References
- [1] C.H. Chen and F.J. Shiou. “Determination of Optimal Ball-Burnishing Parameters for Plastic injection Moulding Steel”, International Journal of Advanced Manufacturing Technology, vol. 21, issue 3, March 2003, pp. 177-185.10.1007/s001700300019
- [2] D. Grochała, S. Berczyński and Z. Grządziel. “Stress in the surface layer of objects burnished after milling”, International Journal of Advanced Manufacturing Technology, vol. 72, issue 9, June 2014, pp. 1655-1663.10.1007/s00170-014-5775-x
- [3] R. Gubała, D. Grochała and W. Olszak. „Mikrohydrauliczne narzędzie do nagniatania złożonych powierzchni przestrzennych”, Mechanik, no. 1, 2014, pp. 22-23.
- [4] J. Kalisz, K. Żak, W. Grzesik and K. Czechowski. „Characteristics of surface topography after rolling burnishing of EM AW-AlCu4MgSi(A) aluminum alloy”, Journal of Machine Engineering, vol. 15, no. 1, 2015, pp. 71-80.
- [5] W. Kwaczyński, K. Chmielewski and D. Grochała. „Programowanie frezowania i nagniatania złożonych powierzchni przestrzennych na centrach frezarskich ze sterowaniem wieloosiowym”, in Współczesne problemy technologii obróbki przez nagniatanie, vol. 3, W. Przybylski, Ed., Gdańsk: Politechnika Gdańska, Wydział Mechaniczny, 2011, pp. 179-191.
- [6] L.N. López de Lacalle, A. Lamikiz, J. Muñoa and J.A. Sánchez. “Quality improvement of ball-end milled sculptured surfaces by ball burnishing”, International Journal of Machine Tools & Manufacture, vol. 45, issue 15, December 2005, pp. 1659-1668.10.1016/j.ijmachtools.2005.03.007
- [7] L.N. López de Lacalle, A. Lamikiz, J.A. Sánchez and J.L. Arana. “The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces”, International Journal of Advanced Manufacturing Technology, vol. 32, issue 9-10, April 2007, pp. 958-968.10.1007/s00170-005-0402-5
- [8] A. Rodríguez, L.N. López de Lacalle, A. Celaya, A. Lamikiz and J. Albizuri. “Surface improvement of shafts by the deep ball-burnishing technique”, Surface & Coatings Technology, vol. 206, 2012, pp. 2817-2824.10.1016/j.surfcoat.2011.11.045
- [9] F.J. Shiou and C.H. Chen. “Ultra-precision surface finish of NAK80 mould tool steel using sequential ball burnishing and ball polishing processes”, Journal of Materials Processing Technology, vol. 201, 2008, pp. 554-559.10.1016/j.jmatprotec.2007.11.235
- [10] F.J. Shiou and C.H. Chuang. “Precision surface finish of the mold steel PDS5 using an innovative ball burnishing tool embedded with a load cell”, Precision Engineering, vol. 34, issue 1, January 2010, pp. 76-84.10.1016/j.precisioneng.2009.03.003
- [11] M. Sosnowski and D. Grochała. „Problemy technologii nagniatania powierzchni przestrzennych złożonych na centrach obróbkowych”, Mechanik, no. 1, 2011, pp. 14-18.
- [12] V.P. Kuznetsov, LYu. Smolin, A.J. Dmitrtev, S.Yu. Tarasov, V.G. Gorgots. "Toward control of subsurface strain accumulation in nanostructurin burnishin on hermostrenghened steel”. Surface&Coatings Technol. No. 285 2016, s. 171-178., http://dx.doi.org/10.1016/j.surfcoat.2015.11.045K.
- [13] Żak and W. Grzesik. “Investigation of technological effects of ball burnishing after cryogenic turning of hard steel”, Advances in Manufacturing Science and Technology, vol. 38, no. 1, 2014, pp. 37-52.10.2478/amst-2014-0003