References
- 1. IS 5075-1985. Indian Standard “Method of Rotating Bar Bending Fatigue Testing of Metals”, 1985 Reaffirmed 2006.
- 2. F. Lefebvre and C. Peyrac.: Understanding of fatigue strength improvement of steel structures by hammer peening treatment. Procedia Engineering 2015, 133, 454-464.
- 3. W.C. Liua and J. Donga: Improvement of fatigue properties by shot peening for Mg-10Gd-3Y alloys under different conditions. Materials Science and Engineering A 2011, 528, 5935-5944.
- 4. H. Soyama and F. Takeo: Comparison between cavitation peening and shot peening for extending the fatigue life of a duralumin plate with a hole. Journal of Materials Processing Technology 2016, 227, 80-87.
- 5. S. Kikuchi et.al.: Effect of shot peening using ultra-fine particles on fatigue properties of 5056 aluminum alloy under rotating bending. Materials Science and Engineering A 2016, 652, 279-286.
- 6. D. Yin, D. Wang, H. Jing and L. Huo: The effects of ultrasonic peening treatment on the ultra-long life fatigue behavior of welded joints. Materials and Design 2010, 31, 3299-3307
- 7. N. A. Ozbek et.al.: Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in the dry turning of stainless steel. Tribology International 2016, 94, 223-233.10.1016/j.triboint.2015.08.024
- 8. J. Berg and N. Stranghoener: Fatigue strength of welded ultra high strength steels improved by high-frequency hammer peening. Procedia Materials Science 2014, 3, 71-76.
- 9. C. Revilla-Gomeza and J-Y. Buffierea: Assessment of the surface hardening effects from hammer peening on high strength steel. Procedia Engineering 2013, 66, 150-160.
- 10. F. Bleicher et.al.: Improving the tribological characteristics of tool and mould surfaces by machine hammer peening, CIRP Annals - Manufacturing Technology 2013, 62, 239-242.
- 11. F. Bleicher et.al.: Mechanism of surface modification using machine hammer peening technology, CIRP Annals - Manufacturing Technology 2012, 61, 375-378.
- 12. F. Lienerta et.al.: Experimental Study on Comparing Intensities of Burnishing and Machine Hammer Peening Processes. Procedia CIRP 2016, 45, 371-374.
- 13. V. Schulze et.al.: Surface modification by machine hammer peening and burnishing, CIRP Annals - Manufacturing Technology 2016, 65, 809-832.
- 14. Z. Lian et.al.: Electrodeposition of tungsten coatings on molybdenum substrates.
- 15. IS 8368:2010 Indian standard Tungsten Carbide Powder for Hard Metals-Specification.
- 16. T. Chen et.al. Influence of surface modifications on pitting corrosion behavior of nickel-base alloy 718. Part 1: Effect of machine hammer peening. Corrosion Science 2013, 77, 230-245.
- 17. M.A.S. Torres, H.J.C. Voorwald, An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel, Int. J. Fatigue 2002, 24, 877-886.
- 18. K. Liu, M.R. Hill, The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons, Tribol. Int. 2009, 42, 1250-1262.
- 19. I. Weich, T. Ummenhofer, Effects of high frequency peening methods on the surface layers and the fatigue strength of welded details, Mater. Manuf. Process. 2011, 26, 288-293.