- [19] Ružbarský, J., Majerník, R., Hrabě, P., Valášek, P.: Dynamics of treatment device for die casting of metals. In: Key Engineering Materials, Vol. 669, 2016, pp. 327-334.