References
- [1] M. Murua, “Application of Advanced Regression Methods for Wear Prediction of Superalloys”, MT (2016).
- [2] S. Olovsjö, A. Wretland and G. Sjöberg, “The effect of grain size and hardness of wrought Alloy 718 on the wear of cemented carbide tools”, Wear, vol. 268, no. 9-10, pp. 1045-1052, 2010.
- [3] S. Sahu and B.B. Choudhury, “Optimization of Surface Roughness using Taguchi Methodology & Prediction of Tool Wear in Hard Turning Tools”, Materials Today: Proceedings, vol. 2, no. 4-5, pp. 2615-2623, 2015.
- [4] Suarez, A. Wretland, “Influence of Cooling conditions on the Carbide tools Wear in the Turning of Inconel 718”, (2015).
- [5] S. Olovsjö, A. Wretland and G. Sjöberg, “The effect of grain size and hardness of Waspaloy on the wear of cemented carbide tools”, The International Journal of Advanced Manufacturing Technology, vol. 50, no. 9, pp 907-915, Oct. 2010.
- [6] R.Q. Sardiñas, M.R. Santana and E.A. Brindis, “Genetic algorithm-based multi-objective optimization of cutting parameters in turning processes”, Engineering Applications of Artificial Intelligence, vol. 19, no. 2, pp. 127-133, Mar. 2006.
- [7] S.K. Choudhury and P. Srinivas, “Tool wear prediction in turning”, Journal of Materials Processing Technology, vol. 153-154, pp. 276-280, Nov. 2004.
- [8] T. Özel and Y. Karpat, ”Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks”, International Journal of Machine Tools and Manufacture, vol. 45, no. 4-5, pp. 467-479, Apr. 2005.
- [9] R.A. Maronna, R.D. Martin and V.J. Yohai, Robust Statistics. Theory and Methods. Chichester: Wiley, 2006.
- [10] S. Terashima, K. Takahama, M. Nozaki and M. Tanaka, “Recrystalization of Sn Grains due to Thermal Strain in Sn-1.2Ag-0.5Cu-0.05Ni Solder”, Materials Transaction, vol. 45, no. 4, pp. 1383-1390, 2004.
- [11] Y.B. Lee, D.H. Shin, K.T. Park and W.J. Nam, “Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature”, Scripta Materialia, vol. 51, no. 4, pp. 355-359, Aug. 2004.
- [12] A.E.B. Hernández, T. Beno, J. Repo and A. Wretland, “Integrated optimization model for cutting data selection based on maximal MRR and tool utilization in continuous machining operations”, CIRP Journal of Manufacturing Science and Technology, vol. 13, pp. 46-50, May 2016.
- [13] A.K. Dubey and V. Yadava, “Multi-objective optimization f Nd: YAG laser cutting of nickel-based superalloy sheet using orthogonal array with principal component analysis”, Optics and Lasers in Engineering, vol. 46, no. 2, pp. 124-132, Feb. 2008.
- [14] M. Gupta and S. Kumar, “Investigation of surface roughness and MRR for turning of UD-GFRP using PCA and Taguchi method”, Engineering Science and Technology, an International Journal, vol. 18, no. 1, pp. 70-81, 2015.
- [15] A.M. Yan, G. Kerschen, P. De Boe and J.C. Golinval, “Structural damage diagnosis under varying environmental conditions - part II: local PCA for non-linear cases”, Mechanical Systems and Signal Processing, vol. 19, no. 4, pp. 865-880, Jul. 2005.
- [16] R.S. Pawade, S.S. Joshi, P.K. Brahmankar and M. Rahman, “An investigation of cutting forces and surface damagein high-speed turning of Inconel 718”, Journal of Materials Processing Technology, vol. 192-193, pp. 139-146, Oct. 2007.
- [17] S. Datta, G. Nandi, A. Bandyopadhyay and P.K. Pal, “Application of PCA based hybrid Taguchi method for multi-criteria optimization of submerged arc weld: a case study”, The International Journal of Advanced Manufacturing Technology, vol. 45, no. 3, pp. 276-286, Nov. 2009.