References
- 1. Martín-Muñoz F.J. Handbook on Lead-bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal- hydraulics and Technologies, 2007, OECD/NEA, Chap. 6.
- 2. Verleene A., Vogt J.-B., Serre I., Legris A. Low cycle fatigue behavior of T91 martensitic steel at 300 °C in air and in liquid lead bismuth eutectic, International Journal of Fatigue 2006, 28, 843-851.10.1016/j.ijfatigue.2005.11.003
- 3. Auger T., Lorang G., Guerin G., et al. Effect of contact conditions on embrittlement of T91 steel by lead-bismuth, Journal of Nuclear Materials 2004, 335, 227-231.
- 4. Schmidt B., Guerin S., Pastol J.-L., et al. Evaluation of the mechanical properties of T91 steel exposed to Pb and Pb- Bi at high temperature in controlled environment, Journal of Nuclear Materials 2001, 296, 249-255.
- 5. Lynch S.P., Metal-induced embrittlement of materials, Materials Characterization 1992, 28, 279289.10.1016/1044-5803(92)90017-C
- 6. Hojná, A., Hadraba, H., Di Gabriele, F., Husák, R., Kuběna, I., Rozumová, L., Marušáková, D. Corrosion-Mechanical Behavior of T91 and 14-19Cr ODS Steels Exposed to flowing Lead-Bismuth, Solid State Phenomena 2016, 258, 627-630.
- 7. Martinelli, L., Balbaud-Célérier, F. Modelling of the oxide scale formation on Fe-Cr steel during exposure in liquid lead-bismuth eutectic in the 450-600 °C temperature range, Materials and Corrosion 2011, 62, 531-542.
- 8. Hojná, A., Hadraba, H., Di Gabriele, F., Husák, R., Rozumová, L., Marušáková, D. Response to load in liquid leadbismuth of T91 and 14-19Cr ODS steels, International conference “Utilization of SUSEN technologies for the Gen IV development”, Husinec, 2016, ISBN 978-80-270-0925-1.
- 9. Černý, M. Korozní vlastnosti kovových konstrukčních materiálů. 1. vyd. Praha: STNL, 1984, 264.
- 10. Auget, T. Fracture mechanics behaviour of the T91 martensitic steel in contact with liquid lead-bismuth eutectic for application in an accelerator driven system, Journal of Nuclear Materials 2011, 415, 293-301.
- 11. Gong, X., Marmy, P., Volodin, A., Amin-Ahmadi, B., Qin, L., Schryvers, D. Multiscale investigation of quasi-brittle fracture characteristics in a 9Cr-1Mo ferritic-martensitic steel embrittled by liquid lead-bismuth under low cycle fatigue, Corrosion Science 2016, 102, 137-152.
- 12. Klečka, J., Di Gabriele, F., Hojná, A. Mechanical properties of the steel T91 in contact with lead, Nuclear Engineering and Design 2015, 283, 131-138.