Draft for Revision of the Standards EN 12640 and EN 12641 Regarding the Securing of Cargo on Road Means of Transport

Jagelcak, Juraj; Vrabel, Jan; Nieuwesteeg, Michael

doi:10.1515/logi-2017-0015

Abstract

Since 2014, work regarding the revision of the Standard EN 12642 “Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements” has been done, which is known for users of CODE XL certified swap bodies. Based on the negotiations on the above-mentioned standard, requirements for the revision of other standards for the cargo securing emerged. Currently, Expert group CEN TC 119 WG 7 is working on these standards. This paper discusses about the standards revision regarding the cargo securing.

References

[1] Jagelcak, J. (2015). Loading and securing of cargo in road transport – 2. ed. Zilina: EDIS – publisher University of Zilina, Slovak Republic.
Search in Google Scholar Back to article
[2] Jagelcak, J. & Zamecnik, J. (2015). The stress of lashing points in full-loaded 3.5-tonne van during emergency braking. In LOGI 2015 (pp. 136-152). Pardubice, Czech Republic, from http://logi.upce.cz/issues/2015-01/15.pdf.
Search in Google Scholar Back to article
[3] European standards. (2016). EN 12642. Securing of cargo on road vehicles – Body structure of commercial vehicles – Minimum requirements.
Search in Google Scholar Back to article
[4] Stopka, O., Gasparik, J. & Simkova, I. (2015). The methodology of the customers’ operation from the seaport applying the “Simple Shuttle Problem”. Nase More, 62(4), 283-286. DOI: 10.17818/NM/2015/4.7.10.17818/NM/2015/4.7
Open DOI Search in Google Scholar Back to article
[5] Vlkovsky, M., Pochobradska, K., Foltin, P., Zajicek, V. & Binar, T. (2016). The cargo securing based on European standards and its applicability in off-road transport conditions. In 3rd International Conference on Traffic and Transport Engineering (ICTTE), 24-25 November 2016 (pp. 603-607). Belgrade, Serbia: Scientific research center LDT Belgrade. ISBN 978-86-916153-3-8.
Search in Google Scholar Back to article
[6] Zong, C.Q., Zhang, H.W., Huang, C.Z. & Dong, J.S. (2017) Research on the Influence of Cargo Securing Force with Typical Road Alignments and Vehicle Working Conditions. In 4th International Conference on Transportation Information and Safety (ICTIS), 08-10 August 2017 (pp. 27-32). Banff, Canada: IEEE. ISBN 978-1-5386-0437-3.
Search in Google Scholar Back to article
[7] Cho, S.I., Hwang, J.O., Bang, C.S. & Bae, J.H. (2016). Assessment procedures for mechanical securing components of LNG cargo containment system with potential damages. In 35th ASME International Conference on Ocean, Offshore and Arctic Engineering, 19-24 June 2016 (Article Number: UNSP V003T02A023). Busan, South Korea: AMER SOC MECHANICAL ENGINEERS. ISBN:978-0-7918-4994-110.1115/OMAE2016-54064
Search in Google Scholar Back to article
[8] Muzaffarova, M. & Mirakhmedov, M. (2016). Prospects fixation drift sands physicochemical method. Transport Problems, 11(3), 143-152. DOI: 10.20858/tp.2016.11.3.14.10.20858/tp.2016.11.3.14
Search in Google Scholar Back to article
[9] Krile, S., Peraković, D. & Remenar, V. (2009). Possible Collision Avoidance with Off-Line Route Selection. Promet & Transportation, 21(6), pp. 415-423. ISSN 0353-5320.
Search in Google Scholar Back to article
[10] Lorenc, A., Michnej, M. & Szkoda, M. (2014). An information system aiding the processes of cargo loading and securing in railway transport. In Carpathian Logistics Congress (CLC), 09-11 December 2013 (pp. 595-600). Cracow, Poland: Tanger LDT. ISBN 978-80-87294-50-5.
Search in Google Scholar Back to article
[11] Kabacinski, J. & Wisnicki, B. (2009). Accuracy analysis of stowing computations for securing non-standard cargoes on ships according to IMO CSS Code. Polish maritime research, 16(2), 67-71. DOI: 10.2478/v10012-008-0024-6.10.2478/v10012-008-0024-6
Open DOI Search in Google Scholar Back to article
[12] Wiśnicki, B. & Dyrda, A. (2016). Analysis of the intermodal transport efficiency in the Central and Eastern Europe. Nase More, 63(2), 43-47. DOI: 10.17818/NM/2016/2.1.10.17818/NM/2016/2.1
Open DOI Search in Google Scholar Back to article
[13] Gnap, J., Kalasova, A., Gogola, M. & Ondrus, J. (2010). The Centre of Excellence for transport service and control. Komunikacie, 12(3), 116-120. ISSN 1335-4205.10.26552/com.C.2010.3A.116-120
Search in Google Scholar Back to article
[14] Brosi, S. (2012). Technical approach to secure cargo tracking and monitoring at border crossings. In 19th Intelligent Transport Systems World Congress, ITS 2012, 22-26 October 2012 (pp. AM-00068). Vienna, Austria. Code 101478.
Search in Google Scholar Back to article
[15] Ducarne, L., Ainalis, D. & Kouroussis, G. (2018). Assessing the ground vibrations produced by a heavy vehicle traversing a traffic obstacle. Science of the Total Environment, 612, 1568-1576. DOI: 10.1016/j.scitotenv.2017.08.226.10.1016/j.scitotenv.2017.08.226
Open DOI Search in Google Scholar Back to article
[16] Wang, Q.W., Li, W.F. & Zhao, J. (2015). Design and Implementation of an Intelligent System for Seafarers' “Cargo stowage and securing” Assessment. In International Symposium on Computers and Informatics (ISCI), 17-18 January 2015 (pp. 2483-2490). Beijing, China: Atlantis press. ISBN 978-94-62520-56-1.
Search in Google Scholar Back to article

Draft for Revision of the Standards EN 12640 and EN 12641 Regarding the Securing of Cargo on Road Means of Transport

Abstract

Paradigm

My account