The effect of strain amount on corrosion behavior of EDDQ steel sheet

J. Brezinová; J. Slota; M. Tomáš; J. Koncz

doi:10.1515/kom-2016-0020

.blurhash-client-img { display: none !important; }

The effect of strain amount on corrosion behavior of EDDQ steel sheet

Koroze a ochrana materiálu

Volume 60 (2016): Issue 4 (December 2016)

By: J. Brezinová, J. Slota, M. Tomáš and J. Koncz

Open Access

|Dec 2016

Abstract

This paper presents the results of research aimed to measuring the corrosion properties of EDDQ steel sheet. The strain amount influence to the corrosion properties of the steel sheet for drawn parts has been proven by the modern methods of corrosion monitoring such as Electrochemical Impedance Spectroscopy. Corrosion rate was assessed using electrochemical methods in 0.1 M solution of NaCl. Experimental studies have pointed out if strain amount increases the corrosion rate of the steel sheet increases too.

References

1. Vratna, J., et al., Room temperature corrosion properties of AZ31 magnesium alloy processed by extrusion and equal channel angular pressing. J. Mater. Sci. 2013, 48, 4510-4516.
Search in Google Scholar Back to article
2. Bukovinova, L., Hadzima, B., Electrochemical characteristics of magnesium alloy AZ31 in Hank’s solution. Corros. Eng. Sci. Technol. 2012, 47, 352-357.
Search in Google Scholar Back to article
3. Jafari, H., et al., EIS study of corrosion behavior of metallic materials in ethanol blended gasoline containing water as a contaminant, Fuel 2011, 90, 1181-1187.10.1016/j.fuel.2010.12.010
Search in Google Scholar Back to article
4. Mouanga, M., Puiggali, M., Devos, O., EIS and LEIS investigation of aging low carbon steel with Zn-Ni coating, Electrochim. Acta 2013, 106, 82-90.10.1016/j.electacta.2013.05.021
Search in Google Scholar Back to article
5. Frącz, W., Stachowicz, F., Pieja, T., Aspects of verifi cation and optimization of sheet metal numerical simulations process using the photogrammetric system, Acta Metall. Slovaca 2013, 19, 51-59.10.12776/ams.v19i1.86
Search in Google Scholar Back to article
6. Slota, J, et al., The sensitivity of a photogram. method in formability analysis, Acta Mechanica et Automatica 2013, 7, 117-123.10.2478/ama-2013-0021
Search in Google Scholar Back to article
7. Barranco, V., Feliu Jr. S., Feliu, S., EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 1: directly exposed coatings, Corros. Sci. 2004, 46, 2203-2220.
Search in Google Scholar Back to article
8. Walkner, S., Hassel, A.W., Combined chemical and EIS study of the reaction of zinc coatings under alkaline conditions, Electrochim. Acta 2014, 131, 130-136.10.1016/j.electacta.2013.12.177
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/kom-2016-0020 | Journal eISSN: 1804-1213 | Journal ISSN: 0452-599X

Journal RSS Feed

Language: English

Page range: 128 - 131

Published on: Dec 8, 2016

Published by: Association of Czech and Slovak Corrosion Engineers

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Related subjects:

Industrial chemistry,

Chemical engineering,

Materials sciences,

Ceramics and glass

© 2016 J. Brezinová, J. Slota, M. Tomáš, J. Koncz, published by Association of Czech and Slovak Corrosion Engineers
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 60 (2016): Issue 4 (December 2016)