Anticorrosive efficiency of alkyd resin-based coatings containing Mg–Zn–Fe mixed oxide-based pigments

A. Kalendová; E. Halecká; K. Nechvílová; M. Kohl

doi:10.1515/kom-2017-0005

.blurhash-client-img { display: none !important; }

Anticorrosive efficiency of alkyd resin-based coatings containing Mg–Zn–Fe mixed oxide-based pigments

Koroze a ochrana materiálu

Volume 61 (2017): Issue 2 (April 2017)

By: A. Kalendová, E. Halecká, K. Nechvílová and M. Kohl

Open Access

|Mar 2017

Abstract

Mixed oxide-based pigments Mg–Zn–Fe with different particle morphologies were prepared by high-temperature solid phase reactions. The core shell pigments containing ferric oxide and non-isometric particles of layered silicates were also prepared. The pigments were tested in paints, the pigment volume concentrations in the modified alkyd resin based binder being 5%, 10%, and 15%. The paint properties were examined by accelerated corrosion tests and by physico-mechanical tests. The effect of the pigment particle morphology on the surface hardness of the paint films was also studied. The influence of pigment volume concentration on the coating properties, and the optimum concentrations providing the most efficient anticorrosive protection were processed. A higher anticorrosion efficiency was observed for the paints with pigments possessing the lamellar particle shape.

References

1. Kalendova A. et al. Anticorrosion efficiency of zinc-filled epoxy coatings containing conducting polymers and pigments, Progress in Organic Coatings2015, 78, 1-20.10.1016/j.porgcoat.2014.10.009
Search in Google Scholar Back to article
2. Benda P., Kalendova A. Anticorrosion properties of pigments based on ferrite coated zinc particle, Physica Procedia2013, 44, 185-194.10.1016/j.phpro.2013.04.023
Search in Google Scholar Back to article
3. Kos I., Schwarz I. G., Suton K. Influence of Warp Density on Physical-mechanical Properties of Coated Fabric, Procedia Engineering2014, 69, 881-889.10.1016/j.proeng.2014.03.066
Search in Google Scholar Back to article
4. Kohl M., Kalendova A. Effect of polyaniline salts on the mechanical and corrosion properties of organic protective coatings, Progress in Organic Coatings2015, 86, 96-107.10.1016/j.porgcoat.2015.04.006
Search in Google Scholar Back to article
5. Anez L. et al. Gas and liquid permeability in nano composites get: Comparison of Knudsen and Klinkenberg correction factors, Microporous and Mesoporous Materials2014, 200, 79-85.10.1016/j.micromeso.2014.07.049
Search in Google Scholar Back to article
6. Marzi T. Nanostructured materials for protection and reinforcement of timber structures: A review and future challenges, Construction and Building Materials2015, 97, 119-130.10.1016/j.conbuildmat.2015.07.016
Search in Google Scholar Back to article
7. Šadauskiene J. et al.: The impact of the exterior painted thin-layer render’s water vapour and liquid water permeability on the moisture state of the wall insulating system, Construction and Building Materials2009, 23 (8), 2788-2794.10.1016/j.conbuildmat.2009.03.010
Search in Google Scholar Back to article
8. Ulbrich M., Kalendova A. Properties of Organic Coatings with Nonisometric Ferrite particles, Physics Procedia2013, 44, 247-255.10.1016/j.phpro.2013.04.030
Search in Google Scholar Back to article
9. Du J. et al. Simulation of the neck prowth of non-isometric biosphere during initial sintering, Acta Metallurgica Sinica (English letters)2009, 22 (4), 263-274.10.1016/S1006-7191(08)60098-8
Search in Google Scholar Back to article
10. Singh S. et al. Magnetodielectrric effect in BaTiO₃/ZnFe₂O₄ core/shell nanoparticles, Journal of Alloys and Compounds2014, 587, 437-441.10.1016/j.jallcom.2013.10.136
Search in Google Scholar Back to article
11. Liu C. et al. Structural analysis and cheracterization of doped spinel CO_2−xM_xTiO₄ (M = Mg²⁺, Mn²⁺, Cu²⁺ and Zn²⁺) coated mica composite. Ceramions International2015, 41, 5537-5546.10.1016/j.ceramint.2014.12.130
Search in Google Scholar Back to article
12. Naredi R., Mahdavian M., Darvish A. Electrochemical examining behavior of epoxy coating incorporation zinc-free phosphate-based anticorrosion pigment, Progress in Organic Coatings2016, 76, 302-306.10.1016/j.porgcoat.2012.09.026
Search in Google Scholar Back to article
13. Darvish A., Naredi R., Attar M.M. The impact of pigment volume concentracion on the protective performance of polyurethane coating with second generation of phosphate based anticorrosion pigment, Progress in Organic Coatings2014, 77, 1768-1773.10.1016/j.porgcoat.2014.05.025
Search in Google Scholar Back to article
14. Sadek M.E.H. et al. Nano Mg_1−xNi_xAl₂O₄ spinel pigments for advanced applications, Spectrochemica Acta Part A: Molecular and Biomolecular Spectroscopy2014, 125, 353-358.10.1016/j.saa.2014.01.115
Search in Google Scholar Back to article
15. Li J. et al. In-situ AFM and EIS study of a solventborne alkyd coating with nanoclay for corrosion protection of carbon steel, Progress in Organic Coatings2015, 87, 179-188.10.1016/j.porgcoat.2015.06.003
Search in Google Scholar Back to article
16. Gergely A et al.. Corrosion protection with zinc-rich epoxy paint coatings embedded with various amounts of highly dispersed polypyrrole-deposited alumina monohydrate, Progress in Organic Coatings2013, 76, 17-32.10.1016/j.porgcoat.2012.08.005
Search in Google Scholar Back to article
17. Sickafus K.E., Wills J.M., Grimes N.W. Structure of spinel, Journal of the American Ceramic Society1999, 82 (12), 3279-3292.10.1111/j.1151-2916.1999.tb02241.x
Search in Google Scholar Back to article
18. Giannakas A.E. et al. Surface properties, textural features and catalytic performance for NO + CO abatement of spinels MAl₂O₄ (M = Mg, Co and Zn) developed by reverse and bicontinous microemulsion method, Applied Surface Science2007, 253 (16), 6969-6979.10.1016/j.apsusc.2007.02.031
Search in Google Scholar Back to article
19. Huang C.L. et al. Low-loss microwave dielectrics in spinel-structured (Mg_1−xNi_x)Al₂O₄ solid solutions, Journal of the American Ceramic Society2010, 93 (7), 1999-2003.10.1111/j.1551-2916.2010.03690.x
Search in Google Scholar Back to article
20. Jacob K.T., Alcock C.B. Activities and their relation to cation distrubution in NiAl₂O₄ MgAl₂O₄ spinel solid solutions, Journal of Solid State Chemistry1977, 20 (1), 79-88.10.1016/0022-4596(77)90053-6
Search in Google Scholar Back to article
21. Singh Yadav R. Impact of Nd³⁺ in CoFe₂O₄ spinel ferrite nanoparticles on cation distrubution, structural and magnetic properties, Journal of Magnetism and Magnetic Materials2016, 339, 109-117.10.1016/j.jmmm.2015.09.055
Search in Google Scholar Back to article
22. Abdur Rehman M., Yusoff I., Alias Y. Fluoride adsorption by doped and un-doped magnetic ferrites CuCl_xFe_2−xO₄: Preparation, characterization, optimization and modeling for effectual remediation technologies, Journal of Hazardous Materials2015, 299, 316-324.10.1016/j.jhazmat.2015.06.030
Search in Google Scholar Back to article
23. Porta P., Stone F.S., Turner R.G. The distribution of nickel ions among octahedral and tetrahedral sites in NiAl₂O₄, MgAl₂O₄ solid solutions, Journal of Solid state Chemistry1974, 11 (2), 135-147.10.1016/0022-4596(74)90108-X
Search in Google Scholar Back to article
24. Sun K. Cation distribution amd magnetic property of Ti/Sn - substituted manganese-zinc ferrites, Journal of Alloys and Compounds2015, 650, 363-369.10.1016/j.jallcom.2015.07.258
Search in Google Scholar Back to article
25. Fernandez A.L., de Pablo L. Formation and the colour developement in cobalt spinel pigments. Pigment & Resin Technology2002, 31 (6), 350-356.10.1108/03699420210449043
Search in Google Scholar Back to article
26. Zawrah M.F., Mamaad H., Meky S. Synthesis and characterization of nano MgAl₂O₄ spinel by the co-precipitated method, Ceramic International2007, 33 (6), 969-978.10.1016/j.ceramint.2006.02.015
Search in Google Scholar Back to article
27. Neto J.B.R., Moreno R. Reological behaviour of kaolin/talc/alumina suspensions for manufacturing cordierite foams, Applied Clay Science2007, 37 (1-2), 157-166.10.1016/j.clay.2006.12.007
Search in Google Scholar Back to article
28. Li Z. et al. Fabric effect on hydraulic conductivity of kaolin under different chemical and biochemical conditions, Soils and Foundations2013, 53 (5), 680-691.10.1016/j.sandf.2013.08.006
Search in Google Scholar Back to article
29. Veselý D., Kalendová A. Anticorrosion efficiency of Zn_xMg_yAl₂O₄ core–shell spinels in organic coatings, Progress in Organic Coatings2008, 62, 5–20.10.1016/j.porgcoat.2007.09.008
Search in Google Scholar Back to article
30. Jotti K.J., Palanivelu K. Facile fabrication of core-shell Pr₆O₁₁-ZnO modified silane coatings for anti-corrosion applications, Applied Surface Science2014, 288, 60-68.10.1016/j.apsusc.2013.09.112
Search in Google Scholar Back to article
31. Kalendova A., Vesely D. Study of the anticorrosive efficiency of zincite and periclase-based core-shell pigments in organic coatings, Progress in Organic Coatings2009, 64 (1), 5-19.10.1016/j.porgcoat.2008.07.003
Search in Google Scholar Back to article
32. Montemor M.F. Functional and smart coatings for corrosion protection: A review of recent advances, Surface and Coatings Technology2014, 258, 17-37.10.1016/j.surfcoat.2014.06.031
Search in Google Scholar Back to article
33. Kalendova A., Rysanek P., Nechvilova K. Investigation of the anticorrosive efficiency of ferrites Mg_1−xZn_xFe₂O₄ with different particle morphology and chemical composition in epoxy-ester resin-based coatings, Progress in Organic Coatings2015, 86, 147-163.10.1016/j.porgcoat.2015.05.009
Search in Google Scholar Back to article
34. Vesely D., Kalendova A., Manso M. V. Properties of calcined kaolins in anticorrosion paints depending on PVC, chemical composition and shape of particles, Progress in Organic Coatings2012, 74, 82-91.10.1016/j.porgcoat.2011.11.017
Search in Google Scholar Back to article
35. Kalendova A. Effect of surface treatment of pigment particles with polypyrrole and polyaniline phosphate on their corrosion inhibiting properties in organic coatings, Progress in Organic Coatings2014, 77 (9), 1465-1483.10.1016/j.porgcoat.2014.04.012
Search in Google Scholar Back to article
36. Singh A.P. et al. Fatty acid based waterborne air drying epoxy ester resin for coating applications, Progress in Organic Coatings2015, 87, 95-105.10.1016/j.porgcoat.2015.05.012
Search in Google Scholar Back to article
37. Gao X.Z., Liu H.J., Cheng F. Thermoresponsive polyaniline nanoparticles: Preparation, characterization, and their potencial application in waterborne anticorrosion coating, Chemical Engineering Journal2016, 283, 682-691.10.1016/j.cej.2015.08.015
Search in Google Scholar Back to article
38. Kalendova A. Methods for testing and evaluating the flash corrosion. Progress in Organic Coatings2002, 44 (3), 201-209.10.1016/S0300-9440(02)00014-0
Search in Google Scholar Back to article
39. Conradi M. et al. Mechanical and anticorrosion properties of nanosilica-filled epoxy-resin composite coating. Applied Surface Science2014, 292, 432-437.10.1016/j.apsusc.2013.11.155
Search in Google Scholar Back to article
40. Czech office for standards, metrology and testing. 2007 Czech technical standard: Coating compositions. Determination of hardness of painting film by pendulum instrumen. CSN 67 3076. Praha.
Search in Google Scholar Back to article
41. Hao Y., Liu F., Man E. Inhibite Behaviour and Mechanism of a Ferrite Inhibition Pigment en Epoxy Paints, Journal of the Electrochemical Society2012, 159 (9), C403-C410.10.1149/2.049209jes
Search in Google Scholar Back to article
42. Lin G. et al. Some nanocomposites based on a glycerol-derived alkyd resin and layered silicates, Molecular Crystals and Liquid Crystals2008, 483 (1), 33-48.10.1080/15421400801898066
Search in Google Scholar Back to article
43. Naderi R., Attar M.M. Electrochemical study of protective behavior of organic coating pigmented with zinc aluminium phosphate as a modified zinc phosphate at different pigment volume concentrations, Progress in Organic Coatings2009, 66 (3), 314-320.10.1016/j.porgcoat.2009.08.009
Search in Google Scholar Back to article
44. Perra D.Y. Effect of pigmentation on organic coating characteristics, Progress in Organic Coatings2004, 50 (4), 247-262.10.1016/j.porgcoat.2004.03.002
Search in Google Scholar Back to article
45. Bierwagen G.P., Hay T.K. The reduced pigment volume concentration as an important parameter in interpreting and predicting the properties of organic coatings, Progress in Organic Coatings1975, 3 (4), 281-303.10.1016/0300-9440(75)80011-7
Search in Google Scholar Back to article
46. Gowri S., Balakrishman K. The effect of the PVC/CPVC ratio on the corrosion resistance properties of organic coating, Progress in Organic Coatings1994, 23 (4), 363-377.10.1016/0033-0655(94)87005-5
Search in Google Scholar Back to article
47. Langer E. et al. Self-stratifying coatings containing barrier and active anticorrisive pigments, Progress in Organic Coatings2011, 71, 162-166.10.1016/j.porgcoat.2011.01.016
Search in Google Scholar Back to article
48. Ahmed N.M. et al. Novel anticorrosive pigments based on waste material for corrosion protection of reinforced concrete steel, Construction and Building Materials2015, 98, 399-396.10.1016/j.conbuildmat.2015.08.111
Search in Google Scholar Back to article
49. Deyab M.A. Effect of carbon nano-tubes on the corrosion resistance of alkyd coating immersed in sodium chloride solution, Progress in Organic Coatings2015, 85, 146-150.10.1016/j.porgcoat.2015.04.003
Search in Google Scholar Back to article
50. Lamanna M.E. Synthesis of an organic semiconductor by polimerization of 3-amino-1,2,4-triazole, Reactive and Functional Polymers2009, 69 (10), 759-765.10.1016/j.reactfunctpolym.2009.06.005
Search in Google Scholar Back to article
51. Liu L. et al. The evaluation of thermal performance of cool coatings colored with high mera-infrared reflective nano-brown inorganic pigments: Magnesium doped ZnFe₂O₄ compounds, Solar Energy2015, 113, 48-56.10.1016/j.solener.2014.12.034
Search in Google Scholar Back to article
52. Emira H. S,. Abdel-Mohsen F.F. The dependence of the corrosion protection of water-borne paints on the concentration of the anticorrosive pigment, Pigment & Resin technology2003, 32 259-263.10.1108/03699420310481604
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/kom-2017-0005 | Journal eISSN: 1804-1213 | Journal ISSN: 0452-599X

Journal RSS Feed

Language: English

Page range: 39 - 53

Published on: Mar 20, 2017

Published by: Association of Czech and Slovak Corrosion Engineers

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Related subjects:

Industrial chemistry,

Chemical engineering,

Materials sciences,

Ceramics and glass

© 2017 A. Kalendová, E. Halecká, K. Nechvílová, M. Kohl, published by Association of Czech and Slovak Corrosion Engineers
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 61 (2017): Issue 2 (April 2017)