References
- [1] M. Kreidl. Měření teploty – Senzory a měřící obvody. Praha: BEN – technická literatura, 2005.
- [2] P. Beneš, J. Chlebný, J. Král, J. Langer and M. Martinásková. Automatizace a automatizační technika 3 – Prostředky automatizační techniky. Brno: Computer Press, 2014.
- [3] L. Chybowski, K. Gawdzińska and B. Wiśnicki. “Qualitative importance measures of systems components – a new approach and its applications”. Management Systems in Production Engineering, vol. 24, no. 4, pp. 237-246, 2016.
- [4] J. Šturcel. Snímače a prevodníky. Bratislava: Vydavateľstvo STU, 2002.
- [5] P. Koleda, P. Koleda and S. Grúbel. “Analysis of temperatures in the mould area during the process of engine cylinder heads casting”. Acta facultatis technicae, vol. 1, pp. 31-40, 2016.
- [6] S. Gierej. “Big data in the industry – overview of selected issues”. Management Systems in Production Engineering, vol. 25, no. 4, pp. 251-254, 2017.
- [7] M. Kreidl and R. Šmíd. Technická diagnostika – Senzory, metody, analýza signálu. Praha: BEN – technicka literatura, 2006.
- [8] P. Beneš, J. Janeček, J. Král, G. Künzel, B. Lacko, J. Semerád, P. Souček, L. Šmejkal, R. Voráček, L. Maixner and B. Šulc. Automatizace a automatizační technika 1 – Systémové pojetí automatizace. Brno: Computer Press, 2012.
- [9] R. Strnad. “Měřeni teploty – porozumění vlastnostem měřicího přístroje”. Automa, vol. 15, no. 6, pp. 31-38, 2009.
- [10] S. Surya and S.S. Chauhan. “Water Level Indicator with Temperature Sensor”. IOSR Journal of Electrical and Electronics Engineering, vol. 10, no. 3, pp. 65-71, 2015.
- [11] P.D. Patil and R.D. Patil. “Designing Multisensor Embedded System Using PSoC”. International Journal of Current Advanced Research, vol. 8, no. 4, pp. 271-274, 2015.
- [12] G. Gricius, D. Drungilas, A. Andziulis, D. Dzemydiene, M. Voznak, M. Kurmis and S. Jakovlev. “Advanced Approach of Multiagent Based Buoy Communication”. The Scientific World Journal, vol. 2015, 2015.
- [13] H. Jing. “Design and Development of the Temperature Detection System”. International Journal of Control and Automation, vol. 8, no. 2, pp. 409-416, 2015.
- [14] Ľ. Naščák and P. Koleda. “Regulácia teploty modelu teplovzdušnej sušiarne programovateľným automatom”. Acta facultatis technicae, vol. 1, pp. 127-133, 2014.
- [15] I.V. Abramov, A.I. Abramov, Z.R. Nikitin, E. Sosnovich, P. Božek and V. Stollmann. “Diagnostics of Electrical Drives”, in Proc. of International Conference on Electrical Drives and Power Electronics, 2015, pp. 364-367.
- [16] P. Frankovský, O. Ostertag, F. Trebuňa, E. Ostertagová and M. Kelemen. “Methodology of contact stress analysis of gearwheel by means of experimental photoelasticity”. Applied optics, vol. 55, no. 18, pp. 4856-4864, 2016.
- [17] K. Masláková, F. Trebuňa, P. Frankovský and M. Binda. “Applications of the strain gauge – for determination of residual stresses using ring-core method”. Procedia Engineering, vol. 48, pp. 396-401, 2012.
- [18] T. Stejskal, J. Kovac and S. Valencik. “Mechanism of randomness in vibration signals of machinery”, in Proc. of International Conference on Industrial, Service and Humanoid Robotics, 2012, pp. 257-262.