References
- [1] A. Bergelis. “Impact of collaborative manufacturing engineering on production variety and efficiency”, in Proc. of 10thInternational Conference: New Ways in Manufacturing Technologies 2010, Prešov, 2010, pp. 95-102.
- [2] H. Hirano. 5 Pillars of the visual workplace. Portland, OR: Productivity Press, 1998.
- [3] T. Hoshi. “High productivity machining research in Japan”. Journal of Applied Metal Working, vol. 4, no. 3, pp. 226-237, 1986.
- [4] J.T. Luxhoj, J.O. Riis and U. Thorsteinsson. “Trends and perspectives in industrial Maitenance Management”. Journal of Manufacturing Systems, vol. 16, no. 6, pp. 437-453, 1997.
- [5] J. Madl. “Computer - Aided determination of machining conditions”. Science Report CEEPUS, Kielce, 2010, pp. 97-103. ISBN 978-83-88906-56-5
- [6] J. Madl and J. Kvasnička. Optimalizace obraběciho procesu. Praha: ČVUT, 1998.
- [7] K. Vasilko and G. Bokučava. Technologia automatizovanej strojarskej vyroby. Bratislava: ALFA, 1991.
- [8] K. Vasilko. “Analysis of the Impact of Cutting on Machining Process”. Manufacturing Engineering, no. 1, pp. 5-9, 2010.
- [9] K. Vasilkoand J. Madl. Teorie obraběni, vol. 2. Usti nad Labem-město: Vydavateľstvo Univerzita J.E. Purkyně v Usti nad Labem, 2012.
- [10] D. Matiskova. “Automatic of component production and minimalization of production costs“. Acta Technica Corviniensis, vol. 5, no. 2, pp. 103-106, 2012.
- [11] D. Matiskova and M. Kotus. “Methodology for determining the cutting conditions in drilling of automated manufacturing“. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 62, no. 5, pp. 1033-1040, 2014.
- [12] M. Kotus, J. Brezinova and A. Guzanova. “Application of hard surfacing for repairing of agricultural parts“. Research in agricultural engineering, vol. 59, no. 2, pp. 61-67, 2013.
- [13] M. Kotus, D. Matiskova and L. Mura. “Impact of technological factors on dosing of metal at die-casting“. Advanced Materials Research, vol. 801, pp. 143-149, 2013.
- [14] V. Cviklovič and S. Paulovič. “Using selected transient methods for measurements of thermophysical parameters of building materials”. Acta Technologica Agriculturae, vol. 17, no. 1, pp. 21-23, 2014.
- [15] D. Matiskova and Ľ. Ambriško. “Optimization of cutting conditions and improvement of production in economic terms”. TEM Journal, vol. 6, no. 3, pp. 584- 590, 2017.
- [16] D. Matiskova. “Evaluation of the Effectivenes of Engineering Production Processes using Pareto Analysis“. TEM Journal, vol. 4, no. 1, pp. 96-101, 2015.
- [17] M. Flimel. “Determining cumulative room temperature under in situ conditions using combined method”. Advanced Materials Research, vol. 899, pp. 116-119, 2014.
- [18] R. Hricova and M. Balog. “Introduction of RFID system into transport and defining its model of return on investment“. International Journal of Engineering Research in Africa, vol. 18, pp. 130-135, 2015.
- [19] M. Prislupčak, A. Panda, M. Jančik, I. Pandova, P. Orendač and T. Krenicky. “Diagnostic and Experimental Valuation on Progressive Machining unit“. Applied Mechanics and Materials, vol. 616, pp. 191- 199, 2014.
- [20] A. Panda, J. Duplak, J. Jurko and M. Behun. “New experimental expression of durability dependence for ceramic cutting tool“. Applied Mechanics and Materials, vol. 275-277, pages 2230-2236, 2013.