References
- 1. P. Cabot, F. Centellas, E. Perez, and R. Loukili, “Pitting and repassivation processes of Al · Zn · Mg alloys in chloride solutions containing sulphate,” Electrochimica acta1993, 38 (18), 2741-2748.
- 2. J. C. Bailey, F. C. Porter, A. W. Pearson, and R. A. Jarman, “4.1 – Aluminium and Aluminium Alloys,” Corrosion (3rd Edition), pp. 4:3-3:37, Oxford: Butterworth-Heinemann, 1994.
- 3. J. A. Lyndon, R. K. Gupta, M. A. Gibson, and N. Birbilis, “Electrochemical behaviour of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium–magnesium alloys,” Corrosion Science2013, 70, 290-293.
- 4. R. H. Jones, V. Y. Gertsman, J. S. Vetrano, and C. F. Windisch Jr, “Crack-particle interactions during intergranular stress corrosion of AA5083 as observed by cross-section transmission electron microscopy,” Scripta Materialia2004, 50 (10), 1355-1359.
- 5. E. Brillas, P. L. Cabot, F. Centellas, J. A. Garrido, E. Pérez, and R. M. Rodríguez, “Electrochemical oxidation of high-purity and homogeneous Al–Mg alloys with low Mg contents,” Electrochimica Acta1998, 43 (7), 799-812.
- 6. R. S. Mishra, P. S. De, and N. Kumar, “Fundamental Physical Metallurgy Background for FSW/P,” Friction Stir Welding and Processing: Science and Engineering, pp. 59-93, Cham: Springer International Publishing, 2014.
- 7. R. S. Mishra, and Z. Ma, “Friction stir welding and processing,” Materials Science and Engineering: R: Reports2005, 50 (1), 1-78.
- 8. R. Padmanaban, V. Balusamy, and V. R. Kishore, “Effect of axial pressure and tool rotation speed on temperature distribution during dissimilar friction stir welding,” Advanced Materials Research2012, 1934-1938.
- 9. R. V. Vignesh, R. Padmanaban, M. Arivarasu, S. Thirumalini, J. Gokulachandran, and R. Mutyala Sesha Satya Sai, “Numerical modelling of thermal phenomenon in friction stir welding of aluminum plates,” IOP Conference Series: Materials Science and Engineering2016, 149 (1), pp. 012208.
- 10. Z. Ma, “Friction stir processing technology: a review,” Metallurgical and Materials Transactions A2008, 39 (3), 642-658.
- 11. R. Padmanaban, R. Vaira Vignesh, M. Arivarasu, K. P. Karthick, and A. Abirama Sundar, “Process parameters effect on the strength of Friction Stir Spot Welded AA6061,” ARPN Journal of Engineering and Applied Sciences2016, 11 (9), 6030-6035.
- 12. V. V. Ramalingam, and P. Ramasamy, “Modelling Corrosion Behavior of Friction Stir Processed Aluminium Alloy 5083 Using Polynomial: Radial Basis Function,” Transactions of the Indian Institute of Metals2017, 70 (10), 2575-2589.
- 13. S. Ilangovan, R. V. Vignesh, R. Padmanaban, and J. Gokulachandran, “Comparison of Statistical and Soft Computing Models for Predicting Hardness and Wear Rate of Cu–Ni–Sn Alloy,” Progress in Computing, Analytics and Networking, pp. 559-571: Springer, 2018.
- 14. R. V. Vignesh, and R. Padmanaban, “Forecasting Tribological Properties of Wrought AZ91D Magnesium Alloy Using Soft Computing Model,” Russian Journal of Non-Ferrous Metals2018, 59 (2), 135-141.
- 15. B. Yegnanarayana, Artificial neural networks: PHI Learning Pvt. Ltd., 2009.
- 16. S.-C. Wang, “Artificial neural network,” Interdisciplinary Computing in Java Programming, pp. 81-100: Springer, 2003.
- 17. G. Klir, and B. Yuan, Fuzzy sets and fuzzy logic: Prentice Hall New Jersey, 1995.
- 18. S. Sivanandam, S. Sumathi, and S. Deepa, Introduction to fuzzy logic using MATLAB: Springer, 2007.
- 19. R. R. Yager, and L. A. Zadeh, An introduction to fuzzy logic applications in intelligent systems: Springer Science & Business Media, 2012.
- 20. G. F. V. Voort, ASM Handbook Volume 9: Metallography and Microstructures, pp. 1184: ASM International, 2004.
- 21. E. Pouillier, A. F. Gourgues, D. Tanguy, and E. P. Busso, “A study of intergranular fracture in an aluminium alloy due to hydrogen embrittlement,” International Journal of Plasticity2012, 34, 139-153.
- 22. G. M. Scamans, N. J. H. Holroyd, and C. D. S. Tuck, “The role of magnesium segregation in the intergranular stress corrosion cracking of aluminium alloys,” Corrosion Science1987, 27 (4), 329-347.
- 23. Y.-K. Yang, and T. Allen, “Direct visualization of β phase causing intergranular forms of corrosion in Al–Mg alloys,” Materials Characterization2013, 80, 76-85.
- 24. S.-J. Kim, S.-J. Lee, J.-Y. Jeong, and K.-H. Kim, “Electrochemical characteristics of Al–Mg and Al–Mg–Si alloy in sea water,” Transactions of Nonferrous Metals Society of China2012, 22 (S3), 881-886.
- 25. R. Padmanaban, V. Ratna Kishore, and V. Balusamy, “Numerical simulation of temperature distribution and material flow during friction stir welding of dissimilar aluminum alloys.” Procedia Engineering2014, 97, 854-863.
- 26. R. Goswami, G. Spanos, P. S. Pao, and R. L. Holtz, “Precipitation behavior of the ß phase in Al-5083,” Materials Science and Engineering: A2010, 527 (4–5), 1089-1095.
- 27. M. Mezbahul-Islam, A. O. Mostafa, and M. Medraj, “Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical Data,” Journal of Materials2014, 33.
- 28. C. Meng, D. Zhang, H. Cui, L. Zhuang, and J. Zhang, “Mechanical properties, intergranular corrosion behavior and microstructure of Zn modified Al–Mg alloys,” Journal of Alloys and Compounds2014, 617, 925-932.