References
- 1. Collepardi, M.; Moderní beton, 1st ed.; ČKAIT: Pelhřimov, 2009.
- 2. Helland, S.; Navrhování zaměřené na životnost: implementace zásad zahrnutých v model code 2010 do provozní normy ISO 16204. Beton TKS 2013, 6, 3-10.
- 3. Bertolini, L.; et al. Corrosion of Steel in Concrete (Prevention, Diagnosis, Repair), WILEY-VCH Verlag GmBH and Co. KGaA: Weinheim, 2004. 6. Böhni, H.; et al. Corrosion in reinforced concrete structures, 1st ed.; Woodhead Publishing Ltd and CRC Press LLC: Woodhead Publishing Ltd, 2005.
- 4. Böhni, H.; et al. Corrosion in reinforced concrete structures, 1st ed.; Woodhead Publishing Ltd and CRC Press LLC: Woodhead Publishing Ltd, 2005.
- 5. Poursaee, A.; et al. Corrosion of steel in concrete structures 1st ed.; Woodhead Publishing Ltd. Woodhead Publishing Ltd, 2016.
- 6. Andrade, C.; et al. Protection System for Reinforcement. CEB-Bulletin D´Information, 1992, 211, 9-15.
- 7. SVÚOM s.r.o.; TP-136: Povlakovaná výztuž do betonu, SVÚOM, 2000.
- 8. Bittner T.; et al. Experimental Tests of White UHPC Plates Reinforced by PVA Fibres and Textile Glass Reinforcement, Advanced Materials Research 2015, 1124, 83-88.
- 9. Bouška, P.; et al. Experimental investigation of structural element made from high-performance textil concrete loaded by the bending moment, Sborník Fibre Concrete 2015, Praha, 8 s.
- 10. Bittner, T.; et al. Vývoj betonu s nekonvenční výztuží, Workshop Kloknerova ústavu 2015, Praha.
- 11. Walton P. L., Majumdar A. J.; Cement-based composites with mixtures of different types of fibres, Composites 1975, 6 (5), 209-216.10.1016/0010-4361(75)90416-4
- 12. Kume M.; US 4243421-A (Alkali-resistant glass composition) 6/1981.
- 13. Bittner T., Bouška P., Kostelecká M., Vokáč M., Experimental Investigation of Mechanical Properties of Textile Glass Reinforcement, Applied Mechanics and Materials 2015, 732, 45-48.
- 14. Naaman, A. E.; Textile reinforced cement composites: competitive status and research directions, International RILEM Conference on Material Science 2010, Aachen, 22 s.
- 15. Colombo, I.G.; et al. Bending behavior of textile reinforced concrete sandwich beams, Construction and building materials 2015, 95, 675-685.
- 16. Mleziva, J.; Polymery-výroba, struktura, vlastnosti a použití, Sobotáles:Praha, 1993.
- 17. Dongwei W., Zhang. X., Luo S., Li. S.; Preparation and property analysis of melamine formaldehyde foam, Advances in Materials Physics and Chemistry 2012, 2, 63-67.
- 18. Zhang J., Wang X., Zhang S., Gao Q., Li J., Effects of melamine addition stage on the performance and curing behavioue of melamine-urea-formaldehyde (MUF) resin, BioResources 2013, 8 (4), 5500-5514.
- 19. Osswald T. A., Menges G., Material science of polymers for engineers (third edition), Hanser:München, 2012.
- 20. Castro Y., Aparicio M., Moreno R., Durán A., Silica-zirconia sol-gel coatings obtained by different synthesis routes, Journal of Sol-Gel Science and Technology 2005, 35 (1), 41-50.10.1007/s10971-005-3213-0
- 21. Parashar, V. K., Raman V., Bahl O. P.; Thermal evolution of sol-gel derived zirkonia and binary oxides of zirkoniasilica, Journal of Materials Science Letters 1996, 15, 1625-1629.
- 22. Nogami M.; Glass preparation of the ZrO2-SiO2 system by the sol-gel process from metal alkoxides, Journal of Non-Crystalline Solids 1985, 69 (2-3), 415-423.
- 23. Bosman H. J. M., Kruissink E. C., Vanderspoel J., Vandenbrink F.; Characterization of the acid strength of SiO2-ZrO2 mixed oxides, Journal of Catalysis 1994, 148 (2), 660-672.
- 24. Ducháček, V.; Polymery-výroba, vlastnosti, zpracování, použití, VŠCHT Praha, 2011.
- 25. Prokopová, I.; Makromolekulární chemie, VŠCHT Praha, 2007.